＊Regarding the provision
We start selling large-sized wrapping sheets, and receive over 20,000 orders annually.
When preparing large-sized sheets for parts such as the bonnet or roof, which are large in size, manufacturer products tend to be expensive.
To allow customers to easily enjoy wrapping sheets, we can offer them at low cost by sourcing directly from the factory to reduce costs.

Lenticular visual effect... The 4D pattern changes depending on the viewing angle, similar to lenticular.
The lenticular surface has a special coating, and because the images seen with the right eye and the left eye are different, the brain perceives it as three-dimensional.
This 4D pattern is not exactly the same mechanism, but similar to lenticular, when viewed from the front, it has a very three-dimensional depth feeling and an elusive visual effect.
Elasticity... When heated with a hairdryer or heat gun and pulled, it stretches, so it can be applied smoothly even on uneven or curved surfaces.
Stretching the sheet too much will also stretch the pattern, so it is necessary to apply while stretching it moderately.



＊Examples of 4D application on exterior and interior surfaces


On the car's bonnet
A close-up image of the sheet applied to a Genesis bonnet.
When applying to a sedan-type bonnet, about 152x200cm is sufficient, but since the size of the front nose varies by vehicle, actual measurements before application are necessary.
The Mercedes-Benz S-Class bonnet is approximately 144x170cm.



On a scooter cowl
It can be applied without issue to not only metal parts like the car's bonnet but also plastic parts.
If there are no gaps (i.e., fine bumps or unevenness) on the surface to be applied, the wrapping sheet will adhere firmly and be less likely to peel off.
＊Exhaust pipes reach very high temperatures (about 200–300°C), so application is not possible.



On the car interior
Not only exterior but also interior of the vehicle can be wrapped.
Of course, small items like laptops and mobile phones can also be customized with wrapping sheets.



Wrapping sheet specifications
Material: Polymeric PVC Manufacturing method: Calendar process Thickness: 150 microns *Thickness of patterned sheet (excluding release paper) Adhesiveness: Fixes after 1–2 hours, maximum adhesion after 24 hours Application temperature: 16–32°C Recommended application temperature: 16–25°C
＊The thickness of the patterned sheet (excluding the release paper) is 150 microns.
・Material: High-quality high-polymer PVC Sheet type: 4D

・Material: High-quality high-polymer PVC Sheet type: 4D
If creases form, applying while heating with a heat gun or hairdryer allows smooth application on curved surfaces.
Even if creases form, applying while heating with a heat gun or hairdryer allows smooth application on curved surfaces.
・"Precautions for use" The shape of the air flow may differ from the photos shown depending on the product.

Due to the product's characteristics, peeling, hardening, or discoloration may occur over time.
Also, after application, deterioration over time may make peeling more difficult.
In such cases, adhesive residue or peeling during repainting may occur.
In such cases, adhesive residue or peeling during repainting may occur.
2025/12/01 17:50:09#c4134b4fa66c909c57cfcae8bf78156e726379d8

Durability varies significantly depending on the usage environment and vehicle condition, and we do not provide any guarantees for these symptoms.