Code: 4907587031570

Brand: VESSEL

Model: DXH-600

Size information: 600mm

Product size: height 60, width 1.3, depth 1.3

About this product
Total length: 600mm
Bit insertion: 6.35mm
Chuck outer diameter: 13mm
With rotating grip
Country of origin: Japan
› See more VESSEL brand
Product length: 6E+2 millimeters
Material: Shank: bit material, Sleeve: aluminum alloy, Pipe: aluminum alloy
Drive system: cross
Finish type: glossy finish About this product
Total length: 600mm
Bit insertion: 6.35mm
Chuck outer diameter: 13mm
With rotating grip
Country of origin: Japan
› See more

Shipping size: height 64.2, width 3.1, depth 1.6

Shipping weight: 250g

Applications
Tight and recessed places, high places for screw tightening, etc.
Features
Chuck diameter 13mm. Does not get caught in narrow places.
Using a push-type sleeve chuck, the attached bit is less likely to fall off.
Aluminum sleeve with anodized finish, excellent corrosion resistance. Size is color-coded.
Can be used with double-ended bits, sockets, and grinding wheels or brushes with hex shank.
The shaft part is made of Dihard steel fully heat-treated, resistant to twisting and bending.
Adopts a round 8mm shank. Less torque cross.
Equipped with a rotating grip that can hold the shaft for stable tightening. Manufacturer's description
Improves work efficiency with electric screwdrivers

On-site, working in unstable and unnatural postures such as crouching or twisting can cause foot and back pain, and it is difficult to move quickly to the next step, leading to decreased work efficiency. The "Slim Long Bit Holder" is adopted to address this.

The Slim Long Bit Holder is one of the attachments for electric screwdrivers. By extending between the electric screwdriver and the bit, it allows smooth screw tightening in "narrow" and "recessed" places that have been difficult until now, while using your usual bits.

Using the Slim Long Bit Holder also reduces the burden on the legs, hips, and entire body, improving work efficiency and reducing fatigue-related mistakes.

Various ways to use the Slim Long Bit Holder

Automobile maintenance

Removing hose clamps and ducts inside car engine rooms often involves screws in hard-to-reach narrow gaps, making maintenance laborious. Using the Slim Long Bit Holder allows the bit to reach into tight spaces inside the engine room, enabling efficient maintenance.

Equipped with a locking mechanism to hold the bit, so there is no worry of the bit falling out during work.

Facility maintenance

In repairs around toilets and water-related areas, pipes and water taps are often located deep in walls or floors, making maintenance difficult.

Also, around tanks, the space is very narrow, and when starting work, tools may not reach the screws.

Using the Slim Long Bit Holder makes tightening pipes and adjusting water taps, using a minus bit, easier.

Especially around tanks, where space is designed to be as wide as possible, the long bit holder becomes an essential tool.

Demolition work

Removing hanging bolts for air conditioners, full-thread bolts, and ceiling brackets often involves working on ladders, which causes fatigue from frequent climbing and descending.

Building scaffolding with a ladder makes movement easier, but from a safety perspective, it is required to lower the work platform as much as possible to reduce injury.

Using the Slim Long Bit Holder eliminates the need for ladder work, reducing fatigue from climbing. It also allows lowering the work platform when using a ladder. Care must be taken to prevent the full-thread bolts from falling.

Construction company

For tightening roof bolts, a deep socket is directly attached to an electric screwdriver, but since work often involves downward directions, it can put strain on the legs and hips.

Also, staying in a crouched position makes it difficult to move to the next step, reducing work efficiency.

Connecting the Slim Long Bit Holder to a deep socket allows the socket to reach with a slightly bent posture, reducing fatigue on the legs and hips. Additionally, replacing the tip tool with a wire wheel makes bolt polishing and rust removal during renovations more convenient.

Steelworks

Burrs and spatters after welding structural steel are usually removed with dedicated tools like grinding tools, but obstacles can prevent electric tools from reaching deep inside.

Burrs and spatters can cause "snags" or "roughness" during painting later, reducing product quality.

Connecting the Slim Long Bit Holder to a mounted grinding wheel allows the tip tool to be inserted into gaps around obstacles.

Environmental maintenance

Removing rust and chamfering pipes used outdoors often involves dedicated tools like wire brushes, but obstacles can prevent electric tools from reaching deep inside.

Using a Slim Long Bit Holder matched to the pipe length enables internal surface grinding and chamfering from gaps around obstacles. For chamfering, selecting a bit holder with a rotating grip improves chamfering accuracy by preventing shaft wobble.