Quickly reset bedhead even in thick or stiff hair with a jet spray. Thanks to the action of water-styling ingredients*, bedhead is fixed simply by running your fingers through your hair after spraying. Provides a firm finish that stays in place. Fragrance-free.*(Ethyl betaine methacrylate/acrylates) copolymer
This is an aerosol product. Please be careful of fire and high temperatures when using or disposing of it.
Bedhead styling agent / Hair styling product
**How to Use*** Check the direction of the button, spray approximately 10–15 cm away from the hair, and then style with a brush or your fingers.* It is effective to apply a larger amount to bedhead or messy areas.* Use with the head of the can facing up without shaking. If used upside down, only gas will be released and the contents will remain inside.
**Ingredients**Water, DME, Ethanol, (Ethyl Betaine Methacrylate/Acrylates) Copolymer, Menthol, PEG-12 Dimethicone, PEG-12, Isostearyl Glyceryl
**Precautions for Use*** Do not use on areas with abnormalities such as wounds, swelling, or eczema.* Use carefully to check for any skin abnormalities. Discontinue use and consult a dermatologist if the product does not suit your skin, or if you experience redness, swelling, itching, irritation, loss of color (white spots, etc.), or darkening during use, or if similar abnormalities occur after exposure to sunlight. Continued use may worsen symptoms.* Do not spray around the eyelids or mucous membranes.* Avoid contact with eyes. If the product gets into the eyes or on the skin, rinse thoroughly with water immediately.* Be careful not to inhale.* Keep out of reach of children.
**Equipped with a "Gas Release Cap" (for discharging residual gas)*** When disposing of the product, gas must be released outdoors in a well-ventilated area away from fire.
**Notes:*** Use up the contents completely before performing this process outdoors away from fire.* Do not use this process on products with remaining contents, as a large amount of flammable liquid will be released, which is dangerous.* Do not use any cap other than the one provided with this product.
**How to Release Gas:**1. Remove the cap.2. Remove the push button.3. Turn the can upside down and press the nozzle firmly into the hole in the center of the cap placed face down.4. After the spray sound has completely stopped, dispose of the product according to the methods prescribed by your local municipality.
**Caution: Fire and High Temperatures**As this is a flammable product using high-pressure gas and is dangerous, adhere to the following precautions:1. Do not use near flames or fire.2. Do not use in large quantities in a room where fire is being used.3. Do not place in direct sunlight or near stoves or fan heaters where temperatures exceed 40 degrees Celsius, as there is a danger of bursting due to high temperatures.4. Do not put in fire.5. Use up completely before discarding.High-pressure gas: DME
**Country of Origin:** Japan
**Contact Information:**Company Name: Kao Corporation "Consumer Counseling Room"Phone: 0120-165-692Hours: 9:00–17:00 (Excluding Saturdays, Sundays, and holidays)
**Manufacturer and Distributor:**Company Name: Kao CorporationAddress: 1-14-10 Nihonbashi Kayabacho, Chuo-ku, Tokyo 103-8210
**Product Classification:** Cosmetics