This is a dedicated case that allows simultaneous sterilization and disinfection of multiple baby bottles, while also enabling compact storage and drying.
It is a space-saving type that can be stored compactly when not in use.
It comes with a convenient drainage stand for drying.
In addition to baby bottles, it can be used for nipples, breast pumps, nipple protectors, nipple aspirators, MagMag Colon, pacifiers, and more.
■ Simultaneously sterilize and disinfect two Breast Milk Feel baby bottles!
Compatible with the Breast Milk Feel baby bottles renewed in February 2022, it can sterilize and disinfect up to two 240ml bottles at the same time.
Designed specifically for the Breast Milk Feel baby bottles, made possible by Pigeon. It allows sterilization with minimal disinfectant solution, without wasting space.
■ Despite its compact size, it can store three Breast Milk Feel baby bottles
It can hold three 240ml Breast Milk Feel bottles and the disassembled drainage stand inside the case.
■ Comes with a drainage stand for easy drying
Includes a drainage stand that makes it easy to dry bottles and nipples.
It is easy to assemble, and when not in use, it can be stored compactly, saving space.
■ The lid has a measuring scale on the inside
The lid features a measuring section, allowing you to accurately and easily prepare disinfectant solution.
The case also has water level lines, so you can see the amount of water.
■ Simple color and shape blend into your room
Suitable for use with liquid-type disinfectants and sterilizing solutions, as well as granular-type baby bottle sterilizing agents like Milk Pomp S.
■ Usage Instructions
【Method for disinfecting (sterilizing) baby bottles and nipples】
1. Prepare the solution
- For Pigeon baby bottle disinfectant/sterilizing solution (liquid type: 31.25ml): measure using the scale on the lid (inner horizontal line at 31.25ml) and pour one full dose into the case.
- For Pigeon baby bottle sterilizing powder (granular type: 1 packet): put one packet into the case.
- Fill with tap water up to the water level line inside the case.
2. Wash the baby bottles immediately after use with a baby bottle detergent.
3. Soak for at least 1 hour (placing heavier items like bottles on top of lighter parts such as floating components makes them less likely to float). Ensure they are fully submerged. *The drainage stand cannot be soaked simultaneously.
4. Remove just before use. *If you are concerned about odor, rinsing is OK.
(Use sterilizing scissors (sold separately) or similar tools to remove bottles carefully, avoiding drops. Transfer to your hand and pour out the solution. No rinsing necessary.)
【Drying method】
It is possible to hang two bottles or nipples on the stand simultaneously for drying. *Please wash and disinfect the stand before use.
1. Clean and disinfect the stand (place the support part facing down).
*Ensure the parts where items are hung are submerged. The stand's mounting area will be slightly above the solution. *Cannot soak bottles and stand at the same time.
2. Assemble the stand (compatible with MagMag Colon, durable for long-term use).
3. Hang items on the stand (straw parts of MagMag can also be hung by passing through the holes).
*Since water droplets may fall, please place a towel or similar underneath the stand.
*Be aware that solution may discolor or fade towels or cloths placed underneath.
*Do not move (carry) the stand with bottles or nipples hanging on it, as this is dangerous.
*When removing bottles or nipples from the stand, do so with clean hands.
*After washing, thoroughly drain water before storing or keeping the bottles.
*Store out of reach of children.
*Use on a flat surface.
*Cannot be used for drying with products other than ours.
*The stand may deform slightly due to environmental factors.
*Discontinue use immediately if cracks, chips, or damage occur.
*Do not use in dusty environments.
*Do not put in the freezer.
*Do not sterilize in a microwave.
*Do not boil sterilize.
*Do not pour boiling water into the case.
*Do not use in a dishwasher.
*Scrubbing with a brush or abrasive cleaner may cause scratches.
■ Country of origin
Thailand
■ Contact information
Company: Pigeon Co., Ltd. Customer Service Center
Phone: 0120-741-887
Hours: 9:00 to 17:00 (excluding weekends and holidays)
■ Manufacturer and distributor
Company: Pigeon Co., Ltd.
Address: 4-4 Nihonbashi Hisamatsucho, Chuo-ku, Tokyo 103-8480
■ Product category
"Daily necessities"
*Please note that packaging design and other details are subject to change without notice.