Code: 4549550297066

Brand: Elecom (ELECOM)

Model: P-TPWIRE01WWH

Product color: White

Product size: Height 16.5, Width 9, Depth 9

Product weight: 13

About this product
This is a wireless charging touch pen exclusively for iPad that can be attached to the main body of the iPad and charged, similar to the Apple Pencil (2nd generation).
By magnetically attaching the touch pen to the side of the iPad, wireless charging is possible.
When not in use, simply attaching it to the iPad charges the pen, allowing use without worrying about the battery running out.
The magnet surface is flat, making it less likely to roll when placed on a table, and it has a shape that easily adheres closely to the iPad.
Depending on the case attached to the iPad, the magnet part of the iPad may be hidden, making it impossible to attach this product.
› See more Color: White
Brand: Elecom (ELECOM)
Material: Pen tip: POM, Main body: ABS
Product weight: 13 grams
Compatible devices: iPad Air (4th generation and later), iPad Pro 12.9 inch (3rd generation and later), iPad Pro 11 inch (all generations), iPad mini (6th generation)
Product dimensions (L x W x H): 9 x 9 x 16.5 cm
Includes battery: Yes
Does it require a battery? No
Product diameter: 9 millimeters
About this product
This is a wireless charging touch pen exclusively for iPad that can be attached to the main body of the iPad and charged, similar to the Apple Pencil (2nd generation).
By magnetically attaching the touch pen to the side of the iPad, wireless charging is possible.
When not in use, simply attaching it to the iPad charges the pen, allowing use without worrying about the battery running out.
The magnet surface is flat, making it less likely to roll when placed on a table, and it has a shape that easily adheres closely to the iPad.
Depending on the case attached to the iPad, the magnet part of the iPad may be hidden, making it impossible to attach this product.
› See more

Shipping size: Height 20, Width 7.1, Depth 1.7

Shipping weight: 30

Specifications
Compatible models: iPads compatible with Apple Pencil (2nd generation). As of November 2023, it is necessary to update to iOS 12.2 or later. Please see the official website for the list of confirmed compatible models.
External dimensions: Total length: approximately 165mm, Diameter: approximately 9mm, Pen tip: approximately 1.0mm
Material: Pen tip: POM, Main body: ABS
Color: White
Weight: approximately 13g
Battery: Lithium-ion battery
Usage time: approximately 10 hours. Depending on usage conditions, this estimated time may be shorter, and recharging may be necessary earlier.
Charging time: approximately 2 hours. Varies depending on usage and environment.
Warranty period: 1 year
Pressure sensitivity:
Wireless charging:
Tilt detection:
Palm rejection:
Note: When using certain apps/software, if drawing is set to be done only with the dedicated touch pen, it may not be usable.

Description
This is a wireless charging touch pen exclusively for iPad that can be attached to the main body of the iPad and charged, similar to the Apple Pencil (2nd generation).
By magnetically attaching the touch pen to the side of the iPad, wireless charging is possible.
When not in use, simply attaching it to the iPad charges the pen, allowing use without worrying about the battery running out.
The magnet surface is flat, making it less likely to roll when placed on a table, and it has a shape that easily adheres closely to the iPad. Depending on the case attached to the iPad, the magnet part of the iPad may be hidden, making it impossible to attach this product.
The pen tip, about 1mm in diameter, allows detailed writing and is ideal for fine work.
The tilt detection function allows changing the line thickness depending on the tilt of the pen.
The deviation between the contact point of the pen tip and the actual drawing position is reduced, making it easier to write where you intend. However, it does not eliminate all feeling of deviation.
Since it supports palm rejection, it can be used without misoperation even if your hand touches the screen.
No pairing is required; simply turn on the power to start using immediately.
Press and hold the power button for 3 seconds to turn on/off, preventing accidental operation.
If there is no operation for 5 minutes, the auto-sleep function activates, preventing forgetting to turn off the power.
The LED lamp at the top of the pen indicates the on/off status at a glance.
It can be used continuously for about 10 hours. Depending on usage conditions, recharging may be needed sooner than this estimate.
The pen tip can be replaced with genuine Apple Pencil tips (1st and 2nd generation) or our P-TIPAP series compatible products, allowing you to customize the writing feel. Please use a screen protector film to prevent damage to the iPad screen. Depending on the type of screen protector, there may be scratching sounds during operation or reduced touch response.

Inquiries about the product
Elecom General Information Center
TEL. 0570-084-465
FAX. 0570-050-012
Reception hours / 10:00-19:00, open year-round
Chat support is also available. Please check 8056.jp for details. Manufacturer's explanation
Wireless charging active touch pen

This is a wireless charging touch pen exclusively for iPad that can be attached to the main body of the iPad and charged, similar to the Apple Pencil (2nd generation). It supports functions such as changing line thickness based on tilt and palm rejection. The pen tip can be replaced with genuine Apple Pencil tips (2nd generation) or our compatible products to suit your preferred writing feel.

Please check the supported models on the official Elecom website before purchasing.

iPad compatible with Apple Pencil 2nd generation. As of November 2023.







Wireless charging via magnetic attachment

By magnetically attaching the touch pen to the side of the iPad, wireless charging is possible. When not in use, simply attaching it to the iPad charges the pen, allowing use without worrying about the battery running out.

Depending on the case attached to the iPad, the magnet part of the iPad may be hidden, making it impossible to attach this product.


Flat and easy-to-adhere magnet surface

The magnet surface is flat, making it less likely to roll when placed on a table, and it has a shape that easily adheres closely to the iPad.


Easy for detailed work

The pen tip, about 1mm in diameter, allows detailed writing.







Tilt detection function

The tilt detection function allows changing the line thickness depending on the tilt of the pen.


Palm rejection support

Since it supports palm rejection, it can be used without misoperation even if your hand touches the screen.


Reduces deviation between contact point and drawing position

The deviation between the contact point of the pen tip and the actual drawing position is reduced, making it easier to write where you intend.

Some slight deviation may still be felt.

Other features and external shape

P-TIPAP03, P-TIPAP04, CRP-TIP, APS01W, HP-TIP, APY01W, HP-TIP, APY01, CR

Add to cart

View details

Add to cart

Add to cart

Add to cart

Customer reviews
4.1 out of 5 stars
29

4.1 out of 5 stars
115

3.9 out of 5 stars
321

3.9 out of 5 stars
321

4.1 out of 5 stars
115

Price
1,418
1,418—
1,155
1,155
991
991
1,918
1,918
Pen tip diameter approximately 1.8mm, approximately 1mm, approximately 1mm, approximately 1.8mm, approximately 1.8mm
Features: Wear-resistant metal contact point, easy-to-see clear type, moderate friction feel, reproduces authentic writing feel, smooth glass surface with solid writing comfort