梅桜堂（ばいおうどう）社製 塗装済みキット HO(1/87)スケール 人形の身長が約2cmサイズ
林鉄シリーズ杉沢の2線機関庫II
品番：ST-027-87C完成サイズ：幅92mm×奥行176mm×高さ66mm材質：ペーパー（紙）、MDF、透明樹脂
備考：本製品はHOナロー（縮尺が1/87スケールで線路幅は9mm）に対応して設計しています。モデルワーゲンと梅桜堂のJV企画によって商品化されています。・着色済みの硬質紙を使用・窓ガラス用にカット済みプラ板付属・扉は開閉できる可動式・屋根は脱着式・作業机と馬 各2セット付属HOe modell
※使用する工具類：カッターナイフ、ピンセット、接着剤（クラフトボンド、または木工用ボンドをお勧めします。）※機関庫のみ。地面や車輌、レールは付属しません。
情報編集：さかつうギャラリー
梅桜堂（ばいおうどう）社製 塗装済みキット HO(1/87)スケール 人形の身長が約2cmサイズ

林鉄シリーズ
杉沢の2線機関庫II

品番：ST-027-87C
完成サイズ：幅92mm×奥行176mm×高さ66mm
材質：ペーパー（紙）、MDF、透明樹脂

備考：本製品はHOナロー（縮尺が1/87スケールで線路幅は9mm）に対応して設計しています。
モデルワーゲンと梅桜堂のJV企画によって商品化されています。
・着色済みの硬質紙を使用
・窓ガラス用にカット済みプラ板付属
・扉は開閉できる可動式
・屋根は脱着式
・作業机と馬 各2セット付属
HOe modell

※使用する工具類：カッターナイフ、ピンセット、接着剤（クラフトボンド、または木工用ボンドをお勧めします。）
※機関庫のみ。地面や車輌、レールは付属しません。

情報編集：さかつうギャラリー
Pre-painted kit HO (1:87) scale, made by Baioudou, dolls approx. 2cm in height size

Forest Railway Series
Sugisawa 2-line locomotive depot II

Part Number: ST-027-87C
Finished size: 92mm (width) X 176mm (depth) X 66mm (height)
Material: Paper (paper), MDF, transparent resin

Remarks: This product is designed for HO narrow (scale is 1:87 scale and track gauge is 9mm).
Commercialized through a JV project between Modelwagen and Baioudou.
Pre-colored hard paper is used.
Pre-cut plastic plates are included for the window glass.
Doors are movable and can be opened and closed.
Roof is removable.
2 sets each of work desk and horses are included.
HOe modell

Note: Tools: knife, tweezers, glue (craft bond or woodworking bond recommended)
Note: Engine house only. Ground, cars and rails not included.

Information editing: Sakatsu Gallery

This authentic structure, which has been reproduced once since its release by Modelwagen in 2011, is a "two-line locomotive depot in Sugisawa."
This time, Modelwagen and Baioudou have formed a JV and reincarnated it as a paper kit.
Anyone interested in forest railways will know about it, and even if it is not specific to Sugisawa, it could be used in various ways as a locomotive depot for general narrow (1/87 scale with 9mm track gauge) locomotives.
The size of, approximately 90mm x 180mm, is perfect for small layouts as well as for easy diorama building.

The column assembly is a full-fledged structure that would make evenarchitects gasp.
It is not a difficult task becauseany of those parts are assembled on a hoso assembly.
The way it is finished step by step while you are rather enjoying it makes you feel like a log house builder.

The resin parts are made with a high-performance 3D printer and have some transparency and flexibility.
Please useairbrush or spray paint and detach the support material.
paint colors can be used to create a seasonal look or to make it look like another plant.
If you leave the transparency without applying a thick coat, you can also express the freshness of the plants.
Water-based acrylic paint can be applied by brush.

Click here for the list of Baioudou's HO (1/87) scale products

Note: Tools to use: cutter knife, tweezers, glue (craft bond or woodworking bond is recommended).