*The color may vary slightly for each product.

*Specifications and design may change slightly depending on the arrival time and lot.
Please understand this in advance.

*Depending on the environment, such as your display, the color and texture may differ slightly from the image.
Please understand.

*A protective film is attached to the acrylic hood to prevent scratches.
Please peel it off before use if it is not needed.

*Instruction manual is not included.


"Size (approx.)" Total length x Width x Height
35cm x 3.0cm x 3.5cm
80g

"Material"
Plastic, Acrylic, Aluminum, etc.

"Accessories"
Adhesive tape for installation x1
Mounting brackets x2
Wood screws x2
This is a set of two LED bar lights that have cleared IP45 dustproof and waterproof tests, equipped with highly versatile 6200k (Kelvin) chips, and utilize high-brightness LED 2835 SMD chips to achieve energy savings and brightness.


Can be used with a wide range of voltages from DC 12V to 86V.
For fishing boats, campers, microbuses, truck interior lighting, minivans, construction equipment, show windows, etc.
Despite the energy-saving 0.5A, it successfully achieves 900lm (lumens) with just 108 pieces by adopting the latest high-brightness LED chips.
(One bar is equivalent to a 100W type LED bulb)

An aluminum heat sink is used at the bottom of the frame.
Successfully achieved an LED lifespan of over 50,000 hours by efficiently dissipating heat.
The LED chips used are 2835 SMD chips.
The diffused light has a wide angle of 120°, providing an eye-friendly brightness that spreads naturally rather than the piercing brightness characteristic of LEDs.


108 of the latest 2835 SMD LED chips, boasting high performance and high brightness, are used in one bar.
Because the LED and heat sink (heat dissipation function) are integrated into the chip, the heat dissipation function is excellent; heat generated by the LED is transmitted through the heat sink equipped with the LED chip and finally to the aluminum main chassis.
One of the features is that it is difficult to get hot due to the heat dissipation design that prevents heat from concentrating at one point.


Each 2835 SMD LED chip has a brightness of MAX 25lm (lumens).
Since 108 chips are used in one bar, 25lm x 108 = 2700lm (lumens).
Theoretically, brightness can be pursued up to MAX 2700lm (lumens) per bar, but it was intentionally suppressed to about 900lm (lumens) per bar.
Therefore, it is a brightness-oriented LED bar that achieves brightness while emphasizing LED lifespan by suppressing heat generation.


"Expansive brightness with a beam angle of 120°.
Gentle on the eyes.
"
The 2835 SMD LED chip is an LED chip that is energy-saving and boasts high brightness.
It is high-performance, but the drawback is that each chip is relatively large.
The beam angle (irradiation angle) is a wide 120°, making the light irradiation expansive and gentle on the eyes.


"6200k (Kelvin) is daylight white.
It is light with a hue close to conventional fluorescent lamps.
"
The color temperature is 6200k (Kelvin), daylight white.
It is a natural light color close to the brightness of the sun.
It is a light color close to the color temperature of conventional fluorescent lamps.

Achieved 900lm (lumens) per bar while suppressing heat generation.
The brightness is equivalent to a 100W type LED bulb per bar.


"108 LED chips are arranged in a well-balanced manner, prioritizing brightness and considering heat dissipation effects.
"
108 LED chips are arranged efficiently with balance in mind.
Therefore, it was designed to efficiently disperse heat generation and prevent heat from being trapped inside.

However, since it is a model that prioritizes brightness more than the 72-LED type, heat generation will increase, so some caution is required.


"Not only for automobiles but also for ships.
"
Interior lights for campers, cabin lights and storage lighting for trucks, interior lights for trailer houses, interior lights for ships, interior lights for automobiles, lighting for camping, interior lights inside tents, etc.


"Staying in your car becomes twice as fun.
"
For minivan lighting, two bars should be sufficient.
Staying in your car will become more and more enjoyable.

Even at home, it can be sufficiently used if the environment is prepared, such as using an adapter for AC 100V > DC 12V to 86V.
For emergency lights, show window lighting, painting lighting, closet lighting, etc.


It can also be widely used as indirect lighting.


"Selectable switch placement.
"
Two types of switches have been adopted so that they can be installed vertically or horizontally depending on the limited installation space.

You can choose from two types: whether the switch location is on the vertical side or the horizontal side.


"Efficient heat dissipation with an aluminum housing that has good thermal conductivity.
"
A feature of this product is that heat dissipation is relatively low because it is operated at a load of about 30% of the LED's MAX performance.


"All necessary functions are provided.
"
Although it has daily waterproof performance, it is not designed for outdoor use, so please refrain from using it outdoors (such as intentionally getting it wet with water).


Since the power cord length is about 20cm, separate extension wiring work may be necessary depending on the case.


When installing with double-sided tape, please thoroughly remove dirt and oil from the installation area before mounting.


When installing with brackets and wood screws, fix the brackets to the installation location at two points with the wood screws.
(Calculate so that the LED bar is straight relative to the brackets before installation)

Snap the LED bar into the installed brackets.


A relatively smooth surface is an absolute requirement for locations where installation with double-sided tape is possible.


Please use your ideas for other methods, such as installing using magnets (sold separately).

2025/12/15 20:33:33#a705b3a008120032ef90cb6a919e3ba744ccf844