イケダモデリング制作 極小パイク作品 1/150スケール Nナロー6.5mmゲージ
ジオラマサイズ（ドームケース含む）慨寸：幅135ｍｍ 奥行160ｍｍ 高さ160ｍｍレール：6.5mm Nナローゲージカーブ半径R45(ロクハン製道床無しレールを使用)
付属車両：オリジナル3Dプリント製リスボンタイプトラム完成品（動力：トーマモデル製OSOパワー G6.5, P5, WB14）
電源：9V角電池1つ使用。作品台座と一体型コントローラーで照明（街灯と室内）ON/OFF、車両の走行を制御可能。
※手作り作品のため、細部が異なる場合があります。
情報編集：さかつうギャラリー
イケダモデリング制作 極小パイク作品 1/150スケール Nナロー6.5mmゲージ

ジオラマサイズ（ドームケース含む）慨寸：幅135ｍｍ 奥行160ｍｍ 高さ160ｍｍ
レール：6.5mm Nナローゲージ
カーブ半径R45(ロクハン製道床無しレールを使用)

付属車両：オリジナル3Dプリント製リスボンタイプトラム完成品（動力：トーマモデル製OSOパワー G6.5, P5, WB14）

電源：9V角電池1つ使用。
作品台座と一体型コントローラーで照明（街灯と室内）ON/OFF、車両の走行を制御可能。

※手作り作品のため、細部が異なる場合があります。

情報編集：さかつうギャラリー
Produced by Ikeda Modeling: Micro-scale Pike Model, 1:150 Scale, N Narrow Gauge (6.5mm)

Diorama Dimensions (including dome case): Approx. Width 135mm, Depth 160mm, Height 160mm
Rails: 6.5mm N Narrow Gauge
Curve Radius R45 (using Rokuhan rails without ballast)

Included Vehicle: Pre-assembled original 3D-printed Lisbon-type tram (Powered by: Toma Model OSO Power G6.5, P5, WB14)

Power Source: Uses one 9V block battery.
The integrated controller on the display stand allows you to turn the lighting (streetlights and interior) on and off, as well as control the vehicle's movement.

Note: As this is a handmade item, details may vary.

Information edited by: Sakatsu Gallery

"Lisbon Tram Street Corner Diorama B" (Video produced by Sakatsu Gallery)


In Lisbon, the capital of Portugal, vintage trams run along narrow cobblestone streets, skimming past building facades and sidewalks, making tram tours a popular tourist attraction.
I created a small circular diorama featuring the scenery through which this tram runs.


This all-in-one diorama features a PWM controller, LED board, and 9V battery built into the interior of a circular diorama base created using an FDM 3D printer. The 9V battery is housed in a pull-out compartment within the diorama base, making it easy to replace.
The built-in PWM controller allows the included Lisbon Tram to run smoothly at low speeds.
LED lighting (for streetlights and indoor areas) is also included, so you can enjoy the night views.
The Lisbon-style building in the center, the mailbox, the tuk-tuk, the scooter, the cat, the trash can, and other items are original pieces created and painted using a stereolithography 3D printer.
The cobblestones and sidewalks, which are key elements of the tram diorama, were printed using an FDM 3D printer.
The six figures are permanently glued to the diorama.

Ikeda Modeling: List of Works