Code: 4549980724897

Brand: Panasonic (Panasonic)

Model: EZ1D11S-R

Product color: Red

Product size: Height 4.2, Width 4.2, Depth 13.1

Product weight: 280

About this product
Specifications: Main body size: total length 131, total height 42, total width 42 / weight: 170g / Basic functions: forward and reverse rotation, manual tightening function, with brake, LED light / Battery (built-in): lithium-ion battery 3.7V, 850mAh / Charging time: approximately 55 minutes (in our EZ37C4 EZ37C5 EZ37C6), approximately 60 minutes (with commercial USB charger 5V 1A), approximately 45 minutes (with commercial USB charger 5V 2A) / Chuck: one-touch bit lock system (step dimensions 9, 11.5, 13) / Compatible bits: hex bits, across flats 6.35 / Tightening torque: electric operation 0.4N·m (maximum tightening torque of rigid body), manual operation 8.0N·m (maximum durability torque) / Rotation speed (per minute): 850 rpm / Accessories: mini driver bit set (black oxide finish), USB charging cable (50cm length, USB Type-A to USB Type-C, a commercially available USB AC adapter is required for charging) / Color: Red
Features: A high-speed, precision-finish rechargeable mini driver. Compared to conventional models, it achieves about 3.5 times the rotation speed of 850 rpm. It allows high-speed and precise work even in dark or confined spaces. Suitable for installing wiring devices, tightening screws on terminal blocks of distribution boards, maintenance of precision equipment, furniture screw driving, manual tightening (when pre-drilled holes or screw cutting are present), and more. The high rotation speed enables faster screw driving, reducing work time to about one-third of conventional models (for tightening a small M3 5mm screw). Additionally, equipped with a low-torque brake function for more precise work. Adopts a high-brightness LED light, approximately 2.5 times brighter than conventional models, improving work efficiency. The push switch allows easy adjustment of ON/OFF, and by half-pressing it, only the LED light can be turned on, making it usable as a simple light. Also features automatic stop when charging level is adequate and automatic stop under excessive load to protect the motor and battery.
› See more Brand: Panasonic (Panasonic)
Powered by battery
Maximum rotation speed: 850 rpm
Voltage: 3.7 volts
Color: Red
Included components: mini driver bit set (black oxide finish), USB charging cable
Features: LED light, rechargeable, forward rotation
Product dimensions: 13.1 cm length x 4.2 cm width x 4.2 cm height
Product weight: 0.28 kilograms
Battery capacity: 850 mAh
About this product
Specifications: Main body size: total length 131, total height 42, total width 42 / weight: 170g / Basic functions: forward and reverse rotation, manual tightening function, with brake, LED light / Battery (built-in): lithium-ion battery 3.7V, 850mAh / Charging time: approximately 55 minutes (in our EZ37C4 EZ37C5 EZ37C6), approximately 60 minutes (with commercial USB charger 5V 1A), approximately 45 minutes (with commercial USB charger 5V 2A) / Chuck: one-touch bit lock system (step dimensions 9, 11.5, 13) / Compatible bits: hex bits, across flats 6.35 / Tightening torque: electric operation 0.4N·m (maximum tightening torque of rigid body), manual operation 8.0N·m (maximum durability torque) / Rotation speed (per minute): 850 rpm / Accessories: mini driver bit set (black oxide finish), USB charging cable (50cm length, USB Type-A to USB Type-C, a commercially available USB AC adapter is required for charging) / Color: Red
Features: A high-speed, precision-finish rechargeable mini driver. Compared to conventional models, it achieves about 3.5 times the rotation speed of 850 rpm. It allows high-speed and precise work even in dark or confined spaces. Suitable for installing wiring devices, tightening screws on terminal blocks of distribution boards, maintenance of precision equipment, furniture screw driving, manual tightening (when pre-drilled holes or screw cutting are present), and more. The high rotation speed enables faster screw driving, reducing work time to about one-third of conventional models (for tightening a small M3 5mm screw). Additionally, equipped with a low-torque brake function for more precise work. Adopts a high-brightness LED light, approximately 2.5 times brighter than conventional models, improving work efficiency. The push switch allows easy adjustment of ON/OFF, and by half-pressing it, only the LED light can be turned on, making it usable as a simple light. Also features automatic stop when charging level is adequate and automatic stop under excessive load to protect the motor and battery.
› See more

Shipping size: Height 19.5, Width 13.8, Depth 5.9

Shipping weight: 280

A rechargeable mini driver capable of high-speed, precise finishing.
Solves problems such as 'manual screwdrivers are difficult when many screws need to be tightened' and 'electric drivers are too heavy and have too much torque for small screws.'
Suitable for installing wiring devices, tightening screws on distribution board terminals, maintenance of precision equipment, furniture screw driving, manual tightening (when pre-drilled holes or screw cutting are present), and various other component screw tightening tasks.
Work time is about one-third of conventional models (for tightening a small M3 5mm screw), enabling faster screw driving.
Equipped with a low-torque brake function for more precise work.
Uses a high-brightness LED, about 2.5 times brighter than conventional models, making work in dark places easier.
Half-pressing the push switch turns on only the LED, allowing it to be used as a simple light, making it easier to target screws in dark places.
Features a push switch that is easy to adjust ON/OFF, enabling fine work.
Adopts a shape within the holster that makes it difficult for the switch to turn on accidentally, reducing misoperation.
Adopts a USB Type-C charging port (USB AC adapter not included, please use the included charging cable for charging), allowing charging anywhere.
Automatically stops charging when the charge level is adequate, preventing overcharging, a weakness of lithium-ion batteries.
Automatically stops under excessive load to protect the motor and battery, making the tool more durable.
Since it charges via USB, it can also be charged from Panasonic's LED multi-light EZ37C4 or wireless speaker EZ37C5, convenient when no outlet is available. Manufacturer's description.
EZ1D11 Rechargeable Mini Driver

High-speed, precise finishing. Equipped with 850 rpm high rotation and brake function. High-brightness LED.

Small, lightweight, easy to use.

Installation of wiring devices.

Tightening screws on distribution board terminals.

Maintenance of precision equipment.

Furniture screw driving, manual tightening.

When pre-drilled holes or screw cutting are present.

Solves screw tightening problems.
Comparison with conventional models.

High-speed rotation for fast screw driving, work time about one-third of conventional models.

Achieves faster screw driving with 850 rpm high rotation. Recommended for tasks with many small screws inside panels.

For tightening a single M3 5mm small screw.

Equipped with a low-torque brake function for more precise work.

Fast speed and excessive torque can cause 'damage to the board,' 'material splitting,' or 'strain on the wrist.'

Uses high-brightness LED, about 2.5 times brighter than conventional models.

Easier work in dark places.

Can be finely adjusted with a push switch, ideal for precision work.

Features a push switch that is easy to adjust ON/OFF, enabling fine work.

Adopts a USB Type-C charging port.

Please use the included charging cable for charging.

USB Type-C is a registered trademark of the Implementers Forum.

USB AC adapter not included.


EZ6220

EZ6470

EZ1D11

EZ7412


Add to cart

Add to cart

Add to cart

Add to cart

Customer reviews
4.4 out of 5 stars
787

4.1 out of 5 stars
113

3.9 out of 5 stars
403

4.1 out of 5 stars
1,284

Price
8,545
8,545
11,980
11,980
6,273
6,273
6,473
6,473
Type: Rechargeable drill driver, rechargeable drill driver, rechargeable mini driver, rechargeable mini driver
Battery: 2.4V, 12V, 3.7V, 3.7V
Motor: -
no data
-
no data
-
no data
-
no data

Work range (small screws): M2.5 to 5 / (wood screws): φ2.1 to 3.5 / (metal hole saw): φ19 / (wood screws): φ2.1 to 6.8 / (woodworking): φ3 to 30 / (small screws): M3 to M5. (electric operation) M3 for small screws, M6 for manual tightening.