Pot Tipping Stopper for Large Pots*Suitable for 9号 to 12号 pots (width 27cm to 36cm / height 27cm)*
【About the Pot Tipping Stopper】Have you ever experienced your flower or plant, which was beautifully blooming or growing, falling over and getting damaged due to typhoons or sudden wind and rain?
As plants and vegetables such as tomatoes, olives, roses, and morning glories grow, their balance with the pot becomes unstable, increasing the risk of falling over in the wind. In the case of ceramic flower pots, there is also a risk of the pot breaking.
Using the Pot Tipping Stopper increases the stability of the pot, preventing plants from being ruined or the pot from breaking. The stopper, made of durable AES resin, is firmly fixed to the pot with a magic band, ensuring effective prevention of tipping.
It is also convenient as you no longer need to move heavy flower pots indoors every time a typhoon occurs.
【Compatible with pots from 15cm to 36cm in diameter】The Pot Tipping Stopper is available in two sizes:- Small size (diameter 15–24cm)- Large size (diameter 27–36cm)
It is compatible with flower pots ranging from size 5 to 12 (diameter approximately 15cm to 36cm), which are commonly used in home gardens and on balconies. You can also replace the flower pots on which the Pot Tipping Stopper is installed.
【How to Install the Pot Tipping Stopper】1. Place four tipping stoppers on the bottom of the pot, evenly spaced at right angles (see Diagram 1).2. Thread the fixing band through the long hole at the bottom of each stopper in sequence, starting with one, then the next, and so on (see Diagram 2).3. Press one end of the fixing band firmly against the wall of the pot with your finger, then pull to tighten while overlapping the band to secure each stopper tightly against the pot wall. Cut off any excess band with scissors.4. Thread the remaining fixing band through the long hole at the top of each stopper and install in the same manner.5. Confirm that each stopper is securely and evenly attached at right angles around the pot. Once confirmed, the installation is complete (see Diagram 3).
【Precautions】The Pot Tipping Stopper prevents the pot from tipping over by firmly fixing it to the pot. Please check whether it can be attached to your home’s pots before purchasing.
*Please note that returns are not accepted after purchase due to inability to install or other reasons.*
*Even with the same pot size number from different manufacturers, sizes may vary slightly. For pots smaller than the specified size, the small size is recommended.*
*Cannot be used with a saucer attached.*
● How to Confirm Compatibility1. Download the actual size template for the Pot Tipping Stopper and print it on A4 paper.Download from the following link:https://file003.shop-pro.jp/PA01095/110/image/tentou-202207.pdf
2. Cut out the template with scissors.3. Hold the template against the pot you want to install on and check if it fits.
● Two points to check for compatibilityPoint 1:Can the part that inserts into the bottom of the pot be inserted more than half its length?
Point 2:Do the upper belt holes align perfectly with the pot without gaps?
Note that there may be about 1cm of error between the template and the actual product.For pots with a rim design, please ensure there is enough height to install comfortably.
【Specifications for Large Pots (9号 to 12号 pots)】Product Number: HTS-001BSet Contents: 4 tipping stoppers, 1 fixing band (300cm)Material: AES resin (main body), polyester (fixing band)Main Body Size: Width 3cm (max) × Length 25cm × Height 16cm*Size per piece*Compatible Size: 9号 to 12号 pots (width 27cm to 36cm / height 27cm)