Code: 4549550174749

Brand: Elecom (ELECOM)

Model: ECT-0720WH

Product color: White

Size information: 2) Outlet 12

Product size: Height 0.1, Width 13, Depth 13

Product weight: 855

About this product
This is a tower-shaped USB power strip with 12 outlets and 5 USB ports integrated.
Equipped with USB ports, allowing simultaneous charging of smartphones and tablets without using an AC adapter, alongside a computer.
The outlets are equipped with a "dust prevention shutter" to prevent dust entry when not in use.
The outlets use heat-resistant thermosetting resin that is less likely to melt in case of heat generation, effectively preventing electrical fires.
The outlets are staggered by 45 degrees per layer, making it less likely to interfere with other outlets when connecting large plugs such as AC adapters.
Equipped with a device (varistor) that absorbs lightning surges up to 12,500V caused by induced lightning, protecting connected devices. (Surge voltage of 12,500V is based on JEC210/212 standards. Performance may degrade depending on voltage received and number of surges.)
Uses a double-coated cord compliant with the Japan Wiring System Industry Association standard (JWDS0010). Effective in preventing electric shock and fire caused by disconnection or damage to the coating.
Increased display count for the brand Elecom (ELECOM)
Color: White
Total power outlets: 12
Voltage: 125 volts
Features USB slots about this product
This is a tower-shaped USB power strip with 12 outlets and 5 USB ports integrated.
Equipped with USB ports, allowing simultaneous charging of smartphones and tablets without using an AC adapter, alongside a computer.
The outlets are equipped with a "dust prevention shutter" to prevent dust entry when not in use.
The outlets use heat-resistant thermosetting resin that is less likely to melt in case of heat generation, effectively preventing electrical fires.
The outlets are staggered by 45 degrees per layer, making it less likely to interfere with other outlets when connecting large plugs such as AC adapters.
Equipped with a device (varistor) that absorbs lightning surges up to 12,500V caused by induced lightning, protecting connected devices. (Surge voltage of 12,500V is based on JEC210/212 standards. Performance may degrade depending on voltage received and number of surges.)
Uses a double-coated cord compliant with the Japan Wiring System Industry Association standard (JWDS0010). Effective in preventing electric shock and fire caused by disconnection or damage to the coating.
Increase display count

Shipping size: Height 21.3, Width 13.8, Depth 13.8

Shipping weight: 880

Specifications
Compatible devices: Devices operating using 2-pin outlets or USB-A ports for power supply or charging.
Main body outlet shape: 2-pin
Number of main body outlets: 12
AC rated output power: 1500W
AC rated output voltage: 125V
AC rated output current: 15A
USB terminals: USB-A ports 5
USB rated output power: total 24W (1 port 12W)
USB rated output voltage: DC 5V
USB rated output current: total 4.8A (1 port 2.4A)
Plug specifications: 2-pin
Swing plug:
Insulated cap plug:
Cable length: approximately 2.0m
Double coating:
Switch:
Lightning guard:
Dust shutter:
Pull-out prevention function:
Magnet:
Wall-mount hook:
Noise filter:
Power indicator lamp:
Modular jack included:
Color: White
Material: Main body: PC resin, Outlet: Urea resin
External dimensions: approximately Width 130, Depth 130, Height 198 (mm), excluding cable and plug parts
Weight: approximately 855g
Usable region: Japan domestic
Electrical appliance law: PSE compliant
Warranty period: 1 year
Accessories: 5 fixing screws (including 1 spare), Instruction manual
Other: Equipped with a movable leg part for preventing tipping, which can be temporarily fixed with screws using the legs.

Description
This is a tower-shaped USB power strip with 12 outlets and 5 USB ports integrated.
Equipped with USB ports, allowing simultaneous charging of smartphones and tablets without using an AC adapter, alongside a computer.
The outlets are equipped with a "dust prevention shutter" to prevent dust entry when not in use.
The outlets use heat-resistant thermosetting resin that is less likely to melt in case of heat generation, effectively preventing electrical fires.
The outlets are staggered by 45 degrees per layer, making it less likely to interfere with other outlets when connecting large plugs such as AC adapters.
Equipped with a device (varistor) that absorbs lightning surges up to 12,500V caused by induced lightning, protecting connected devices. (Surge voltage of 12,500V is based on JEC210/212 standards. Performance may degrade depending on voltage received and number of surges.)
Uses a double-coated cord compliant with the Japan Wiring System Industry Association standard (JWDS0010). Effective in preventing electric shock and fire caused by disconnection or damage to the coating.
The cable can be taken out downward or horizontally using the groove on the bottom surface.
The groove for taking out the cable from the side can be covered with the included part.
The pins of the 2-pin outlet plug are equipped with an insulation sleeve, which is effective in preventing fires caused by tracking phenomena.
Adopts a 180-degree swingable outlet plug for easy installation in narrow places.
Equipped with 5 USB-A ports, allowing simultaneous charging of 5 compatible smartphones. Total output of 4.8A, with 2.4A per port.
The high-performance IC built into the USB ports recognizes connected devices and supports "Omakase Charging" for appropriate output.
By pulling out the leg parts stored on the bottom of the main body, stable placement is possible even if the weight distribution is biased due to connected adapters.
The leg parts are equipped with anti-slip members, making the main body less likely to slide sideways when cables are pulled.
The leg parts have holes, allowing temporary fixation using the included screws.
The bottom of the main body also has holes for temporary fixation, which can be hooked onto screws or similar to install on walls.
Various cables necessary for charging via USB ports are not included; please purchase separately.
If fixing the product to a house or furniture with screws, electrical work by a licensed electrician is required.
This product meets at least one of the company's environmental certification standards and displays the "THINK ECOLOGY" mark.
Committed to environmental conservation, this product's packaging reduces plastic weight by over 20% compared to standard products.
Committed to environmental conservation, this product's packaging consists only of paper, cardboard, or plastic bags.

Inquiries about the product
Elecom General Information Center
TEL. 0570-084-465
FAX. 0570-050-012
Reception hours / 10:00~19:00, open year-round, including holidays



Tower-type Design Tap

Access store


Magnet-equipped Tap

Access store


10-outlet Switchable Tap

Access store


USB-equipped Tap

Access store


Wood grain style Tap

Access store



Elecom Co., Ltd. is committed to enhancing your lifestyle through peripheral devices such as smartphones, tablets, and PCs. Manufacturer's description

This is a tower-type power strip with 12 outlets and 5 USB ports, with a total maximum output of 4.8A. The USB ports and outlets are arranged in a 360-degree radial pattern, making it ideal for use on conference room tables. Using the movable leg parts, stable placement is possible even if the weight is biased due to heavy power adapters, and holes are provided for temporary fixation with screws.

Six product features
Six convenient functions

Outlet plug

Adopts a 180-degree swingable outlet plug for easy installation in narrow places.

The pins of the 2-pin outlet plug are equipped with an insulation sleeve, which is effective in preventing fires caused by tracking phenomena.

AC outlet body material

Equipped with a "dust prevention shutter" to prevent dust entry when not in use.

Furthermore, it uses heat-resistant thermosetting resin that is less likely to melt in case of heat generation, effectively preventing electrical fires.

Cable

Uses a double-coated cord compliant with the Japan Wiring System Industry Association standard (JWDS0010). Effective in preventing electric shock and fire caused by disconnection or damage to the coating.

Lightning surge function

Equipped with a device (varistor) that absorbs lightning surges up to 12,500V caused by induced lightning, protecting connected devices. (Maximum surge voltage of 12,500V is based on JEC210/212 standards. Performance may degrade depending on received voltage and number of surges.)


ECT-0620BK

ECT-0720BK

ECT-0620WH

ECT-0720WH


Add to cart

Add to cart

Add to cart

Add to cart

Customer reviews
4.4 out of 5 stars
5,030

4.4 out of 5 stars
5,030

4.4 out of 5 stars
5,030

4.4 out of 5 stars
5,030

Price
3,783
3,783
3,920
3,920
3,934
3,934
4,490
4,490
Number of outlets: 8 or 12 outlets
Number of USB ports: 5 USB-A ports
Cable length: 2.0m

ECT-2120BK

ECT-2220BK

ECT-2120WH

ECT-2220WH


Add to cart

Add to cart

Add to cart

Add to cart

Customer reviews
4.4 out of 5 stars
5,030

4.1 out of 5 stars
221

4.4 out of 5 stars
5,030