Mother’s Milk Feel is a baby bottle designed with over 60 years of research to pursue a "natural drinking experience."

Because babies can drink using their natural mouth movements from birth, it is easy to use alongside breastfeeding at any time, allowing mothers to continue breastfeeding with confidence.

- Comes with the Mother’s Milk Feel nipple SS (round hole) from 0 months old.
- Supports the three principles of suckling: "attachment," "sucking," and "swallowing."

Support for "attachment": A soft, textured feel that brings the bottle closer to the breast and does not hinder smooth tongue movement.

Support for "sucking": A perfectly curved shape that fits snugly in the mouth, with an appropriate latch-on guide.

Support for "swallowing": A nipple hole shape designed according to "growth and development."

- No. 1 usage record in hospitals and maternity clinics (※Pigeon research).
- Made of heat-resistant glass. The glass used is strong against temperature changes, suitable for chemical laboratory use.

■ Usage Instructions

Disinfection Methods:
- Boiling: Yes
- Microwave: Yes
- Chemical solution: Yes

Bottle Capacity:
- 160 ml (maximum graduation)

Intended Use:
- For hot water

Heat Resistance Temperature Difference:
- 120°C

Nipple Hole Shape:
- Round hole (SS size)

■ Materials

Food and Cap: Polypropylene
Nipple: Synthetic rubber (silicone rubber)
Bottle: Borosilicate glass

■ Precautions for Use

Please keep the instruction manual in a safe place.

**Warning: Breakage**
Glass baby bottles are fragile. They can cause injury if broken.

- Fragments may fly off when broken, causing serious cuts.
- Dropping or impact can cause breakage. Handle with care.
- Always boil water to over 70°C for formula preparation and use hot water immediately after boiling. During winter, bottles may be cold; pouring boiling water suddenly can cause breakage or burns.
- Rapid cooling with ice water may cause breakage.
- Cool slowly with running water or in a bowl of water.
- Check for cracks or scratches (especially on screw parts, small chips, or cracks) before each use. If any damage is found, replace with a new one to prevent breakage or injury.
- Never let children hold the bottle alone. Dropping or falling can cause breakage and danger.
- When shaking the bottle vigorously with the cap on, internal pressure may increase and cause breakage.
- Hold the top of the bottle when handling to prevent the cap from coming off.

**Caution: Burns**
To prevent burns, please note the following:

- Bottles become hot during formula preparation.
- Do not prepare formula near children.
- Always check the temperature of milk or drinks before feeding.
- Bottles are hot after boiling or microwave disinfection.
- Shaking the bottle vertically during formula preparation can cause contents to spill and cause burns. Also, setting the cap and shaking can increase internal pressure with hot water, risking leaks or splashes.

**Warning: Breakage**
Glass bottles will break if dropped or impacted.

- Do not give to children to hold. Be cautious of cracks, chips, especially on screw parts.
- Do not prepare formula with the cap on.

**Nipple Assembly Instructions**

1. Squeeze the nipple base firmly to hold it.
2. Gently insert one side of the nipple base into the cap from above.
3. Use both thumbs to fit the entire base into the inside of the cap.

This nipple is only compatible with the following products:
- Pigeon Mother’s Milk Feel Baby Bottle
- Pigeon Breastfeeding Consultation Baby Bottle
- Pigeon MagMag Coloon Spout

※ The cap and food cover of this baby bottle cannot be used with the Pigeon MagMag Coloon Spout.
※ Slim-type nipples are not compatible with this baby bottle.

**Cleaning and Disinfection Methods**

- Always wash and disinfect before first use.
- After use, immediately soak in lukewarm water and wash with a dedicated bottle brush or similar. After thorough cleaning, disinfect.
- Rinse thoroughly with clean water.
- Gently wash the vent valve, vent hole, and nipple hole with both hands. Do not scrub or pull strongly, as this may tear the valve and cause leaks.
- To protect the vent valve, a safe white powder food additive is applied. Some components may leach out due to material properties. Wash before first use.
- The nipple tip is very delicate. When washing with a brush, press the tip with your finger to avoid damage.

Disinfection options:
- **Boiling:** Fill a large pot with water and boil for 3-5 minutes.
- **Chemical disinfectant:** Follow the instructions of the disinfectant.
- **Microwave:** Follow the microwave disinfectant instructions.

**Replacement Guidelines**

- Once a baby becomes accustomed to a particular nipple, they may refuse a new one. Alternate between two or more nipples over approximately two months.
- Replace old nipples early, regardless of usage, if they become torn or cut.
- Be careful that babies with teeth may tear the nipple by biting and pulling.

**Country of Origin:**
Japan

**Contact Information:**
Company: Pigeon Corporation Customer Service
Phone: 0120-741-887
Hours: 9:00–17:00 (excluding weekends and holidays)

**Manufacturer:**
Pigeon Corporation
Address: 4-5 Honmatsu-cho, Nihombashi, Chuo-ku, Tokyo 103-8480

**Product Category:**
"Daily necessities"

*Note: Packaging design and other details are subject to change without notice.*