A special high-viscosity rubber material with a high-viscosity layer that is applied to the heel of the shoe sole to reduce wear, offering both flexibility and abrasion resistance.
The two-layer structure, with an adhesive surface that adheres to the shoe sole and a surface layer resistant to friction, protects the heel from wear during walking.
The material is flexible and stretchy, making it difficult for walking sounds to echo even on hard floors, and it is also waterproof and stain-resistant.

"Easy to apply and remove, can be slightly adjusted with scissors" Simply turn the shoe inside out, wipe the heel area of the sole clean with alcohol or similar, peel off the film, and stick it to the heel half-moon area of the sole.
The thin design does not change the height of the shoe, making it less likely to cause discomfort, and the size can be finely adjusted by cutting the edges with scissors.
When you want to remove it, you can peel it off by warming it with a hairdryer, so it is designed to leave little to no residue.

"Available in 4 sizes from 23.5 to 27cm, easy to match with your footwear" We offer four sizes: 23.5-24cm, 24.5-25cm, 25.5-26cm, and 26.5-27cm.
With a dedicated design for each size, it conforms to the curve of the heel and is compatible with a wide range of shoes for both men and women.
By choosing a size close to your shoe size, it becomes easier to prevent overhangs and unevenness after application.

"Available in 4 colors x 1 set of 4 pieces for cost-effectiveness for 2 pairs" Available in 4 colors: black, clear, blue, and red, so you can choose according to the color of your shoe sole or your preference.
Comes in a set of 4 pieces (equivalent to 2 pairs), which can be used as a left and right pair plus a spare.
Recommended for those who want to reinforce the heels of their favorite sneakers or leather shoes and extend the life of the shoes themselves.

"Product Specifications" Material: Rubber (with high-adhesion layer) / Size: 23.5-24cm / Set quantity: 4 pieces (for 2 pairs) / Color: Red
"Precautions" Before applying, wipe off dirt and oil with alcohol or similar, and let it dry for about 5 minutes before applying.
For soles with a honeycomb structure or strong unevenness, adhesion may be difficult and peeling may occur, so we recommend using a commercial shoe repair adhesive or applying weight for about 24 hours to set.
Due to the thin design, please consider using a repair agent in advance for deep wear or to fill heel holes.

2026/08/17 12:22:12#866417da1b8dfe281695a53ab53d92d79aee0350