Slippery sharpness that becomes addictive. Ultra-thin, single-edged nipper
A precision tool perfect for plastic model assembly such as Gunpla, with ultra-thin blades that cut smoothly and are less likely to cause whitening of the cut surface.
It easily slips into narrow gaps to beautifully cut the gates, making it easy to cut out small parts and remove burrs.
With an easy-to-grip handle suitable for long hours of work, it offers excellent usability＊
"Work smoothly and quickly."
Using dull nippers to forcefully cut increases the risk of the "whitening phenomenon," where the cut surface of the parts turns white.
Additionally, parts may become deformed, burrs may remain, creating gaps that affect the finish.
The quality of the gate finish depends on the nipper's sharpness, so using a high-performance nipper reduces stress when cutting parts, and sanding the gate marks can be done in a short time, improving work efficiency.
"Why does it cut cleanly? The key is the 'single-edged structure.'"
＊Since this product has a single-edged structure with only one side being a cutting edge, supporting the material with the "board blade" on the other side while cutting straight results in a flat and neatly aligned cut surface.
It also reduces plastic whitening and makes post-cut sanding easier, making it perfect not only for beginners but also for advanced users who want efficient work.
＊In contrast, a double-edged structure with blades on both sides increases cutting sharpness but may leave marks along the center of the cut, which is a concern.
If you are particular about the beauty of the cut surface, this is a must-check.
"Recommended for a wide range of modelers."
＊For those who want a clean finish with basic assembly
＊For those who want to efficiently produce many plastic models
＊Beginner users debuting with nippers
＊Intermediate and advanced users who care about the quality of the finish
＊Also good as a sub-nipper for experienced modelers.
"Cuts cleanly. Tips for use"
(1) When using the nipper, hold as close to the tip as possible, wrapping your entire palm around it. This is the key.
It increases stability and makes work easier.

(2) Turn the back of the blade toward the part, and insert the nipper from the "long side" of the gate rather than the short edge.
If you cut from a thick gate, the gate may break off due to the weight of the part, leading to whitening; therefore, cut from a thinner gate.

Cutting right up to the limit in one go puts stress on the part and can cause whitening, so always cut in 2-3 steps.
First, cut about 2-3mm away from the part, shortening the remaining gate.
Instead of cutting with force in one quick motion, cut slowly and gradually.

"Product contents" Nipper, dedicated storage case, blade tip cover
"Size" 117x47mm
・"Ultra-thin, single-edged nipper" A plastic cutting nipper with ultra-thin blades that cut smoothly and are less likely to cause whitening of the cut surface, with a single-edged structure.
While offering a professional level sharpness that satisfies intermediate and advanced users who care about the quality, it is also an easy-to-handle popular model accessible to beginners.

・"Recommended for plastic models." Perfect for detailed finishes in model production such as Gunpla.
With ultra-thin blades that easily slip into narrow gaps, it can beautifully cut gates, making it easy to cut out small parts and remove burrs.
It also reduces the effort needed for sanding after cutting, leading to increased work efficiency.

・"For those who care about the cut surface" A straight, single-edged type that ensures the cross-section of parts is flat and neatly aligned.
Unlike double-edged structures that tend to leave marks along the center from both sides, this design has only one side as the cutting edge, supporting the material with the "board blade" on the other side for a straight cut.

・"Plastic-only thin blade type" Can only cut plastic materials with a diameter of 4mm or less.
Because it is thinner and more delicate than general nippers, cutting or twisting thick runners or hard materials may cause blade breakage or chipping.
Keep the blade angle vertical and cut with light force.

・"Easy-to-grip handle" Fits comfortably in the hand, with a shape that allows a firm grip.
Cuts with light force and is suitable for long hours of work.
It also comes with a dedicated storage case and a plastic blade tip cover, allowing safe storage while protecting the nipper.
"Product contents" Nipper, dedicated storage case, blade tip cover "Size" 117x47mm
2025/07/11 19:26:49#20f2e7494b00a44a3661b14eebe069256952f0ea