M4x20mm screw and anchor plug stainless steel hook that can withstand up to 5kg.
A versatile product that can be installed on any wall.
A set of 6 wall hooks made of stainless steel that are resistant to rust.
Unlike seal-type hooks, fixed with three M4x20 longer screws.
Different load capacity from seal-type.
Can support up to 5kg.
With a washer, the part where the screw is fixed is hidden, so it does not spoil the appearance.
Simple but timeless design.
Expected to be useful in homes such as living rooms, bedrooms, closets, kitchens, as well as in humid areas like bathrooms, dressing rooms, washrooms, and toilets due to rust-resistant stainless steel.
Can also be used in changing rooms, fitting rooms, companies, schools, club rooms, restaurants, izakayas, beauty salons, depending on your ideas.
When used with the hanger set, it is sturdy enough to hang coats and more.
The secret to the 5kg load capacity is not supporting with thick short screws, but rather dispersing the load across three points with thin, long screws.
Because the screws are thin, they are less likely to leave marks after removal.


The glossy finish of rust-resistant stainless steel is a very distinctive feature.
Assembled, making installation and removal convenient.
Can be installed with few tools.


The picture shows a 70mm set.
All necessary items for installation are included.
All you need for installation are a pencil, drill (bit), Phillips screwdriver, and hammer.
*Although made of stainless steel, the base and screws under the cover are steel.
For installation in humid places, it is recommended to treat this area for rust prevention.


Can be used in various ways depending on your ideas.
Considering it can support up to 5kg, it can be used in many situations.
Utilization of dead space under stairs, backpacks with luggage inside, wet coats, vegetable baskets in the kitchen, wet towel hooks in the bathroom, bathrobes in the dressing room, personal item management at school and office, hooks for bags and accessories, heavy denim jeans.

Usage image: Suitable for stone or concrete walls, can be used in bathrooms, toilets, kitchens, living rooms, entrances, and all kinds of places.
*Installation in humid places like bathrooms requires some caution.
Although the top surface is stainless steel, the base and screws under the cover are steel.
For installation in humid places, it is recommended to treat this area for rust prevention.


Diagram of how to use anchor bolts for installation on hard walls, assembly/disassembly of poles, and installation after attaching the base to the wall.


Instructions for using anchor bolts necessary for mounting on hard walls.
Mark the position on the wall where you want to install with a pencil, above the screw hole of the base.
Drill a hole in the wall at the mark using a drill or bit.
Insert the anchor bolt into the wall with a hammer or similar tool.
Tighten the screw on the anchor over the base with a Phillips screwdriver.
Then attach the cover and tighten the pole from above.
The current anchor is white.


The pole mounting screw is right-hand thread.
Turns clockwise to tighten, counterclockwise to loosen.
The pole tightening bolt on top of the base is M8 size, right-hand thread.
Tighten clockwise, loosen counterclockwise.
This is a load-bearing part, so tighten firmly to the end.


Diagram of assembly after attaching the base to the wall.
Diagram of installation method without using anchor bolts.
No drilling or driving anchor bolts into the wall required.
All you need is a Phillips screwdriver (pencil and drill are optional). Mark the installation position with a pencil, then lightly drill a hole at the screw location.
Because the screw enters the wall or pillar straight, installation will be cleaner.


Caution and installation example

There may be burrs.
Burrs may be present at the location marked with a red circle in the image.
If concerned, remove burrs with a file or similar tool.
To prevent injury, it is recommended to wear work gloves during installation.


Effective use of dead space: the upper image shows the clever utilization of dead space under stairs.
The lower image shows an example of installation in a modern contemporary house.
Because of its simple design, it matches various locations.


Example of installation utilizing the rust-resistant stainless steel material: strong against rust, suitable for bathrooms and dressing rooms.
*Since the base part is steel, rust prevention treatment is recommended.

"Precautions": We are not responsible for accidents or damages resulting from the use of this product.
Please understand in advance.
Instruction manual and warranty are not included.
Please refrain from returning after installation modifications.
The load capacity of 5kg applies only when installed on sturdy wood or stone materials.
When installed on other materials, the load capacity will be less than 5kg.
Please note.

*Set of 6 stainless steel wall hooks resistant to rust.
Unlike seal-type hooks, fixed with three M4x20 longer screws.
Different load capacity from seal-type.
Can support up to 5kg.
With a washer, the part where the screw is fixed is hidden, so it does not spoil the appearance.

*Simple but timeless design.
*Suitable for use in living rooms, bedrooms, closets, kitchens, as well as humid areas like bathrooms, dressing rooms, washrooms, toilets, and even outdoors exposed to weather, thanks to rust-resistant stainless steel.
Can also be used in changing rooms, fitting rooms, companies, schools, club rooms, restaurants, izakayas, beauty salons, depending on your ideas.
When used with the hanger set, it is sturdy enough to hang coats and more.
The secret to the 5kg load capacity is not supporting with thick short screws, but rather dispersing the load across three points with thin, long screws.
Because the screws are thin, they are less likely to leave marks after removal.

*Using the included anchor bolts (eave plugs, wall plugs), it can be used on concrete walls, stone walls, and more, not just wooden walls.
*Installation is easy with minimal tools.
*Can be easily installed with a Phillips screwdriver, bit, drill, and a few tools.

*Set of 6, size (approx): length 54mm, diameter 16mm, weight 34g (per piece), material: stainless steel, screw: M4x20 (with compatible wall plug/anchor), load capacity 5kg.
*Please be careful of burrs on the base part to avoid injury.
*Anchor plug designs may vary slightly depending on the arrival time.
*Design and specifications may vary slightly depending on the batch or arrival time.
*Please understand in advance.
*Colors and images may differ slightly depending on display environment.
*Please understand.

Please note that due to differences in display environments, there may be slight variations in color and image appearance.