Recommended for those who are installing a new modem in an office, adjusting the placement of Wi-Fi routers or home gateways (HGW), moving, have cut the cable in use, or are purchasing as an extension cable when changing room layouts, and have received many satisfied voices.
For customers who urgently need a cable now but have searched at electronics stores and found none in stock, and when inquiring with the contracted manufacturer, the wait is quite long and the cost is several times higher... We have also received happy feedback from such customers.

*Product Description* It is compatible with genuine cables from various companies, and there is almost no difference in line speed.
I tried using a speed test site for optical lines, and there was no significant performance degradation.
Customers who purchased have also said it performs the same as NTT's genuine product.
(Differences may occasionally be observed depending on your environment.
Thank you for your understanding.)
)
*Installation Method* The mechanism for attaching this optical cable terminal is: 1. Remove the protective caps at both ends, 2. Align the blue plastic protrusion and insert until it clicks, 3. Hold the cable protection part that extends from the same plastic and push further until it clicks into place.
*Features of this product* Unlike NTT's genuine shutter-type connector, the connection part is simple, and since you only need to remove the protective cap at the tip of the connector, it does not take much time to install.
Customers considering connecting it to their current product can understand by carefully examining the connector part of their existing cable.
Connecting and disconnecting the cable is very easy, so anyone can use it with confidence.
When in use, the connection part has a cap, so please remove it before use.
*Flexible and firm cable for safe use.*
Because it is flexible, even if you bend the cable to fit the installation position, it will not affect the line speed.

*Supported Devices* This cable is used with NTT, optical outlets, Docomo, Docomo Hikari, SoftBank, au, NURO Hikari, and other providers, so it is compatible with all manufacturers.
Please use it with confidence.
Router NTT compatible models: PR-500, RS-500, PR-400, PR-A300, PR-S300, PR-S300SE, etc.
*Product Details* An optical cable with SC connectors on both sides.
Ideal for exposed wiring.
Cable outer diameter: 2.8mm, Connector color: Blue, Connector type: SC, Polished surface: SPC, Pressure-resistant specifications.
Can be used in places where pressure on the cable may occur.
Specifications: SM (Single Mode) 9/125, SC connector, Polished surface: SPC, Cable outer diameter: 3mm, Wavelength: 1310/1550nm, Pressure-resistant, Flame-retardant specifications.
2026/06/05 11:10:08#3f6f52a211a107c262167bcc007696f6b9740dfd