For storage without shelf peg holes, an adhesive shelf support that allows adding an extra shelf layer
This product is an adhesive shelf support that can be used as a substitute for xx shelf pegs in furniture without peg holes.
Simply attach four pieces at the four corners of the shelf board and place the shelf, creating a new tier without drilling holes.
No pre-drilling, no drill, no peg pins needed.

For storage without shelf peg holes, an adhesive shelf support that allows adding an extra shelf layer
This product is an adhesive shelf support that can be used as a substitute for xx shelf pegs in furniture without peg holes.
Simply attach four pieces at the four corners of the shelf board and place the shelf, creating a new tier without drilling holes.
No pre-drilling, no drill, no peg pins needed.

Support with four pieces per tier, supporting corners firmly, with an approximate load capacity of 5kg
The support parts are designed with a two-directional extension at the center, with the back side contacting the side panel of the furniture measuring 3x2.5cm, and the top part contacting the shelf board measuring 2.5x2.5cm.
By supporting evenly at four points, the structure allows safely placing books, cups, dishes, small items, etc., with a rough weight limit of about 5kg per shelf.
The transparent clear ABS resin blends easily into the background, making the added shelf harmonize with the furniture.

Three-step process of wiping, peeling, and sticking to complete one tier—tool-free installation
(1) Wipe the contact surface of the furniture side panel with a cloth to remove oil and water, then dry thoroughly (2) Peel off the backing of the four adhesive strips sequentially (3) Position the shelf at the desired height, then press each of the four corners (front left, rear left, front right, rear right) to adhere, pressing out air for a secure fit.
No need for an electric drill, level, or peg pins, making it easy for those unfamiliar with DIY or elderly users.
After installation, do not place heavy objects immediately; wait about 6 to 12 hours to allow the adhesive surface to firmly bond to the furniture surface.

Set of 16 pieces = four shelves' worth, capable of quickly supporting four tiers of shelves across the entire house
Enhance storage capacity of existing furniture such as living room bookshelves, kitchen dish cabinets, bedroom storage boxes, entryway storage, and bathroom shelves without purchasing new furniture, even if they lack peg holes.
Since it only needs to be attached to the side panels of furniture, it is designed for easy repositioning according to seasonal organization or furniture reuse.

Product specifications: Material: ABS resin (clear transparent) / Size: Adhesive part 7x7cm, Support part width 2.5cm x height 3cm x depth 2.5cm / Number of pieces used per shelf: 4 (supporting four corners) / Load capacity: approximately 5kg per tier / Set quantity: 16 pieces (= four shelves) / Usage: For adding shelves inside existing storage furniture without peg holes (bookshelves, dish cabinets, storage boxes, closets, etc.) / Suitable surfaces: smooth painted wood, MDF, decorative plywood, acrylic, glass, tiles, and other hard surfaces
Precautions: Please wipe off dirt, oil, and water from the installation surface and dry thoroughly before attaching / Once peeled, the adhesive strength decreases, so do not reuse on the same surface / May not adhere well to rough natural wood, textured painted surfaces, easily peeling surfaces, or fabric-covered furniture.
2026/06/19 15:59:33#9e155dfd40f30742baea9a222d32d294d0f60a53