Code:4902704048240

Brand:Panasonic

Model:NQ28751WK

About this product
Material, Color: Plate: White
Dimensions: Width: 208 mm, Height: 120 mm, Depth: 15 mm
Input Power: AC100V (50/60Hz common), Number of Circuits: 5 circuits, Load Capacity: Incandescent lamp max 200W (2A) (fluorescent lamp, LED refer to separate table) / circuit, however, 5 circuits total max 400W (4A) (for insulated construction), Booster 1 circuit type (NQL10051) can be used, Can be used on walls with mat-laid construction (thermal resistance value 2.5 K/W or less) insulated construction.
Specifications: Dimming - ON/OFF switching switch, Number of Memory Scenes: 4 scenes, Number of Operation Scenes: 4 scenes + ON/OFF, Fade Time: 2.5 seconds per scene, with remote control signal receiver, high airtightness compatible, Mounting: Compatible with JIS 4-gang metal switch box (with cover), Compatible Loads: LED, fluorescent lamp, incandescent lamp
› See more Operating Mode ON-OFF
Current Rating: 2 Amps, 4 Amps
Brand: Panasonic
Actuator Type: Push Button
Unit Count: 1.0 Count About this product
Material, Color: Plate: White
Dimensions: Width: 208 mm, Height: 120 mm, Depth: 15 mm
Input Power: AC100V (50/60Hz common), Number of Circuits: 5 circuits, Load Capacity: Incandescent lamp max 200W (2A) (fluorescent lamp, LED refer to separate table) / circuit, however, 5 circuits total max 400W (4A) (for insulated construction), Booster 1 circuit type (NQL10051) can be used, Can be used on walls with mat-laid construction (thermal resistance value 2.5 K/W or less) insulated construction.
Specifications: Dimming - ON/OFF switching switch, Number of Memory Scenes: 4 scenes, Number of Operation Scenes: 4 scenes + ON/OFF, Fade Time: 2.5 seconds per scene, with remote control signal receiver, high airtightness compatible, Mounting: Compatible with JIS 4-gang metal switch box (with cover), Compatible Loads: LED, fluorescent lamp, incandescent lamp
› See more

Shipping Size: Height 9.2, Width 16.7, Depth 25.5

Shipping Weight: 980

Please use within the maximum load capacity.
Do not connect devices other than lighting fixtures (ceiling fans, electromagnetic contactors, etc.).
Do not connect lighting fixtures with remote control or sensor functions.
Cannot connect slave units.
For fixtures with "LC" startup method, connect one dimming interface unit per circuit.
Flickering may occur at the dimming lower limit. If this happens, please use at a slightly brighter setting.
If the power supply voltage fluctuates due to the influence of other equipment (such as high-capacity loads other than lighting on the same phase power supply), the brightness may slightly change during dimming illumination, but this is not an abnormality.
When dimming multiple lights simultaneously, please note that there may be variations in the brightness when turned off.
Compatible remote control: HK9394.