Special: B01N332QDD
Code: 4907587346490
Brand: Vessel (VESSEL)
Standard: NEJ-123
Size information: Φ6.35mm 82mm
Product size: Height 0.9, Width 6.5, Depth 13.8
About this product
Outer diameter (per piece): Hexagon across flats 6.35mm
Product size (per piece): Φ6.35mm 82mm
Material: Bit material, Nitrile rubber
Screw tip diameter: 1.7mm/2.6mm/3.6mm
Drill tip diameter: 3.7mm/2.7mm/3.7mm
Weight: 18g for 3 pieces
Applicable screw diameters: 1 piece for M3~M4, 1 piece for M5~M6, 1 piece for M6~M8
Usage 1: Use the drill part to make a hole in the target screw. Usage 2: Clean out the chips after drilling. Usage 3: Replace the bit, insert the screw part into the hole drilled with the drill part, rotate, and remove the screw.
› See more Vessel (VESSEL) brand
Product length: 82 millimeters
Material: Nitrile rubber, bit material
Drive system: Drill
Finish type: Shinning about this product
Outer diameter (per piece): Hexagon across flats 6.35mm
Product size (per piece): Φ6.35mm 82mm
Material: Bit material, Nitrile rubber
Screw tip diameter: 1.7mm/2.6mm/3.6mm
Drill tip diameter: 3.7mm/2.7mm/3.7mm
Weight: 18g for 3 pieces
Applicable screw diameters: 1 piece for M3~M4, 1 piece for M5~M6, 1 piece for M6~M8
Usage 1: Use the drill part to make a hole in the target screw. Usage 2: Clean out the chips after drilling. Usage 3: Replace the bit, insert the screw part into the hole drilled with the drill part, rotate, and remove the screw.
› See more
Shipping size: Height 13.8, Width 6.5, Depth 0.9
Shipping weight: 60
用途
Removing stripped or damaged screws, etc.
Features
Bits that can easily remove damaged screws, stripped screws, rusted screws, seized screws, painted screws, etc.
Drilling and screw removal can be performed in the same direction, saving the hassle of switching, and preventing damage to screws and bits caused by using the wrong rotation direction.
The screw parts with frequent damage have a tip angle optimal for screw removal, easily biting into screw threads, and are highly durable.
The screw part is located above the drill part, so for lightly damaged screws, it can be removed without changing the bit, using only one side of the drill part.
Color-coded rings allow easy size identification at a glance.
Description by manufacturer for electric drivers
Vessel (VESSEL) screw removal bit
Both drilling and screw removal rotate counterclockwise, used simply by turning to loosen.
Precautions
Please confirm the correct application, size, and usage before use.
Overloading can cause screw damage or injury.
Do not use impact drivers with shocks.
The drill part immediately after drilling becomes hot and may cause burns, so please be careful.
Be careful to prevent damage to the drill and scattering of chips.
Wear protective glasses, and do not bring hands or face close to the rotating blades or chips.
Stop use immediately if any abnormalities are observed.
Cannot be used on screws with strong fixation. Keep out of reach of children at home.
Vessel (VESSEL) Cushion Drill for Metalwork, Drill Bit 6.0mm AMD-6.0
Vessel (VESSEL) Concrete Drill Bit Cushion Drill 6.5mm ACD-6.5
Vessel (VESSEL) Kessaku Drill Large Diameter Hole Drilling Drill Bit for Metal 13.0mm KMD-13.0
Vessel (VESSEL) Cushion Drill (Pilot Cone) for 6mm ATD-6
Vessel (VESSEL) Screw Removal Bit for Stripped Screws, Damaged Screws M6~M8 NEJ-3
Add to cart
Add to cart
Add to cart
Purchase options
Add to cart
Customer reviews
4.1 out of 5 stars
758
4.2 out of 5 stars
269
4.0 out of 5 stars
63
4.5 out of 5 stars
14
3.8 out of 5 stars
1,425
Price
733
733
1,070
1,070
2,280
2,280—
No data
556
556
Type: Cushion drill (for metal), Cushion drill (for concrete), Kessaku drill, Cushion drill (pilot cone), Screw removal bit
Model series: AMD, AC, KMD, ATD, NEJ
Uses: For drilling holes in iron, light metals, synthetic resins, wood, etc., and tapping. For drilling holes in mortar, blocks, bricks, ALC, gypsum board, etc., and for inserting plug anchors or pre-drilling for plugless screws. The tip and base have different angles with an irregular spiral to improve chip removal and workability. The X-shaped shinning provides good bite, eliminating the need for a pilot punch. Suitable for drilling holes in wood, laminated wood, bamboo, gypsum board, resin, and other materials prone to cracking. Durable straight shank allows for drilling in hardwoods. Both drilling and screw removal rotate counterclockwise, used simply by turning to loosen.
| Product # |
202508240609194907587346490 |
What is ZenPlus?
ZenPlus is an online shopping platform connecting Japan with the rest of the world. We're part of the ZenGroup, Inc. umbrella in Osaka, Japan.
Are items authentic?
Our sellers' agreement fully compels all stores to list only authentic items. We help you buy exclusive and authentic items from Japan, online!
Do you ship to my country?
We ship to all countries where Japan Post air freight services and international couriers currently operate. We don't use surface mail.
How long does shipping take?
Domestic shipments generally reach our warehouse in a few days, but may in certain specific cases take a week or more. International shipments can take anywhere from several days to several weeks to reach you after leaving our warehouse, depending on if you choose Standard or Express shipping.
Please contact our support team from the Questions section on your account page if you have any questions about the timing of your parcel.
How much is shipping?
Shipping costs depend on the size, weight, and destination of your parcel. We provide shipping costs for your order at checkout.
Will I be charged a customs (import) fee?
It depends on your country and its customs regulations. Our service does not cover duties and import taxes — in general, if the customs office in your country applies charges to your package, you are required to pay them.
