Product Introduction

【MEN'S MAX FEEL Hard SPARK CLOSE Product Description】
The distinctive shape and feel-shape design provide a natural and stable grip.

【Country of Origin】 Japan

【Main Body Size】 Height: 138mm, Width: 52mm, Depth: 52mm

【Specifications】 Non-through type

【Content Weight】 154g

- Explosive high elasticity. Born with a hard feel.
- Sharp stimulation, bursting texture.
- Clearer stimulation.
- Powerful rebound force.
- The rebound force of the hard material creates a bouncy sensation.
- The vibrations transmitted to the hand with each stroke are impressive.

【Plus Wetch: No Lotion Needed Material】
A patented technology that makes the surface sticky and wet just by pouring water. No lotion required.
It can be used immediately with water from your home, and after use, it can be washed and dried for multiple uses.

【The Secret of Plus Wetch Moisture】
When moisture adheres, moisturizing components react, enveloping the resin body in moisture.

【Plus Wetch Material: Clearly Transmits Bumps and Grooves!】
Lotion tends to seep into the gaps of uneven surfaces, dulling the tactile sensation.
Plus Wetch's material itself becomes slippery, allowing you to clearly feel the internal structure.

【MEN'S MAX FEEL Hard SPARK CLOSE Internal Structure】
Features a structure with large balls, bumps, and folds.
Each stroke causes the internal structure to shake and bounce, stimulating as if bouncing.

【Men's Max Feel Usage Method】
1. Prepare only water. Lightly wet the interior with water.
Be careful not to overfill.
2. Knead to moisten and let the moisture seep out.
When the internal moisturizing jelly appears, the preparation is complete.
3. Can be used multiple times after cleaning!
When cleaning, wash appropriately, then wipe off moisture with a dry cloth.
Re-wet with water to use again multiple times.
*If you feel the slipperiness is weak, please use the included pocket lotion.*

---

Product Description for MEN'S MAX 360UV Warming Probe

【99.9% Sterilization】
Equipped with six UVC ultraviolet lamps at a wavelength of 275nm, which is most effective for sterilization.
Simply connect to a USB power source to achieve 99.9% sterilization.
It thoroughly sterilizes concerning viruses and bacteria, keeping your favorite hall interior 360 degrees clean.

【Usage Steps】
1. Remove the main body cap.
2. Set the warmer into the hall.
3. Connect the USB power to start heating and sterilization.

【Long Size】
The main body length is 20cm, suitable for large halls.

【Liquid-Resistant Waterproof Design】
Made of ABS and glass, ensuring a reliable waterproof design for everyday use.
It can be washed thoroughly for cleanliness.
*Note: The USB part is not waterproof.*

【Product Size】
Total length: 200mm, Diameter: 20mm (units: mm)
【Content Weight】 71g

【Warming Function】
Heats up to approximately 55°C in about 5 minutes.

【Precautions for Use】
- Do not look directly or indirectly at the ultraviolet sterilization lamp with the naked eye while it is on, as it can cause eye pain or vision impairment.
- Do not expose skin directly or indirectly to ultraviolet light, as it can cause skin inflammation or sunburn.

Usage Method
This adult toy material is made of a special moisture-absorbing material that becomes slippery and moist when wet.
To use, pour about a spoonful of water into the insertion opening and knead lightly by hand.
Once the internal moisture is drawn out and the internal surface is wet, it is ready.
The moisturizing components last for about 2-3 uses, but if the moisture weakens, please use the included lotion.
When cleaning the main body, do not knead it; rinse with water or similar.
After rinsing, wipe off moisture with a towel and store in a well-ventilated place.

Safety Warning
When washing, do not knead the main body excessively, as it may cause the moisturizing components to leak out.
After cleaning, wipe off moisture with a towel and store in a well-ventilated area.