Ships within 3 business days ≪New Unopened Item≫ [New Unopened Item] Enables wireless operation of wired microphones. By connecting a wired microphone to the XLR type connector, wireless operation is possible. +48V Power Supply You can use dynamic microphones or condenser microphones that require DC48V power supply. High Sound Quality Achieved with Sony Digital Audio Processing Technology Sony's newly developed digital audio processing achieves high sound quality through digital companding using a DSP (Digital Signal Processor). Auto Gain Mode Requiring No Volume Adjustment This setting increases the gain and makes it less prone to distortion with a limiter. We recommend selecting this mode first when you don't know the speaker's volume. +15dB Gain Boost Mode for Increasing Volume When Used Off-Mic This mode boosts the gain by 15dB when the microphone is far from the mouth and the volume is insufficient. This is a convenient feature for interview applications. Line Input Compatible Input level can be set by switching between MIC/LINE according to the audio input device. Mute Function with Versatile Settings By operating the MUTE button during transmission, the sound is muted, and no audio is output from the receiver. Various patterns can be set for how operating the MUTE button results in muting. MUTE (ALT): Muting occurs when the MUTE button is pressed. Audio is output again when the MUTE button is pressed again. MUTE HOLD: Muting occurs while the MUTE button is pressed, and audio is output when the MUTE button is released. PTT HOLD: Audio is output while the MUTE button is pressed, and muting occurs when the MUTE button is released. DISABLE: Muting does not occur even when the MUTE button is operated. Ensures Compatibility with Sony WL-800/UWP/UWP-D Series Digital companding maintains compatibility with other Sony analog wireless systems. By switching modes, it can be used in combination with conventional Sony analog wireless microphone systems WL-800 series (WRT series, WRR series, WRU series), UWP series, and UWP-D series. Organic EL Display Easy to See Outdoors Adoption of a fast-responding Organic Light-Emitting Diode (OLED) display allows for clear, accurate, and real-time display of setting status. USB Terminal for External Power Supply The DC power supply function enables long-term operation and emergency power supply in case of battery depletion. Presence Sensor Mode Sets whether to reduce the impact on audio by the ultrasonic presence sensor. When enabled, a high-cut filter is activated to reduce noise. OFF: No filter LOW: Cutoff frequency 20 kHz HIGH: Cutoff frequency 15 kHz Ensures Compatibility with Previous Models via Infrared Communication Function The transmitter has an infrared function, allowing it to receive channel and compander mode settings from URX-P03 or URX-P03D. The receiver's AUTO SET function can also be used. Compact and Lightweight Design Ensures High Mobility The new UWP-D series has been made more compact and lightweight, enabling mobile operation in the field.
Compact and lightweight plug-on type transmitter