＊Achieves clear and satisfying transparency＊
Ideal for making jewelry and accessories, producing a delicate and luxurious finish.
Increases transparency and makes the beauty stand out.
＊Compatible with coloring agents＊
Because it is compatible with coloring agents, mixing is easy.
Also, it is less likely to fade after curing, so you can enjoy beautiful colors for a long time.
＊Compatible with inclusions＊
Inserting dried flowers, shells, or small parts creates an even more wonderful piece.
Less likely to form bubbles.
Can achieve a beautiful finish.
＊Large capacity＊
Perfect for practice and making works. Recommended for both beginners and veterans in hobbies.
＊Less prone to yellowing＊
Even after a long time, color unevenness and yellowing do not stand out, allowing you to maintain a sparkling transparent look over time.
＊Short curing time＊
By applying UV-LED light, it cures quickly in about 2 minutes, saving time and increasing efficiency.
＊Good flowability＊
Has good flowability, allowing it to be poured into fine molds without bubbles, enabling the creation of more beautiful works.
＊Low-irritant material＊
VOC-free and DIY-friendly. This UV resin is non-toxic, odorless, and made from high-quality, harmless materials, making it environmentally friendly.
Caution
Notes on curing resin
If stickiness remains after curing, wiping with alcohol wipes and leaving for about 1 minute may resolve the stickiness.
When curing resin, expose both sides to UV light, and after one side is cured, turn the silicone mold over and irradiate again.
If you thoroughly irradiate using this method, you can finish without stickiness.
Touching the resin before it fully hardens may leave fingerprint-like stickiness.
Oil from your hands, fine dust, or debris can also cause poor curing, so to confirm proper curing, lightly touch the edges with a toothpick.
Resin is incompatible with moisture and may also have poor compatibility with coloring agents, which can cause curing issues.
Using coloring agents specifically for UV resin can prevent curing problems.
When using silicone molds, insufficient initial curing may leave stickiness.
Since the bottom is harder for UV light to reach, caution is needed.
Regular maintenance can prevent dirt and deterioration.
If the UV light becomes old and the UV output decreases, curing may become difficult.
Depending on the inclusions or molds, UV transmittance may decrease.
Resin cures when exposed to UV light, so be careful not to overload with parts.
Methods to eliminate bubbles
Pierce large bubbles with the tip of a toothpick, bamboo skewer, needle, awl, or extended clip to burst them.
To scoop out bubbles, a cotton swab can be used effectively.
For small bubbles, gather them at one point with the tip of a toothpick and lift them off by rolling over to the opposite side.
Warming UV resin lowers its viscosity, making bubbles easier to escape.
Heating bubbles with an embossing heater can make them disappear.
Applying vibration causes bubbles to rise to the surface of the UV resin, where they disappear upon reaching the surface.
Precautions for use
＊Avoid direct sunlight and store in a dark place below 20°C＊
＊If it contacts skin, wash immediately with soap and water＊
＊If it gets into your eyes, rinse immediately with plenty of water and seek medical attention＊
＊If accidentally swallowed, seek medical attention immediately＊
"Satisfying transparency" ButiResin's high-quality UV resin is ideal for handmade accessory making.
Achieves a bright, transparent finish and maintains product durability and beauty.
Suitable for various creative projects and can be enjoyed at home.
"High quality and safety" Beauty Resin is made from VOC-free, non-toxic, and harmless materials.
It has no strong odor, is environmentally friendly, and safe to use.
Since it is a smooth type, it does not leave stickiness.
It does not shrink or warp, making it easy for beginners to use.
"Rapid curing" Compared to two-part resins, curing time is shorter, allowing you to enjoy a beautiful finish in a short time.
The nozzle design helps pour the liquid into molds easily.
"Wide range of uses" 360g large capacity, cost-effective. Perfect as a gift for family or friends interested in UV resin crafts.
Can be used for earrings, hairbands, necklaces, keychains, smartphone cases, etc.
In this way, not only accessories but also keychains and small items can be easily made with UV resin.
2025/09/19 17:08:43#40a3a6b3f0d1ba89115a79f4eb79c22a5120520d
| Product # | 2BJW0DGR14 |
|---|---|
| Specifications |
サイズ: 460g |
You don't need to be in Japan to shop like the Japanese. Sign up for a free account on ZenPlus now and enjoy buying and shipping to over a hundred countries, directly from Japanese online stores. You can ship your items internationally through JP Post (EMS, Airmail), UPS, DHL, FedEx, and other services. Get all the hottest items from Japan such as anime figures, Nendoroids, Nintendo and other video games, Hello Kitty and other kawaii plushies, fishing tackle, Japanese street fashion, Seiko and other watches from Japan, ramen and other Japanese foods, idol merchandise, and much, much more!
We work directly with Japanese shops registered with ZenPlus, so all internal processes are faster and more efficient - the result is a swift and affordable service, ready for you when you need it most. You have instant access to over 1,000 stores in Japan with just one click! Shop just as if you were in Japan, without spending a fortune. We'll get you the best deal possible from a vast collection of items from Japan. Join the ranks of people who prefer ZenPlus as their Japanese online marketplace.
We protect you, the buyer. Communication can be one of the biggest barriers when buying from Japan online, but it doesn't have to be that way. With ZenPlus, you are protected from many of the risks of international e-commerce: We'll take care of any questions, claims, and requests for the seller that you might have. We can provide a full refund if an item is not genuine, and a partial refund if it's not as promised. Feel free to ask us for more info about any of the items or shops on ZenPlus!