Code: 4549550353663

Brand: ELECOM

Standard: PWSTHD1SSSV

Product color: Silver

About this product
This is a one-port strap hole sheet that allows you to add a strap hole simply by inserting it between your smartphone and case.
Even if your smartphone case does not have a strap hole, you can use it just by passing it through the case's cable hole.
It can be easily removed and reused repeatedly even when changing cases.
Designed to fit the shape of the charging port of cases to prevent the case from floating and to reduce cable interference.
You can connect earphones and charging cables even when the sheet is attached.
› See more Brand: ELECOM
Color: Silver
Model name: PWSTHD1SS
Number of items: 1 About this product
This is a one-port strap hole sheet that allows you to add a strap hole simply by inserting it between your smartphone and case.
Even if your smartphone case does not have a strap hole, you can use it just by passing it through the case's cable hole.
It can be easily removed and reused repeatedly even when changing cases.
Designed to fit the shape of the charging port of cases to prevent the case from floating and to reduce cable interference.
You can connect earphones and charging cables even when the sheet is attached.
› See more

Shipping size: Height 7mm, Width 6.9mm, Depth 1.2mm

Shipping weight: 20g

Specifications
Set contents: Stainless steel strap hole sheet (one-port type) 1 piece
Size: W approximately 45mm, D approximately 0.5mm, H approximately 20mm
Material: Stainless steel
Color: Silver
Weight capacity: Up to approximately 10kg. Do not use on devices with a body weight of 250g or more.

Description
This is a one-port strap hole sheet that allows you to add a strap hole simply by inserting it between your smartphone and case.
Even if your smartphone case does not have a strap hole, you can use it just by passing it through the case's cable hole.
It can be easily removed and reused repeatedly even when changing cases.
Designed to fit the shape of the charging port of cases to prevent the case from floating and to reduce cable interference.
You can connect earphones and charging cables even when the sheet is attached.
Depending on your cable, charging may not be possible while the sheet is attached. In that case, please remove the strap hole sheet and use.
The recommended size for the case's charging port is width 12mm, height 6.5mm. It cannot be used with cases where the thickness of the charging hole area exceeds 2mm.
Uses a strong stainless steel material that is resistant to tearing even when pulled strongly.
The weight capacity is up to approximately 10kg. Do not use on devices with a body weight of 250g or more.
Includes a protective seal to prevent scratches on your smartphone.
Attach with the protective seal side that differs from the product color facing the smartphone.
A small size that does not damage the back design and provides a stylish, integrated look when attached.
The strap hole has a diameter of approximately 6mm. Please check the size of your strap's attachment part before purchasing.
Can be used with your preferred strap, such as a smartphone shoulder strap or hand strap.
Use with hybrid cases or soft cases (hard material on the back of the case is recommended). Do not use with silicone cases.
Cases with the cable hole located at the center of the bottom surface are recommended. Use is not recommended with cases that have large openings at the cable hole.
Do not use cases with sharp or protruding edges around the cable hole, as they may cause damage such as tearing the strap hole sheet.
This product meets at least one of our internal environmental standards and displays the "THINK ECOLOGY" mark.
It is designed to contribute to environmental conservation by reducing plastic weight in packaging containers by more than 20% compared to our standard products.

Product inquiries
Please check on the ELECOM homepage. Brand introduction


AC charger

Visit store


Tap

Visit store


Mobile battery

Visit store


Mouse

Visit store


Keyboard

Visit store



Elecom Co., Ltd. aims to enrich and make our customers' lifestyles more comfortable through peripheral devices such as smartphones, tablets, and computers. Manufacturer's description

This is a one-port strap hole sheet that allows you to add a strap hole simply by inserting it between your smartphone and case. Please attach with the protective seal side that differs from the product color facing the smartphone.







Can be used with your preferred strap, such as a smartphone shoulder strap or hand strap.

Size: W approximately 45mm, D approximately 0.5mm, H approximately 20mm

The strap hole diameter is recommended to be approximately 6mm. Please check the size of your strap's attachment part before purchasing.

Uses a strong stainless steel material that is resistant to tearing even when pulled strongly.

The weight capacity is up to approximately 10kg. Do not use on devices with a body weight of 250g or more.


Strap holder stainless steel, anti-floating bent design

Strap holder smartphone strap

Strap holder smartphone strap

MagSafe compatible smartphone ring 360-degree rotation magnetic stand with non-slip


Add to cart

Add to cart

Add to cart

Add to cart

Customer reviews
4.3 out of 5 stars
82

3.4 out of 5 stars
95

3.4 out of 5 stars
95

4.0 out of 5 stars
56

Price
980 yen
980 yen
1,331 yen
1,331 yen
798 yen
798 yen
1,779 yen
1,779 yen
Color: Silver / Gold / Pink Gold / Black Clear / Clear Black
Size: W approximately 45mm, D approximately 0.5mm, H approximately 20mm; W 65mm, D 0.6mm, H 53mm; W 65mm, D 0.6mm, H 52mm (main body when folded): W approximately 58mm, D approximately 5.5mm, H approximately 58mm (including protrusions)
Weight capacity: Up to approximately 10kg. Do not use on devices with a body weight of 250g or more. Up to approximately 2.5kg. Do not use on devices with a body weight of 250g or more. Up to approximately 2.5kg. Do not use on devices with a body weight of 250g or more. Approximately 800g. Designed for smartphones weighing up to approximately 250g.