[0° to 110° freely adjustable angle with a mechanical locking system via a central wheel] This product is a lift-support hinge that can hold the top-opening lid at any angle. It has a large central wheel with internal solid rollers and nylon pads, which seamlessly locks the lid in place at the lifted position using a mechanical principle.
The maximum opening angle is a wide approximately 110°, allowing you to release your hand at any desired height according to your needs, preventing accidents caused by heavy lids slamming shut.
Furthermore, the included hexagonal crank allows for fine adjustment of the wheel's center: clockwise for stronger holding force and counter-clockwise for weaker holding force. This enables you to adjust the opening/closing speed and the firmness of the stopping position according to the weight of the lid.

[Zinc alloy body with nickel plating for rust and moisture resistance, robust design with solid, thickened casting for long-term use] The main body is made of carefully selected zinc alloy with a nickel-plated surface, making it resistant to rust even in humid environments like kitchens, bathrooms, washrooms, and dressing rooms, while maintaining its glossy mirror-like finish for a long time.
The arm part features a solid, thickened casting with a substantial build, approximately 16mm wide at the base plate and 3mm thick at the arm, ensuring a robust design that is resistant to sagging and deformation even with repeated opening and closing.
The surface is resistant to oxidation even with long-term use, and it supports a wide range of cabinet heights from 200 to 500mm, making it suitable for various storage furniture in your home.

[Symmetrical design for both left and right use, one type supports both sides, and bi-fold cabinets can be installed offset] This product is a support hinge with a symmetrical design that can be used on both the left and right sides. It is compatible not only with single-sided cabinet installations but also with bi-fold cabinets and storage boxes that open to both sides.
When used on both sides simultaneously, simply install the two hinges in opposite orientations (one as left-spec and the other as right-spec) to ensure balanced installation on either side of the door.
No additional parts are required for either single-wing or bi-fold applications. This versatile single model allows for a streamlined process from design to installation, making it widely applicable for DIY furniture creation and repair of existing furniture.

[Set of 2, load capacity 5-8kg, supports a wide range of door sizes from 200-500mm cabinet height] This product is a set of two hinges. When used together, they can securely hold top-opening lids and doors with a load capacity of 5-8kg.
It supports a wide range of cabinet heights from 200mm to 500mm, making it universally applicable for various top-opening doors in your home, including upper kitchen cabinets, TV stands, wardrobes, lift-up desk tops, and flip-up lids for DIY furniture.
Included accessories are a hexagonal crank for angle adjustment and mounting screws. You can start the installation immediately after unpacking without purchasing additional tools or parts.

[Product Specifications] Material: Zinc Alloy / Surface Treatment: Nickel Plating / Size: Overall Length 207mm, Upper Bracket 45x32x16mm, Lower Bracket 45x32mm, Arm Thickness 3mm+2mm / Opening Angle Range: 0° to 110° / Load Capacity: 5-8kg / Applicable Cabinet Height: 200-500mm / Accessories: Hexagonal Crank, Screws / Set Contents: Set of 2
[Notes] (1) The installation instructions are printed on the packaging bag; a separate instruction manual is not included. We recommend checking installation videos or similar resources beforehand. (2) It is designed for both left and right use, but when using on both sides simultaneously, you must disassemble the unit and reassemble one hinge in the left-spec orientation and the other in the right-spec orientation for offset installation. (3) Please note that there may be slight individual differences in color tone and minor dimensions depending on the production lot.
2026/09/04 16:18:32#94adfe7407b9237fcdbbde58b1048ca946e9464c