This is a carburetor for the YAMAHA Blaster 200 buggy YF200 YFS200.

"Example Compatible Vehicles"
For Yamaha
- For Blaster 200 YFS200 YFS200 YFS200 Carb 1988-2006
- For Blaster 200 YFS200SE Special Edition 2006
Specifications "Opening Size"
- Manifold side (outer diameter) approx. 35mm (inner diameter) approx. 28mm / Air cleaner side (outer diameter) 43mm (inner diameter) 39mm
"Overall Size"
- Total length: approx. 15.5cm Width: approx. 8cm
"Hose Length"
- Drain hose (fuel hose) approx. 29cm
- Weight: approx. 804g
"Package Contents"
- Carburetor Kit x 1
- Fuel hose x 1
"Product Description"
This is an aftermarket carburetor for the Yamaha Blaster YF200 YFS200, which is well-regarded as a 2-stroke engine ATV buggy.

Compared to 4-stroke engines, 2-stroke engines are more prone to fouling the carburetor due to oil blowback, which can lead to problems with the main jet (power jet), slow jet (pilot jet, idling jet), needle jet, float valve (float chamber), choke, etc.
In particular, many 2-stroke vehicle malfunctions are related to the slow circuit.

When cleaning the carburetor, it is essential to replace O-rings, gaskets, and packing, and in some cases, the float and jets may also need to be replaced.
Purchasing all the necessary parts can be expensive in terms of both parts cost and labor. However, with this product, you can achieve a direct fit, saving on labor costs.
Furthermore, it can be used for parts harvesting if you wish to use genuine parts.

By replacing the top cap or linkage parts, or through modification, it may be possible to use this as a universal part for other vehicles.
For example, it can be utilized as a component in a kit to convert the throttle lever to a grip throttle like on a motorcycle, offering diverse applications.

Engine malfunctions are often caused by the spark plug, intake system, or carburetor, so replacing them with new ones is recommended when experiencing issues.

Rust and corrosion due to aging are not always visible and can be quite advanced.
This can lead to reduced torque, unstable idling, and decreased fuel efficiency.
Leaving it as is can lead to breakdowns, so if you experience starting problems or a lack of power, replace it promptly.
The Blaster has been discontinued for some time, and the parts needed will eventually cease production and become difficult to obtain. Therefore, we recommend stocking up while you can.

For those who cannot obtain genuine parts or find them too expensive, we highly recommend taking advantage of this cost-effective product.
"Notes"
* Instruction manual is not included.

* If you lack the knowledge and skills, it may cause malfunctions, so please be sure to request assistance from a specialized dealer or mechanic.

2025/12/16 20:20:27#e6ec384a24bfad864f45ba83364ffd0ce2858c90