Code: 4907587031556

Brand: VESSEL

Specification: DXH-350

Size information: 350mm

Product size: height 35mm, width 1.3mm, depth 1.3mm

Total length: 350mm
Bit insertion: 6.35mm
Chuck outer diameter: 13mm
With rotating grip
Country of origin: Japan
› See more Total length: 350mm
Bit insertion: 6.35mm
Chuck outer diameter: 13mm
With rotating grip
Country of origin: Japan
› See more

Shipping size: height 40.6mm, width 3.5mm, depth 2.5mm

Shipping weight: 150g

Uses
For tightening screws in narrow, recessed areas, high places, etc.
Features
Chuck diameter 13mm. Does not get caught in narrow places.
Uses a push-type sleeve chuck, making it less likely for the attached bit to fall out.
Aluminum sleeve with anodized finish, excellent corrosion resistance. Size is color-coded.
Can be used with double-ended bits, sockets, and grinding wheels or brushes with hex shank.
The shaft part is made of Dihard steel fully heat-treated, resistant to twisting and bending.
Uses an 8mm round shank. Less torque cross.
Equipped with a rotating grip to hold the shaft for stable tightening. Manufacturer's description
Increases work efficiency with electric screwdrivers

In the field, working in unstable and unnatural postures such as crouching or twisting can cause foot and back pain, and it can be difficult to move quickly to the next step, leading to decreased work efficiency. The adopted solution is the "Slim Long Bit Holder."

The Slim Long Bit Holder is one of the attachments for electric screwdrivers. By extending between the electric screwdriver and the bit, it allows smooth screwing in "narrow" and "recessed" places that have been difficult until now, while using the usual bit.

Using the Slim Long Bit Holder also reduces the burden on the legs, hips, and entire body, improving work efficiency and reducing fatigue-related mistakes.

Various ways to use the Slim Long Bit Holder

Automobile maintenance

Removing hose clamps and ducts inside car engine compartments often involves screws in narrow gaps that are hard to reach, making maintenance time-consuming. Using the Slim Long Bit Holder allows the bit to reach into tight spaces inside the engine compartment, enabling more efficient maintenance.

With a lock mechanism to hold the bit, there is no worry about the bit falling out during work.

Equipment maintenance

Repairing water-related fixtures such as toilets often involves pipes and water valves located deep in walls or on floors that are hard to reach, making maintenance difficult.

Also, around the tank area is very narrow, and starting work sometimes results in tools not reaching the screws.

Using the Slim Long Bit Holder makes tightening pipes and adjusting water valves, using a Phillips bit, easier and less troublesome.

Especially around the tank, designed to maximize space, the long bit holder is essential.

Demolition work

Removing hanging bolts for air conditioners, such as full-thread bolts and ceiling brackets, is done using a ladder, but frequent climbing and descending causes fatigue.

Building scaffolding on a ladder makes movement easier, but from a safety perspective, lowering the work platform as much as possible to reduce injury is required.

Using the Slim Long Bit Holder eliminates the need for ladder work, reducing fatigue from climbing. It also allows lowering the work platform when using a ladder. Be careful of falling full-thread bolts.

Construction companies

Tightening roof bolts is done by directly attaching deep socket to an electric screwdriver, but downward work is often continuous, which can strain the legs and hips.

Also, staying crouched makes it difficult to move to the next step, reducing work efficiency.

Connecting the Slim Long Bit Holder to a deep socket allows the socket to reach with a slightly bent posture, reducing fatigue in legs and hips. Additionally, replacing the tip tool with a wire wheel makes it convenient for bolt polishing and rust removal during renovations.

Steelworks

Removing burrs and spatter after welding structural steel is done with dedicated tools like grinding tools, but obstacles can prevent electric tools from reaching deep inside.

Burrs and spatter can cause "snags" or "roughness" during painting later, reducing product quality.

Connecting the Slim Long Bit Holder to a mounted grinding wheel allows inserting the tip tool into gaps around obstacles.

Environmental maintenance

Removing rust and chamfering pipes used outdoors is done with dedicated tools like wire brushes, but obstacles can prevent electric tools from reaching deep inside.

Using a Slim Long Bit Holder matched to the pipe length enables grinding the inner surface or chamfering through gaps in obstacles. For chamfering, selecting a bit holder with a rotating grip improves accuracy by preventing shaft wobble.