This is a drill bit with a storage box suitable for concrete, stone, brick, cement, and other materials.

The drill is made of high-quality carbide and 40Cr steel.
It is a highly durable drill with high hardness and wear resistance.

"Easy to carry" Comes with a portable storage box.

Capable of crushing, grooving, corner finishing, and drilling on all materials such as concrete, blocks, bricks, mortar, slate, ALC, bricks, Japanese walls, marble, and ceramic tiles.

Chisels: Four types of special shapes—flat chisel, cold chisel, blue point chisel, U-shaped chisel—constantly ensuring powerful crushing force and suitable for chiseling various structures.

"Note" Be careful that applying excessive force in a direction different from the force of impact when using a chisel as a lever or similar tool may cause the chisel to break or bend.

"SDS Plus Shank" The SDS-Plus shank is designed with a gripping groove to secure the chuck and prevent slipping during work.

Lightweight, can be attached and detached from a hammer drill with one touch.

＊SDS: Electric hammer drills generate gentler but larger impact force compared to impact drills, enabling effective and precise drilling.

＊G8: Made of hard YG8 carbide and superhard steel.
Sturdy nozzle, ideal for applications requiring strong impact.

Can accurately drill into materials such as reinforced concrete.

＊U-shaped groove (spiral design)
The adoption of a U-shaped groove enlarges the contact area of the drive, efficiently transmitting impact rotational force to the tip.
The spiral design allows easy removal of debris during the drilling process.

＊Superhard tip (carbide)
The superhard tip suitable for hard stone materials has a thin cutting edge, allowing for sharp perforation of the workpiece and increased drilling speed.

Chisel: SDS Plus shank (shaft) part 10mm
Flat chisel total length approximately 248mm
Cold chisel total length approximately 247mm
Blue point chisel total length approximately 245mm
U-shaped chisel total length approximately 244mm
"Product Description"
Please use an electric drill with SDS chuck.

Use in impact mode.

Make sure the start switch is off, and unplug the power before attaching or detaching.

Insert until the bit is locked.

Drill perpendicular to the target object.

＊The instruction manual is not included.

＊Since this product is imported, it may have minor scratches or dirt that do not interfere with use.

Please understand this in advance before purchasing.

＊We are not responsible for any direct or indirect damages caused during or after use.

Please use at your own responsibility and understanding.

This is a drill bit with a storage box suitable for concrete, stone, brick, cement, and other materials.

The drill is made of high-quality carbide and 40Cr steel.
It is a highly durable drill with high hardness and wear resistance.
Capable of crushing, grooving, corner finishing, and drilling on all materials such as concrete, blocks, bricks, mortar, slate, ALC, bricks, Japanese walls, marble, and ceramic tiles.

"SDS Plus Shank" The SDS-Plus shank is designed with a gripping groove to secure the chuck and prevent slipping during work.
Lightweight, can be attached and detached from a hammer drill with one touch.

＊SDS: Electric hammer drills generate gentler but larger impact force compared to impact drills, enabling effective and precise drilling.
＊G8: Made of hard YG8 carbide and superhard steel.
Sturdy nozzle, ideal for applications requiring strong impact.
Can accurately drill into materials such as reinforced concrete.

"Set Contents" Drill diameters: φ6mm x total length 160mm, φ8mm x total length 160mm, φ10mm x total length 160mm, φ8mm x total length 210mm, φ10mm x total length 210mm, φ12mm x total length 210mm, φ10mm x total length 260mm, φ12mm x total length 260mm, φ14mm x total length 260mm / 1 point chisel, 2 flat chisels, 1 U-groove chisel
2025/08/04 11:56:16#5db2f7027c253973757fec254f310141d3547001