This product is a license plate upper right-mounted rear camera stay developed exclusively for Mitsuba Sanko EDR-11/21/21G and Kijima 1080J/AD720.
It is mounted using the license plate fixing bolts and achieves an optimal installation position through left-right adjustment functions.
Main features "Dedicated design and adjustment functions"
It is shaped to match the target drive recorder and securely fixed to the upper right of the license plate.
The elongated hole design allows approximately 25mm of left-right adjustment of the camera position, enabling installation at an ideal angle while avoiding interference with the vehicle body and surrounding parts.
"Compatible with a wide range of vehicle types"
Supports various license plate sizes from scooters to large motorcycles.
It can be installed immediately using the included rust-resistant bolts and nuts.
"Durability and environmental resistance"
The steel body is finished with a matte black coating, and the included fittings are also rust-proofed.
It is resistant to rust even in bad weather and humid environments, making it suitable for long-term use.
Installation method: Confirm that your license plate has an appropriate angle (20° to 40°) for this product, and check that other parts (such as license plate lights) do not interfere with the camera installation space.
Remove the license plate once, then insert this product between the license plate and the vehicle body.
Secure it with the included rust-proof bolts, washers, and nylon nuts, adjust the camera position left and right, then tighten firmly to complete.

Important precautions
This product is compatible with vehicles with a license plate mounting angle of 20° to 40°.
If the angle is outside this range, there may be cases where the camera angle cannot be adjusted, so please be careful.
Also, please confirm in advance that there is enough space above the license plate to install the camera.
Installation is not possible if there is interference from license plate lights, turn signals, tail lamps, etc.
After installation, regularly check for looseness and ensure the fixed state is always secure.

"Dedicated design & adjustable left-right" Compatible with Mitsuba Sanko EDR-11/21/21G and Kijima 1080J/AD720.
The elongated hole design at the license plate mounting part allows approximately 25mm of left-right adjustment of the camera position, avoiding interference with the vehicle body and surrounding parts.

"Supports a wide range of vehicle types" Compatible with license plates of scooters (up to 125cc), light motorcycles (126–250cc), and small motorcycles (251cc and above).
Fixed with a dedicated bracket, designed to resist shifting even during driving vibrations.

"High durability steel + rust-proof treatment" The steel body is finished with a matte coating, and the included bolts and nuts are also rust-proofed.
Resistant to rust even in rainy and high-humidity environments, suitable for long-term use.

"Pre-confirmation of angle compatibility" Compatible with vehicles with a license plate mounting angle of 20° to 40°.
If the angle is outside this range, there may be cases where the camera's field of view cannot be adjusted, so pre-confirmation is recommended.

"Check space before installation" Sufficient space is required above the license plate to install the camera.
Installation may not be possible if there is interference with license plate lights, turn signals, tail lamps, etc.

2026/05/31 19:07:38#66b969ad66d4470fbd638c987ea672345a2cdd0e