"Narrow Space Design Reaching the Back of the Rack" Inside server racks and cabinets, cables and equipment are densely packed, and work in hard-to-reach areas where fingers cannot easily enter occurs daily.
This product features a slender and slim body shape, allowing it to be inserted straight into cage nut positions at the back of the rack, which were previously inaccessible and left for later.
Leverage is applied naturally, enabling stable operation even from narrow and difficult-to-view angles.
For those who frequently handle the inside of racks for wiring changes or equipment additions/replacements, this is a practical design that boosts on-site work efficiency.

"Hold Structure That Grips and Doesn't Let Go of Nuts" The gripping part at the tip has a shape that firmly grasps both edges of the cage nut with a surface, employing a structure that prevents slippage once gripped during work.
Even in situations where nuts tend to fall off when pushed in by hand, this product allows for insertion and removal from rack holes while held by the tool, reducing installation errors and the hassle of repeated attempts.
The connecting screw at the top of the body is designed to allow fine adjustment of the gripping force, enabling optimization according to the on-site situation, such as tightening for firmly fitted nuts and loosening for removal.

"Safe Design to Eliminate the Burden of Bare-Hand Work" Forcing cage nuts with bare hands or a flathead screwdriver carries the risk of breaking fingernails or pinching fingers and causing injury.
This product allows for installation and removal while holding the nut with the tool, eliminating the need to directly touch the nut body with your fingers.
The tip has a shape that prevents force from escaping even with hard nuts or narrow metal holes, eliminating the need for brute-force work.
This safety-oriented design reduces strain on hands and fingers, allowing for work to proceed smoothly even during long assembly/maintenance tasks or in environments where cage nuts are frequently attached and detached.

"Ultra-Lightweight Aluminum Compatible with Both M5/M6" The body is made of aluminum, weighing approximately 26g, designed to prevent hand fatigue even when held for extended periods.
The body size is a compact approximately 7.5x4.4x1.3cm, making it easy to fit into gaps in toolboxes or work pouches, and convenient for carrying to job sites.
It is compatible with both M5 and M6 size cage nuts, covering the main standards commonly used in server racks and network racks with a single tool.
The surface is finished to minimize scratching of the work surface, a highly practical design that can be used while minimizing impact on equipment and rack paint.

"Product Specifications" Material: Aluminum / Body Size: Approx. 7.5x4.4x1.3cm / Weight: Approx. 26g / Compatible: M5/M6 Cage Nuts
"Precautions" Even for M5/M6 standard cage nuts, the detailed shape may vary depending on the manufacturer and lot. Please confirm the compatibility between your cage nuts and the gripping part of this product's tip before use.
It may not fit depending on the shape.

2026/07/08 15:09:36#0da0c13f04e652de4d4d9a3242389061a188c5f3