Increased Agent B for more foam! Oxygen-based cleaner for drum washing machines to eliminate mold!
Clean immediately without the hassle of scooping out dirt!
■ How to Use
*This product is a washing machine tub cleaner that thoroughly peels off mold with powerful foaming.By using a foaming agent that enhances the effect of sodium percarbonate, it removes accumulated dirt from the inside of the washing machine tub from the root.
1. With an empty washing machine tub, add the entire amount of Agent A (powder).2. Fill with water to the high water level and run on the "Wash Cycle" for approximately 15 minutes.3. Turn off the power at this point, and add the entire amount of Agent B (liquid).4. Turn the power back on and run on the "Wash Cycle" for approximately ? minutes.5. After that, with the water still at the high level, perform "Wash -> Rinse -> Drain" on the "Standard Cycle".
*You can also use leftover bathwater.*If using the "Tub Cleaning Cycle", after completing steps 1-3, skip step 4's "Wash Cycle" and only perform step 5's "Standard Cycle".*If a lot of dirt comes out, remove it with a net or similar. Also, depending on the amount of dirt and the washing machine, peeled-off dirt may accumulate in the lint filter. In that case, remove the dirt from the lint filter.*After cleaning, if mold or other dirt remains in the tub, wipe it off with a towel or paper and rinse again.*This product may not be usable with overseas washing machines. Please contact your washing machine manufacturer.
■ Ingredients
Agent A: Sodium Percarbonate, Antibacterial Agent (Silver Zeolite)Agent B: Foaming Agent
■ Precautions for Use
*Does not disinfect all bacteria.*Do not use together with chlorine-based or reducing-based bleaches or detergents, as this will reduce effectiveness.*Do not use with laundry inside the machine.*Do not use for purposes other than the intended use.*Keep out of reach of children and pets.*Do not use with hot water.*Those with sensitive skin should wear rubber gloves. Wash hands thoroughly after use.*Do not bring your face close when opening or adding the product to avoid inhaling powder or liquid.*Do not store in places with high temperature and humidity, or in direct sunlight.*Do not store near fire.*Be careful not to scatter the contents when opening.*Once opened, use the entire amount in one use.*The powder pack has small holes to prevent it from swelling. *Product specifications and appearance are subject to change without notice.*Solidification or separation may occur depending on storage conditions, but this does not affect the ingredients.*Do not use water from baths with bath additives.
[First Aid]*If it gets on skin, rinse with water.*If accidentally swallowed, drink water.*If it gets into eyes, rinse with water for at least 15 minutes without rubbing.*In any case, if you experience any abnormalities, bring this product and consult a doctor.
[Country of Origin]Japan
[Contact Information]Company Name: Liberta Co., Ltd.Phone: 0120-718-456Reception Hours: Weekdays 9:00 AM - 6:00 PM
[Manufacturer and Distributor]Company Name: Liberta Co., Ltd.Address: Seruian Tower 5F, 26-1 Sakuragaoka-cho, Shibuya-ku, Tokyo
[Product Classification]"Daily Goods"
*Please note that package design and other aspects are subject to change without notice.