Code: 4953488300260

Brand: TONE (TONE)

Model: T4DT200H

Product color: Black

Size information: Drive square: 12.7mm (1/2)

Product weight: 1280

About this product
Drive square dr.A (mm): 12.7
Specification 1: Capacity range minimum~maximum (N·m) 40~200 / Minimum display (N·m) 5 / Display digit count (N·m) 0.1 / Display unit N·m / Number of teeth (pieces) 48 / Torque accuracy ±3%
Specification 2: Operating temperature range -10 ~ 60 / Storage temperature range -20 ~ 70 / Humidity 90% RH or less
Specification 3: Battery type 2 AA alkaline batteries / Battery life: approximately 118 hours of continuous operation (LED OFF), approximately 12 months in standby mode (LED OFF). Battery life varies depending on usage and storage conditions. When battery level is low, the power automatically turns off.
Specification 4: Tightening status notification function, pass/fail judgment function, data storage and transfer function, measurement mode switching function, supports measurement in both directions, comes with calibration certificate, sensor-equipped grip
Dimensions: Total length 520mm, weight 1.28kg (battery weight not included)
Accessories: Communication software CD 1, USB communication cable 1, 2 AA alkaline batteries, calibration certificate (with traceability system diagram) 1, instruction manual 1, resin case 1
Calibration certificate validity: If unused, valid for 1 year from calibration date / If used within less than 1 year from calibration date, valid for 1 year from start of use or up to 10,000 tightening cycles.
› See more Color: Black
Brand: TONE (TONE)
Material: ABS
Product length: 520 millimeters
Product weight: 1.28 kilograms About this product
Drive square dr.A (mm): 12.7
Specification 1: Capacity range minimum~maximum (N·m) 40~200 / Minimum display (N·m) 5 / Display digit count (N·m) 0.1 / Display unit N·m / Number of teeth (pieces) 48 / Torque accuracy ±3%
Specification 2: Operating temperature range -10 ~ 60 / Storage temperature range -20 ~ 70 / Humidity 90% RH or less
Specification 3: Battery type 2 AA alkaline batteries / Battery life: approximately 118 hours of continuous operation (LED OFF), approximately 12 months in standby mode (LED OFF). Battery life varies depending on usage and storage conditions. When battery level is low, the power automatically turns off.
Specification 4: Tightening status notification function, pass/fail judgment function, data storage and transfer function, measurement mode switching function, supports measurement in both directions, comes with calibration certificate, sensor-equipped grip
Dimensions: Total length 520mm, weight 1.28kg (battery weight not included)
Accessories: Communication software CD 1, USB communication cable 1, 2 AA alkaline batteries, calibration certificate (with traceability system diagram) 1, instruction manual 1, resin case 1
Calibration certificate validity: If unused, valid for 1 year from calibration date / If used within less than 1 year from calibration date, valid for 1 year from start of use or up to 10,000 tightening cycles.
› See more

Shipping size: Height 7, Width 13.8, Depth 68

Shipping weight: 2340

Achieve torque management easily with digital technology without relying on intuition. (Tightening status notification function)
You can register up to 9 preset target torque values. The pass/fail judgment tolerance can be set in 1% units, and if the pass/fail function is ON, the LED lamp, buzzer sound, and LCD display will notify the pass/fail result after measurement. (Pass/fail judgment function)
Up to 250 measured torque values can be registered. When connected to a PC with the included USB communication cable, data can be transferred as a CSV file. (Data storage and transfer function)
Measurement modes include Track mode (values change according to torque fluctuation) and Peak mode (displays maximum torque applied). (Measurement mode switching function)
Measurement in both directions is possible. (Supports measurement in both directions)
Comes with a calibration certificate proving calibration with a standard traceable to national standards. (Calibration certificate included)
Even if the pressure center deviates, accurate torque measurement is possible with the sensor inside the grip. (Sensor-equipped grip)
One-push operation allows easy attachment and detachment of sockets. Socket replacement is easy and secure during work. Equipped with a hole for attaching a safety rope, suitable for preventing falls during high-altitude work.
Convenient storage and portability in a dedicated resin case. Manufacturer's description
TONE Ratchet Digit Torque TDTH Series

Suitable for assembly and maintenance work on industrial machinery, analytical instruments, automobiles, etc. Achieve easy torque management with digital technology without relying on intuition.

The tightening status is notified via LED lamp, buzzer sound, and LCD display relative to the preset torque value.

Convenient for storage and transport in a dedicated resin case.

Please note that the color may vary depending on the selected model, as the image is for illustration purposes.