"Slide and insert the convex and concave parts; it's hard to shake because it's a snap-fit." The concave piece is attached to the wall or furniture, and the convex piece is attached to the object such as a power strip with an adhesive sheet, and it is a male-female pair structure that slides in from top to bottom.
Unlike hook-type holders, the convex and concave parts engage and support each other, so the cord is less likely to sway sideways even if pulled, and to remove it, simply lift it upwards.
When cleaning or rearranging furniture, you can remove only the object, so you can attach and detach it repeatedly without re-sticking.
No tools are required.

"Independent type with one piece per sheet.
You can attach them at any interval according to the width of the object." This product (6x6cm) is an independent type with one piece per adhesive sheet.
Since the interval between attaching two pieces can be freely determined according to the width of the object, it can be used for everything from thin power strips to wide WiFi routers.
It can be used in either horizontal or vertical orientation, and can be installed not only on walls but also in hidden places such as the sides of desks or the back of shelves.
The adhesive sheet can be cut to adjust the size as needed.

"The clear resin with reduced thickness blends in with walls and furniture." The main body is transparently molded from PS+PVC resin, and acrylic adhesive is used for the adhesive surface.
Because it is clear, it does not stand out regardless of the color of the wall, wooden furniture, tiles, etc., and the reduced thickness means that the protrusion is not noticeable when attached.
It is lightweight at approximately 4.8g per piece, and puts less strain on the attached surface.
Suitable for flat, smooth surfaces such as tiles, glass, and metal-painted surfaces.

"Includes 20 sets (20 convex pieces + 20 concave pieces), for a total of 40 pieces.
Approximately 10 power strips." One set consists of one convex piece and one concave piece, for a total of 20 sets = 40 pieces.
Assuming 2 sets are used to secure one power strip, this is enough for approximately 10 power strips, and can be used throughout the house for living room outlets, routers under desks, and remotes on walls.
There are enough pieces to try out the placement, so you can rest assured even if you're unsure about the first location.
The same series also offers a 12x6cm/10 set option.

"Product Specifications" Material: Main body PS+PVC resin / Adhesive: Acrylic-based / Size: 12x6cm (2 pieces per sheet) / Set count: 10 sets (10 sheets with 2 convex pieces + 10 sheets with 2 concave pieces) / Weight: Approx. 20g (per set) / Color: Clear / Compatible surfaces: Flat, smooth surfaces (tiles, glass, marble, metal-painted surfaces, plastic boards, wood boards, etc.)
"Precautions" Cannot be used on wallpaper, painted walls, concrete, bricks, or uneven surfaces (may damage wallpaper when removed).
Wipe off dirt and oil from flat, smooth surfaces such as tiles, glass, and metal-painted surfaces, press firmly to attach while removing air, and hang objects after 12 hours or more.
For lightweight items only.
There may be differences in how the convex and concave parts fit due to molding burrs or individual differences.

2026/09/08 10:37:46#984bedeff518660d194f08d6b383e6beaed39882