- This cleaner removes dirt using only water, without the need for detergent.
- Dirt can be easily removed by lightly scrubbing.
■How to Use
(1) Remove the worn-out cleaner from the main body and replace it with a spare.
* When attaching, press the cleaner against the surface with your hand, move it back and forth and side to side to ensure it is firmly fixed to the hook-and-loop fastener on the main body before use.
(2) Wet the entire cleaner with water, lightly scrub the dirty area to lift the dirt.
* Since the material is prone to tearing if scrubbed too hard, please use a gentle scrubbing motion.
* For curved surfaces or detailed parts, remove the cleaner from the main body and use separately.
* If it contains a lot of water, it may be difficult to attach. Wring it out lightly before attaching.
(3) Wipe off the lifted dirt with a dry cloth or rinse thoroughly with water.
(4) Rinse or lightly press and wash away any remaining dirt on the cleaner with water.
(5) After use, thoroughly drain the water and store in a well-ventilated place to prevent mold growth.
■Suitable Surfaces for Use
Enamel, tile, glass, non-glossy stainless steel or plastic surfaces, mirrors without anti-fog coating, ceramics, etc.* For plastic surfaces such as polycarbonate where scratching is a concern, test on an inconspicuous area beforehand.
■Unsuitable Surfaces
Glossy stainless steel or plastic surfaces, coated surfaces, painted surfaces, car exteriors, mirrors with anti-fog coating, absorbent surfaces, uneven surfaces.
■Materials
Nylon, polyethylene, polypropylene, silicone resin.
■Precautions for Use
- This product is a cleaning tool for bathrooms and bathtubs and should not be used for purposes other than its intended use.
- Using on uneven surfaces or scrubbing with excessive force may cause wear or tearing.
- Before use, be sure to wet the product with water. Using it dry will reduce effectiveness and may cause scratches.
- Do not use if there is attached hard debris or sand, as it may cause scratches.
- For plastic or glossy stainless steel surfaces, test on an inconspicuous area first to check for scratches.
- It will not remove lime-scale buildup around faucets or dirt embedded in joints or cracks.
- Avoid using boiling water sterilization, bleach, or mold removal agents.
- Do not place near fire or in high-temperature areas.
- When attaching the cleaner to the main body, wash and dry the hook-and-loop fastener thoroughly, then press it by hand, move it back and forth and side to side to ensure it is securely fixed.
- Dispose of the product according to local regulations when no longer needed.
- The appearance and specifications may change without notice.
【Country of Origin】Japan
【Contact Information】Company: Reck Co., Ltd. "Consumer Service Department"Phone: 03-5684-3000Hours: 9:00–17:00 (excluding Saturdays, Sundays, and holidays)
【Manufacturer and Distributor】Company: Reck Co., Ltd.Address: 8F, Kyobashi Trust Tower, 2-1-3 Kyobashi, Chuo-ku, Tokyo
【Product Category】"Daily necessities"
*Please note that packaging design and other details are subject to change without notice. Thank you for your understanding.