Code: 4549550207867

Brand: ELECOM

Standard: T-KF04-21030BK

Product color: Black

Size information: 3m

Product size: Height 0.1, Width 4.3, Depth 29.5

Product weight: 480

About this product
This is a power strip equipped with a total of 10 two-pin outlets, with 5 outlets on the top surface and 5 on the side surfaces. By deploying the leg parts, it becomes less likely to tip over when connecting heavy AC adapters or similar devices. It also features a 10mm diameter hanging hole, a 5mm diameter screw fixing hole, and an L-shaped D-shaped hole on the bottom surface, allowing it to be hung or fixed to walls using the included tapping screws. The cord length is 3m.
This is a power strip equipped with a total of 10 two-pin outlets, with 5 outlets on the top surface and 5 on the side surfaces.
By arranging the outlets on two sides, it remains compact despite having 10 outlets.
Deploying the leg parts makes it less likely to tip over when connecting heavy AC adapters or similar devices.
The leg parts are equipped with a 10mm diameter hanging hole, a 5mm diameter screw fixing hole, and an L-shaped D-shaped hole on the bottom surface, allowing it to be hung or fixed to walls using the included tapping screws.
The center-to-center distance between outlets is designed to be at least 40mm to prevent interference between plugged-in devices. Additionally, the end outlets on each surface are spaced 57mm apart for easier use with large AC adapters.
It is equipped with a "dust prevention shutter" to prevent dust entry when the outlets are not in use.
Increases display count with the ELECOM brand.
Cable length: 3 meters
Color: Black
Total number of power outlets: 10
Voltage: 125 volts About this product
This is a power strip equipped with a total of 10 two-pin outlets, with 5 outlets on the top surface and 5 on the side surfaces. By deploying the leg parts, it becomes less likely to tip over when connecting heavy AC adapters or similar devices. It also features a 10mm diameter hanging hole, a 5mm diameter screw fixing hole, and an L-shaped D-shaped hole on the bottom surface, allowing it to be hung or fixed to walls using the included tapping screws. The cord length is 3m.
This is a power strip equipped with a total of 10 two-pin outlets, with 5 outlets on the top surface and 5 on the side surfaces.
By arranging the outlets on two sides, it remains compact despite having 10 outlets.
Deploying the leg parts makes it less likely to tip over when connecting heavy AC adapters or similar devices.
The leg parts are equipped with a 10mm diameter hanging hole, a 5mm diameter screw fixing hole, and an L-shaped D-shaped hole on the bottom surface, allowing it to be hung or fixed to walls using the included tapping screws.
The center-to-center distance between outlets is designed to be at least 40mm to prevent interference between plugged-in devices. Additionally, the end outlets on each surface are spaced 57mm apart for easier use with large AC adapters.
It is equipped with a "dust prevention shutter" to prevent dust entry when the outlets are not in use.
Increases display count

Shipping size: Height 37.1, Width 10.7, Depth 4.4

Shipping weight: 550

Specifications
Main body outlet shape: 2-pin
Main body number of outlets: 10 outlets (5 on top / 5 on side)
Plug specifications: 2-pin
Includes 3-pin to 2-pin conversion adapter
Cord length: 3.0m
Rated: Up to 125V/15A/1500W
Switch:
Lightning guard:
Dust shutter:
Insulated cap included for plug:
Outlet caps included:
Power indicator lamp:
Double insulation:
Anti-slip function:
Swing plug:
Magnet:
Fixation method: Can be fixed using hanging holes (φ10mm) or screw fixing holes (φ5mm).
Noise filter:
Modular jack included:
Color: Black
Material: Main body: ABS resin, Plug: PVC, Outlet: Urea resin
External dimensions: Width 295mm, Depth 43mm, Height 38mm (excluding cord and plug parts)
Weight: approximately 480g
Usable area: Japan only
Electrical appliance safety law: PSE compliant
Warranty period: 1 year
Accessories: 3 fixing tapping screws (M3.5 20)
Other: Compact design with outlets on top and side surfaces. Equipped with rotating legs to prevent tipping.

Description
This is a power strip equipped with a total of 10 two-pin outlets, with 5 outlets on the top surface and 5 on the side surfaces.
By arranging the outlets on two sides, it remains compact despite having 10 outlets.
Deploying the leg parts makes it less likely to tip over when connecting heavy AC adapters or similar devices.
The leg parts are equipped with a 10mm diameter hanging hole, a 5mm diameter screw fixing hole, and an L-shaped D-shaped hole on the bottom surface, allowing it to be hung or fixed to walls using the included tapping screws.
The center-to-center distance between outlets is designed to be at least 40mm to prevent interference between plugged-in devices. Additionally, the end outlets on each surface are spaced 57mm apart for easier use with large AC adapters.
It is equipped with a "dust prevention shutter" to prevent dust entry when the outlets are not in use.
The outlets use heat-resistant thermosetting resin, which is less likely to melt even if heat is generated, helping prevent electrical fires.
Equipped with a varistor that absorbs lightning surges up to 12,500V caused by induced lightning, protecting connected devices. (Maximum surge voltage of 12,500V is based on JEC210/212 standards. Performance may degrade depending on voltage and number of surges received.)
The 2-pin plug is equipped with an insulating sleeve to prevent fires caused by tracking phenomena.
Uses a 180-degree swing plug for easy wiring in tight spaces.
The power cord uses a double-insulated cable compliant with Japan Wiring System Industry Association standards (JWDS0010), effectively preventing electric shock and fire caused by disconnection or damage to the insulation.
Installing this product by screwing it into a house or furniture requires an electrician.

Customer inquiries about the product
ELECOM General Information Center
TEL. 0570-084-465
FAX. 0570-050-012
Service hours / 10:00~19:00, open year-round Brand introduction



Tower-type design tap

Visit store


Magnet-equipped tap

Visit store


10-outlet switchable tap

Visit store


USB-equipped tap

Visit store


Wood grain finish tap

Visit store



ELECOM Inc. aims to enhance customer lifestyles through peripheral devices such as smartphones, tablets, and computers. Manufacturer's description

By arranging the outlets on two sides, it remains compact despite having 10 outlets.

Designed with a minimum center-to-center distance of 40mm between outlets to prevent interference with adjacent outlets when plugs are connected.

The leg parts are equipped with a 10mm diameter hanging hole, a 5mm diameter screw fixing hole, and an L-shaped D-shaped hole on the bottom surface, allowing it to be hung or fixed to walls using the included tapping screws.

Designed with a minimum center-to-center distance of 40mm between outlets to prevent interference with adjacent outlets when plugs are connected. Additionally, the end outlets on each surface are spaced 57mm apart for easier use with large AC adapters.

Uses a 180-degree swing plug for easy wiring in tight spaces.

It is equipped with a "dust prevention shutter" to prevent dust entry when the outlets are not in use.

The 2-pin plug is equipped with an insulating sleeve to prevent fires caused by tracking phenomena.

Equipped with a varistor that absorbs lightning surges up to 12,500V caused by induced lightning, protecting connected devices.


Tower-type power strip (8 outlets)

Clip-type power strip (3 outlets)

Power strip (7 outlets)

Power strip (10 outlets)

Wood grain finish power strip (6 outlets)

USB power strip (4 USB ports, 2 outlets)


Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Customer reviews
4.4 out of 5 stars
5,030 reviews

4.4 out of 5 stars
2,663 reviews

4.4 out of 5 stars
897 reviews

4.5 out of 5 stars
11,344 reviews

4.4 out of 5 stars
2,765 reviews

4.3 out of 5 stars
4,798 reviews

Price
3,783 yen
3,783 yen
1,665 yen
1,665 yen
2,190 yen
2,190 yen
1,782 yen
1,782 yen
1,880 yen
1,880 yen
2,380 yen
2,380 yen
Features USB ports and outlets arranged in a 360-degree radial pattern, suitable for use on conference room tables. The holes provided can be used for temporary fixing with screws. Equipped with a clip mechanism, it is a 3-outlet two-pin tap that can be clamped onto desks or similar surfaces. Using the movable leg parts, even when heavy items like power adapters are plugged in, it is less likely to tip over, and hooks can be passed through the holes to hang it on walls or other surfaces. A convenient 10-outlet tap that is stable and can be fixed to walls. Features a wood grain design that blends with interior decor. Slim tap with wide spacing between outlets for neat connection of AC adapters. Charges smartphones and computers with this single device. A cable-type mobile USB tap with two AC outlets and four USB ports integrated.