"Precautions"
1. Depending on the vehicle model and motorcycle specifications, it may not be usable. Please check the dimensions and load capacity before purchasing.

2. When in use, please avoid prolonged loading.

3. During manufacturing, iron powder may enter the pipes, but this does not affect usability.
Please remove it before use during assembly.


"Set Contents"
Front stand x1; Rear stand x1; L-shaped holder x2; V-shaped holder x2; Other fastening parts.


"Size"
Front swingarm width (approx. 220mm-380mm)
Rear swingarm width (approx. 170mm-270mm)
"Load Capacity"
Excellent load capacity (385kg/850LBS).
It can maintain the rear wheel without deformation when lifting for maintenance of off-road motorcycles, trial motorcycles, motard motorcycles, and many other vehicle models.


"Convenient to Use"
Easy to assemble, the front swingarm width (approx. 220mm-380mm) / rear swingarm width (approx. 170mm-270mm) can be adjusted to meet the user's needs.
With casters, you can easily lift the motorcycle.


"Protection Design"
The holding surface of the motorcycle stand has a protective design, leaving a gap between the handle and the ground to prevent your hands from being scraped by falling too far.

2025/02/28 19:20:47#78c9d81414b01793f28f1916c360506265f295e5