Easy to use with light effort! Powerful collection!

The head features a three-dimensional cushion structure with a swirling pattern that captures dirt thoroughly and entangles it across the entire surface.

Designed for ease of use and stress-free operation. Lightweight at approximately 340 grams.

The head can reach into gaps as narrow as 3 cm and is highly maneuverable.

Even after repeated use, the pattern remains secure and does not loosen easily. It can be leaned against without falling over.

Suitable for use on flooring, tatami mats, walls, ceilings, and can be shortened for screens and doors.

■ Set Contents
- Quickle Wiper Main Unit
(Grip: 1 piece, Pipe (Handle): 3 pieces, Head: 1 piece)
- 1 Strong 3D Suction Wet Sheet (fragrance-free type)

■ Uses
Floors (wooden, vinyl), tatami mats, screens, walls, ceilings, etc.
*The specific applications may vary slightly depending on the type of dedicated sheet used.

■ How to Use

**Assembling the Wiper**
Please read the included instructions inside for assembly.
- Align the protrusion (button part) of part A with the groove of part B, and insert until you hear a click.
(This applies to the grip, three pipes, and the head—total of four connection points.)
- All pipes are identical.
- After assembly, ensure that all parts (grip, pipes, head) are securely attached and do not come loose.
- The pipes can be connected with one or two segments to make them shorter if desired.

**Attaching the Sheet**
1. Spread the sheet and place the head in the center.
2. Wrap the sheet around the head as if enveloping it, then insert and secure it into the four insertion points.
*Press firmly when inserting to prevent the sheet from coming off.

**Disassembling the Wiper**
1. Firmly press the button to eject the ring part.
2. Pull it out directly.
*Do not press the button if your fingers are holding the ring part, as it may prevent removal.
*The grip and head can be disassembled in the same manner.

■ Materials
- Pipe (Handle): Aluminum, Polycarbonate, Polyacetal
- Grip: Polypropylene, Styrene Elastomer, Polyacetal, Polycarbonate
- Head Plate: ABS Resin, Polycarbonate, Polyethylene, Polyacetal, Foam Urethane, Polypropylene
- Cushion Part: Styrene Elastomer

■ Precautions for Use
- Do not use for purposes other than intended. Dropping the pipe (handle) may cause damage.
- Excessive force may cause breakage.
- When removing the grip or pipe, press the buttons firmly and pull out.
(Weak pressing may damage the connection parts.)
- When dirty, wipe with water and dry in the shade. For heavy dirt, wipe with a diluted neutral detergent solution, then rinse with water.
(Alkaline or acidic detergents may damage the head.)
- When attaching the sheet, do not insert your fingers too deeply into the insertion points to avoid pinching.
*Be especially careful with small children.
- Do not attach anything other than the dedicated sheets.
- Please read the instructions carefully regarding the purpose, usage, and precautions for the dedicated sheets.

The cushion part of the head and the sheet insertion points may deteriorate and become fragile after long-term use. If damage becomes severe, please replace with a new Quickle Wiper main unit. Keep the packaging and the enclosed instructions for reference.

【Country of Origin】
Japan

【Inquiries】
Company: Kao Corporation "Consumer Consultation Office"
Phone: 0120-165-693
Hours: 9:00–17:00 (excluding Saturdays, Sundays, and holidays)

【Manufacturer】
Kao Corporation
Address: 1-14-10 Nihonbashi Kayabacho, Chuo-ku, Tokyo 103-8210

【Product Category】
"Daily necessities"

*Please note that packaging design and other details are subject to change without notice. Thank you for your understanding.