Perfect for surface treatment of curved parts
If you choose the wrong type of file and use a flat one to grind, it may cause scratches on the surface...
Sponge files fit perfectly to parts with moderate flexibility that is not too soft nor too hard, allowing for effective filing that utilizes curved surfaces.
Furthermore, with a solid thickness of 8mm, the force applied during filing spreads evenly, enabling uniform polishing of the entire surface.
Can be processed evenly on both flat and curved surfaces, regardless of the shape of the parts＊
Each side can be used independently, and when used together, start with the coarse green side (1000 grit) to shape, then finish with the white side (4000 grit) for a smooth, mirror-like finish.
(1) First, carefully cut off the gate with nippers or a design knife.
(2) Then, polish the remaining gate marks with the green side of the shiner to blend with the surface of the part.
If you want a matte finish, the work is complete at this point. (3) Further, using the white side for filing will produce a smooth, mirror-like surface, allowing gate marks to be neatly processed even without painting.
"Enhance the quality of assembled products" After shaping the gate marks, finishing with this file will easily and quickly produce a beautiful result.
Useful even when creating high-quality plastic models without painting.
＊For beginners unfamiliar with assembly＊For those who want to assemble efficiently without long working hours＊For those without a suitable environment for painting＊For use on clear parts where cut surfaces are easily noticeable. "Use your techniques to achieve higher quality." Recommended for advanced users aiming for a higher level of completion and who want to focus on tools.* For surface pitting treatment＊To remove marks from coarse files＊To prepare the surface before painting and improve adhesion＊To remove dust during painting or clear coating＊For polishing to eliminate decal steps or margins＊For shaping parts where glue has been used, such as seam filling.
This single tool can be used for nail polishing and shaping, creating a natural shine in a short time, giving a neat appearance.＊Its compact size makes it easy to carry around, and just a quick polish when needed is sufficient.
・"Plastic model finishing shiner 6-piece set" Sponge files that simplify gate processing in model making such as Gunpla, and improve the finish.
Popular among a wide range of users from beginners to advanced, recommended for those who want to finish without painting or want to neatly process gate marks on clear parts.
Also usable as a nail file for nail polishing.

・"Easy-to-use soft stick" Made of sponge with moderate flexibility, suitable for parts with curved surfaces.
Designed to be comfortably held in the hand, with a size and shape that makes processing easy.
The tip is tapered, making it convenient for grinding small parts.
・"Double-sided with two types of files" The roughness of the abrasive differs on each side, allowing for different surface textures.
Can be used independently as the green side (1000 grit) and the white side (4000 grit), and when used together, results in a more beautiful, glossy finish.

・"Easy gate processing" After shaping the gate marks, polishing with the green side of the shiner will produce a clean finish.
If a matte finish is desired, the work is complete at this stage.
Further, using the white side for filing will produce a smooth, mirror-like surface, allowing gate marks to be neatly processed even without painting.

・"For surface finishing" Ideal for removing pitting or marks left by coarse files, and for finishing polishing surfaces.
Not only improving the quality of unassembled parts, but also useful for preparing surfaces before painting and for polishing after clear coating (to remove steps), achieving higher quality finishes.

2025/01/20 18:49:44#36329ef263bfb081a5c8e3c0c9dfcf54fb80206a