The Pigeon "Mother's Milk" bottle is designed to pursue a "natural way of drinking" based on over 60 years of research.

Babies can drink using their natural mouth movements from birth, making it easy to use with breastfeeding at any time and allowing you to continue breastfeeding with peace of mind.

* Includes Mother's Milk nipple SS (round hole) for use from 0 months.
* Supports the three principles of feeding: "latching," "sucking and swallowing," and "gulping."
* "Latching" support: A soft texture that is close to the breast and does not hinder smooth tongue movement.
* "Sucking and swallowing" support: A snug curve that fits the mouth, with a latch-on guide.
* "Gulping" support: A nipple hole shape designed for growth and development.
* No. 1 in use at maternity hospitals and clinics (※ surveyed by Pigeon).
* The plastic is high-quality plastic used in medical settings. It is also made with safe, BPA-free materials.

■ How to Use
Capacity: 160ml (maximum scale capacity)
Nipple hole shape: Round hole (SS size)

[Sterilization Methods]
Boiling: ○
Microwave: ○
Chemical solution: ○

■ Ingredients
Hood and cap: Polypropylene
Nipple: Synthetic rubber (silicone rubber)
Bottle: Polyphenylene sulfone (PPSU)

■ Precautions for Use
Please keep the instruction manual in a safe place.
* After use, thoroughly clean the nipple and bottle using a dedicated brush, then sterilize them.
* Do not place near fire. It may deform.
* Use a sponge brush for cleaning. Using a hard brush will cause scratches.

Caution: Burns
To prevent burns, please be aware of the following:
* The nursing bottle will become hot during formula preparation.
* Do not prepare formula in front of your baby.
* Always check the temperature of the milk or drink before feeding.
* The nursing bottle will also be hot after boiling or microwave sterilization.
* When preparing formula, shaking the bottle vertically can cause the contents to spurt out, posing a burn risk. Also, if you shake with the hood attached, the high temperature of the water can increase the internal pressure of the bottle, leading to leakage or spurting, which is dangerous.
* When holding the bottle by the hood attached to the cap, the hood may come off. Hold the bottle by the upper part to support it.

Notes on Nipple Assembly
(1) Hold the base of the nipple by squeezing it firmly.
(2) Insert one side of the nipple base smoothly under the cap from above.
(3) Use both thumbs to fit the entire base inside the cap.

The nipple for this nursing bottle can only be used with the following products:
* Pigeon Mother's Milk Bottle
* Pigeon Mother's Milk Consultation Bottle
* Pigeon Mag Mag Colon Spout

※ The cap and hood for this nursing bottle cannot be used with the Pigeon Mag Mag Colon Spout.
※ Slim type nipples cannot be used with this nursing bottle.

About Cleaning and Sterilization Methods
* Always clean and sterilize before first use.
* After use, immediately soak in lukewarm water and wash with "Pigeon Bottle Cleaner" or similar. Thoroughly clean the nipple and bottle using a dedicated brush, then sterilize.
* After cleaning, rinse thoroughly with clean water.
* Gently rub the air vent valve, air vent, and nipple hole with both hands. Washing or pulling strongly can tear the valve and cause leakage.
* A safe white powdery food additive is applied to protect the air vent valve. Also, due to the nature of the material, some components may seep out. Although safe, please wash before use.
* The tip of the nipple is very delicate. When washing with a cleaning brush, hold the tip of the nipple with the pad of your finger.

[Boiling Sterilization] Boil in plenty of water in a large pot for 3-5 minutes after it comes to a boil.
[Chemical Solution Sterilization] Refer to the instructions for the sterilizing solution.
[Microwave Sterilization] Refer to the instructions for the microwave sterilizer.

When to Replace
* Once a baby gets used to a particular nipple, they may resist a new one. Use two or more nipples alternately for approximately 2 months. Replace them early if they become worn, regardless of usage, to prevent tearing or damage.
* Be aware that nipples can tear if a baby with emerging teeth bites and pulls on them.

[Country of Origin]
Thailand

[Contact Information]
Company Name: Pigeon Corporation, Customer Service Center
Phone: 0120-741-887
Hours: 9:00 AM - 5:00 PM (excluding Saturdays, Sundays, and holidays)

[Manufacturer and Distributor]
Company Name: Pigeon Corporation
Address: 4-5 Nihonbashi Hisamatsu-cho, Chuo-ku, Tokyo 103-8480

[Product Category]
"Daily Goods"

※ Package design and other specifications are subject to change without notice. Please understand this in advance.