Small Pot Tipping Stopper*For 5 to 8 size pots**Compatible with pots with a diameter of 15cm to 24cm and a height of 21cm**New type that can be installed while keeping the saucer attached*
【About the Pot Tipping Stopper】Have you ever experienced your potted plants, which were beautifully blooming or growing, falling over due to typhoons or sudden wind and rain, causing damage?
As plants and vegetables such as tomatoes, olives, roses, and morning glories grow, their balance with the pot becomes unstable, increasing the risk of falling over in the wind. In the case of ceramic pots, there is also a risk of the pot breaking.
Using the Pot Tipping Stopper increases the stability of the pot, preventing plants from being ruined or the pot from breaking. The stopper, made of durable AES resin, is firmly fixed to the pot with a magic band, ensuring effective prevention of tipping.
It is also convenient because you no longer need to move heavy potted plants indoors every time a typhoon occurs.
【Compatible with pots from 15cm to 36cm in diameter】The Pot Tipping Stopper is available in two sizes:- Small pot type (diameter 15–24cm)- Large pot type (diameter 27–36cm)
It is compatible with many household garden and balcony pots ranging from size 5 to 12, so you can also replace the pots on which the stopper is installed.
【New type that can be installed while keeping the saucer attached】Conventional pot tipping stoppers could not be installed if a saucer was present.The newly introduced "Pot Tipping Stopper for Saucer" allows installation while leaving the saucer attached.
Please choose between the "No Saucer Type" and the "With Saucer Type" according to your usage scene.
【Installation Method】＜1＞ Evenly place four tipping stoppers at the bottom of the pot so that they are at right angles to each other. (See Diagram 1)＜2＞ (When using a saucer) If there is a gap between the top of the tipping stopper and the wall of the pot, attach spacers to the stopper. (See Diagram 2)＜3＞ Thread the fixing band through the long hole at the bottom of each stopper. Then, pass the band through the next stopper’s long hole, and continue sequentially with the remaining stoppers. (See Diagram 3)＜4＞ Firmly press one end of the fixing band against the wall of the pot with your finger, then pull while overlapping the band to fix each stopper tightly against the wall. Cut off any excess band with scissors.＜5＞ Thread the remaining fixing band through the long hole at the top of each stopper and install in the same manner.＜6＞ Confirm that each stopper is installed securely and evenly at right angles to the pot. Once confirmed, the installation is complete. (See Diagram 4)
【Precautions】The Pot Tipping Stopper prevents the pot from tipping over by firmly fixing it to the pot. Please check whether it can be attached to your household pots before purchasing.
*Please note that returns cannot be accepted due to reasons such as inability to install after purchase.*
*Even with the same pot size number from different manufacturers, sizes may vary slightly. For pots smaller than the specified size, the small size is recommended.*
*Cannot be used with the saucer attached.*
【Verification Method】1. Download the actual size template for the Pot Tipping Stopper and print it on A4 paper.Download from the following link:https://file003.shop-pro.jp/PA01095/110/image/tentouuke-202207.pdf
2. Cut out the template with scissors.
3. Hold the template against the pot you wish to install on and check if installation is possible.
【Two key points to check if installation is possible】Point 1:Can the part that inserts into the bottom of the pot be inserted more than half?
Point 2:Does the upper belt hole align without gaps with the pot?
Note that there may be about 1cm of error between the template and the actual pot.For pots with rim designs, please ensure there is enough height to accommodate the installation.
【Specifications for Small Pot Type (5 to 8 size pots)】Product Number: HTS-002SUSet Contents: 4 tipping stoppers, 1 fixing band (205cm), 4 spacersMaterial: AES resin (main body), Polyester (fixing band)Main Body Size: Width 2cm (max) × Length 21cm × Height 16cm*Size per piece*Compatible sizes: 5 to 8 size pots (diameter 15–24cm / height 21cm)