Code:4969363042248

Brand: Shimano (SHIMANO)

Model: 04224

Product color: Mixed color

Size information: 1 piece (x 1)

Product weight: 500

About this product
Gear ratio: 4.6 / Maximum winding length (cm/handle rotation): 83
Practical drag force / Maximum drag force (kg): 8.0 / 13.0
Weight (g): 420 / Spool dimensions (diameter / stroke) (mm): 57.5 / 19
Nylon line capacity (号-m): 4-240, 5-190, 6-160 / PE line capacity (号-m): 2-440, 3-300, 4-210
Handle length (mm): 65 / Number of bearings (BB / roller): 10 / 1
Department: Unisex adults
› See more brands Shimano (SHIMANO)
Hand orientation: Ambidextrous
Color: Mixed color
Material: Body: Aluminum / Rotor: Aluminum / Drive gear: Super duralumin
Fishing technique: Spinning
Product weight: 0.5 kilograms
Gear box ratio: 4.6
Features: Precision, durability, lightweight
Model name: 21 Twin Power SW 6000PG
Fishing line type: Nylon
About this product
Gear ratio: 4.6 / Maximum winding length (cm/handle rotation): 83
Practical drag force / Maximum drag force (kg): 8.0 / 13.0
Weight (g): 420 / Spool dimensions (diameter / stroke) (mm): 57.5 / 19
Nylon line capacity (号-m): 4-240, 5-190, 6-160 / PE line capacity (号-m): 2-440, 3-300, 4-210
Handle length (mm): 65 / Number of bearings (BB / roller): 10 / 1
Department: Unisex adults
› See more

Shipping size: Height 17.5, Width 15.5, Depth 12.1

Shipping weight: 690

Manufacturer's description
Twin Power SW "TWIN POWER SW"

The "strength shape" required for saltwater game reels is indeed diverse. It includes a rigid feel and toughness that withstand hard use, a strong waterproof performance that prevents seawater intrusion, and above all, the power to wind up. The Twin Power SW is equipped without hesitation with mechanisms inheriting the strength of Stella SW, such as Infinity Drive and Heat Sink Drag.

*Images are for illustration purposes; the color and shape may vary depending on the selected model number.

The image uses the 10000HG model.

Features









Infinity Drive

The conventional X-SHIP structure supported the pinion gear ends with bearings to achieve light winding. The current model features an evolved Infinity Drive structure. It non-contact supports the main shaft, which was previously supported by the pinion gear, with a special low-friction bushing, greatly reducing the sliding resistance of the main shaft. Additionally, the main shaft itself has undergone a special surface treatment, achieving further low friction. Rotation torque is reduced by about 30% compared to conventional models, evolving into a powerful reel capable of actively winding even under high load. Based on our comparative testing.


Heat Sink Drag

The conventional X-Tough Drag supported the spool from both directions with a structure that improved drag performance and durability. The current model is equipped with an evolved Heat Sink Drag that is more heat-resistant. It releases heat generated in the drag mechanism to outside the spool via a heat sink panel, improving drag force reduction due to heat by about 50%. Additionally, an insulating sheet that blocks heat flowing to the line winding part reduces the temperature rise of the winding section by about 30%. This evolution results in gentler and more stable drag performance depending on the line (models 10000PG, 10000HG, 14000PG, 14000XG). Based on our comparative testing.


X Protect for Line Roller

The previous model's stopper bearing part adopted the X Protect structure, significantly contributing to high waterproof performance. The Twin Power SW now features the X Protect structure not only on the stopper bearing part but also on the line roller part, further enhancing waterproof performance. Like the stopper bearing part, the line roller's water intrusion path is physically blocked by a seal component, allowing it to withstand high water pressure. The bearing inside the line roller is protected from harsh environments, with durability more than 10 times that of conventional products. Based on our comparative testing.


X Tough Drag

All washers are made of metal and carbon, supporting the spool from both top and bottom directions. Improved heat resistance and durability have enhanced "smooth and stable drag performance". (Except for 4000XG)









Rigid Support Drag

Supports the spool with two bearings inside the main shaft and spool, suppressing spool wobble and providing stable, smooth drag performance.


Silent Drive

The basic design of the entire body and the drive-related parts have been reviewed one by one, thoroughly eliminating fine play, gaps, and wobble between parts. Improvements target the drive gear, worm shaft, worm shaft pin, worm gear, and more. Achieves smooth rotation performance and quiet operation, providing a smooth winding feel.


X Ship

The large-diameter drive gear, the arrangement of the pinion and drive gears, and the two-point support by the pinion bearing keep the gear engagement strong and support a light, responsive reeling under load.


HAGANE Gear

Pressing a metal block with high pressure and finishing it with micron-level precision without machining. The proprietary cold forging technology produces a hard, tough gear, enabling smooth winding performance.









HAGANE Body

Using lightweight yet highly rigid metals such as aluminum and magnesium, it effectively suppresses reel flex, distortion, and twisting. Protects delicate gear engagement and enables smooth reeling.


X Rigid Rotor

Using aluminum alloy and verifying the thickness distribution through 3D analysis, it achieves even greater rigidity, durability, and excellent rotational balance. This high rigidity also contributes to improved functions of the drag and other parts.


X Protect for Stopper Bearing

Adopts a contact triple lip structure on the stopper bearing part. Filling with special grease reduces friction resistance, maintaining silky rotation performance while demonstrating high waterproof performance. The combined effect with X Shield achieves a waterproof standard equivalent to IPX8 for the body.


X Shield

Seals are applied at the body cover joint surface, spool drag knob contact parts, and other locations to block water ingress paths. Ensures high durability during saltwater game conditions.









CI4+ Handle Knob

For models from 4000 to 8000, uses a lightweight carbon material CI4+ handle knob with excellent rigidity and durability. It further reduces weight and is coated with a special coating to prevent slipping, enhancing winding smoothness. Provides a good user experience. (For 10000 and 14000 models, standard equipped with a lightweight hollow oval round handle knob.)