This is a washing machine tub cleaner that powerfully removes mold with strong foaming.
By using a foaming agent that enhances the effect of sodium percarbonate, it thoroughly peels away accumulated dirt from the inside of the washing machine tub.
This is a type with an increased amount of Agent B.
■ How to Use
* This product is a washing machine tub cleaner that powerfully removes mold with strong foaming.By using a foaming agent that enhances the effect of sodium percarbonate, it thoroughly peels away accumulated dirt from the inside of the washing machine tub.
1. With the washing machine tub empty, add all of Agent A (powder) to the tub.2. Fill with water to the high water level and run the "Wash Cycle" for approximately 15 minutes.3. Turn off the power at this point, and add all of Agent B (liquid).4. Turn the power back on and run the "Wash Cycle" for approximately ? minutes.5. After that, with the water still at the high level, perform "Wash -> Rinse -> Drain" using the "Standard Cycle".
* You can also use leftover bathwater.* If you are using the "Tub Cleaning Cycle," after completing steps 1-3, skip step 4's "Wash Cycle" and only perform step 5's "Standard Cycle."* If a lot of dirt comes off, remove it with a net or similar tool.Also, depending on the amount of dirt and the washing machine, the peeled-off dirt may accumulate in the lint filter. In that case, remove the dirt from the lint filter.* After cleaning, if mold or other dirt remains on the tub, wipe it off with a towel or paper and rinse again.* This product may not be usable with overseas washing machines. Please contact your washing machine manufacturer.
■ Ingredients
Agent A: Sodium Percarbonate, Antibacterial Agent (Silver Zeolite)Agent B: Foaming Agent
■ Precautions for Use
* Does not sterilize all bacteria.* Do not use together or mix with chlorine-based or reducing-based bleaches or cleaners, as this will reduce effectiveness.* Do not use with laundry inside the machine.* Do not use for purposes other than the intended use.* Keep out of reach of children and pets.* Do not use with hot water.* Individuals with sensitive skin should wear rubber gloves. Wash hands thoroughly after use.* To avoid inhaling powder or liquid, do not bring your face close when opening or adding the product.* Do not store in places with high humidity, high temperatures, or direct sunlight.* Do not place near fire.* Be careful not to scatter contents when opening.* Once opened, use the entire contents in one application.* The powder pack has small holes to prevent it from swelling. *Product specifications and appearance are subject to change without notice.* Hardening or separation may occur depending on storage conditions, but this does not affect the ingredients.* Do not use water that has had bath additives in it.
[First Aid]* If it gets on skin, rinse with water.* If accidentally swallowed, drink water.* If it gets into eyes, rinse with water for at least 15 minutes without rubbing.* In all cases, if you experience any abnormalities, consult a doctor and bring this product with you.
[Country of Origin]Japan
[Contact Information]Company Name: Liberta Co., Ltd.Phone: 0120-718-456Reception Hours: Weekdays 9:00 AM - 6:00 PM
[Manufacturer and Distributor]Company Name: Liberta Co., Ltd.Address: Seruian Tower 5F, 26-1 Sakuragaoka-cho, Shibuya-ku, Tokyo
[Product Classification]"Daily Goods"
* Please note that package design and other aspects are subject to change without notice.