Special:B08HLD314B
Code:4549550174725
Brand: Elecom (ELECOM)
Model: ECT-0620WH
Product color: White
Size information: 1) Outlet 8
Product size: Height 15, Width 13, Depth 13
Product weight: 500
About this product
This is a tower-shaped USB power strip with 8 outlets and 5 USB ports integrated.
Equipped with USB ports, allowing simultaneous charging of smartphones and tablets without using an AC adapter, alongside a computer.
The outlets are equipped with a "dust prevention shutter" to prevent dust entry when not in use.
The outlets use heat-resistant thermosetting resin that is less likely to melt in case of heat generation, effectively preventing electrical fires.
The outlets are staggered by 45 degrees per layer, making it less likely to interfere with other outlets when connecting large plugs such as AC adapters.
Equipped with a device (varistor) that absorbs lightning surges up to 12,500V caused by induced lightning, protecting connected devices. (Surge voltage of 12,500V is based on JEC210/212 standards. Performance may degrade depending on voltage received and number of surges.)
Uses a double-coated cord compliant with the Japan Wiring System Industry Association standard (JWDS0010). Effective in preventing electric shock and fire caused by disconnection or damage to the coating.
Increased display count for the brand Elecom (ELECOM)
Color: White
Total power outlets: 8
Voltage: 125 volts
Features USB slots about this product
This is a tower-shaped USB power strip with 8 outlets and 5 USB ports integrated.
Equipped with USB ports, allowing simultaneous charging of smartphones and tablets without using an AC adapter, alongside a computer.
The outlets are equipped with a "dust prevention shutter" to prevent dust entry when not in use.
The outlets use heat-resistant thermosetting resin that is less likely to melt in case of heat generation, effectively preventing electrical fires.
The outlets are staggered by 45 degrees per layer, making it less likely to interfere with other outlets when connecting large plugs such as AC adapters.
Equipped with a device (varistor) that absorbs lightning surges up to 12,500V caused by induced lightning, protecting connected devices. (Surge voltage of 12,500V is based on JEC210/212 standards. Performance may degrade depending on voltage received and number of surges.)
Uses a double-coated cord compliant with the Japan Wiring System Industry Association standard (JWDS0010). Effective in preventing electric shock and fire caused by disconnection or damage to the coating.
Increase display count
Shipping size: Height 16.2, Width 13.8, Depth 13.6
Shipping weight: 740
Specifications
Compatible devices: Devices that operate using 2-pin outlets or USB-A ports for power supply or charging
Main body outlet shape: 2-pin
Number of main body outlets: 8
AC rated output power: 1500W
AC rated output voltage: 125V
AC rated output current: 15A
USB terminals: USB-A ports 5
USB rated output power: Total 24W (12W per port)
USB rated output voltage: DC 5V
USB rated output current: Total 4.8A (2.4A per port)
Plug specifications: 2-pin
Swing plug:
Insulated cap included plug:
Cable length: approximately 2.0m
Double coating:
Switch:
Lightning guard:
Dust shutter:
Retaining function:
Magnet:
Wall-mount hook:
Noise filter:
Power indicator lamp:
Modular jack included:
Color: White
Material: Main body: PC resin, Outlet: Urea resin
External dimensions: approximately Width 130, Depth 130, Height 150 (mm) excluding cable and plug parts
Weight: approximately 785g
Usable area: Japan domestic
Electrical appliance law: PSE compliant
Warranty period: 1 year
Accessories: 5 fixing screws (including 1 spare), Instruction manual
Other: Equipped with a movable leg part for preventing tipping, which can be temporarily fixed with screws using the legs, etc.
Description
This is a tower-shaped USB power strip with 8 outlets and 5 USB ports integrated.
Equipped with USB ports, allowing simultaneous charging of smartphones and tablets without using an AC adapter, alongside a computer.
The outlets are equipped with a "dust prevention shutter" to prevent dust entry when not in use.
The outlets use heat-resistant thermosetting resin that is less likely to melt in case of heat generation, effectively preventing electrical fires.
The outlets are staggered by 45 degrees per layer, making it less likely to interfere with other outlets when connecting large plugs such as AC adapters.
Equipped with a device (varistor) that absorbs lightning surges up to 12,500V caused by induced lightning, protecting connected devices. (Surge voltage of 12,500V is based on JEC210/212 standards. Performance may degrade depending on voltage received and number of surges.)
Uses a double-coated cord compliant with the Japan Wiring System Industry Association standard (JWDS0010). Effective in preventing electric shock and fire caused by disconnection or damage to the coating.
The cable can be taken out downward or horizontally using the groove on the bottom surface.
The groove for taking out the cable from the side can be covered with the attached part (cap).
The pins of the 2-pin outlet plug are equipped with an insulation sleeve, which is effective in preventing fires caused by tracking phenomena.
Adopts a 180-degree swingable outlet plug for easy installation in narrow places.
Equipped with 5 USB-A ports, allowing simultaneous charging of 5 compatible smartphones. Total output of 4.8A, with 2.4A per port.
The high-performance IC built into the USB ports recognizes connected devices and supports "Omakase Charging" to charge with appropriate output.
By pulling out the leg parts stored on the bottom of the main body, stable installation is possible even if the weight distribution is biased due to connected adapters or other items.
The leg parts are equipped with anti-slip members, making the main body less likely to slide sideways when cables are pulled.
The leg parts have holes, allowing temporary fixation using the included screws.
The bottom of the main body also has holes for temporary fixation, which can be hooked onto screws or similar to install on walls.
Various cables necessary for charging via USB ports are not included; please purchase separately.
If fixing the product to a house or furniture with screws, electrical work by a licensed electrician is required.
This product meets at least one of the company's environmental certification standards and displays the "THINK ECOLOGY" mark.
Committed to environmental conservation, this product's packaging reduces plastic weight by over 20% compared to standard products.
Committed to environmental conservation, this product's packaging consists only of paper, cardboard, or poly bags.
Inquiries about the product
Elecom General Information Center
TEL. 0570-084-465
FAX. 0570-050-012
Reception hours / 10:00~19:00, open year-round, brand introduction
Tower-type Design Tap
Access store
Magnet-equipped Tap
Access store
10-outlet Switchable Tap
Access store
USB-equipped Tap
Access store
Wood grain style Tap
Access store
Elecom Co., Ltd. is committed to making customers' lifestyles more comfortable through peripheral devices such as smartphones, tablets, and PCs. Manufacturer's description
This is a tower-type power strip with 8 outlets and 5 USB ports, with a maximum total output of 4.8A. The USB ports and outlets are arranged radially at 360 degrees, making it ideal for use on conference room tables. The movable leg parts help stabilize the device even when heavy power adapters cause imbalance, and the holes provided can be used for temporary fixation with screws.
Six product features
Six convenient functions
Outlet plug
Adopts a 180-degree swingable outlet plug for easy installation in narrow places.
The pins of the 2-pin outlet plug are equipped with an insulation sleeve, which is effective in preventing fires caused by tracking phenomena.
AC outlet body material
Equipped with a "dust prevention shutter" to prevent dust entry when not in use.
Furthermore, it uses heat-resistant thermosetting resin that is less likely to melt in case of heat generation, effectively preventing electrical fires.
Cable
Uses a double-coated cord compliant with the Japan Wiring System Industry Association standard (JWDS0010). Effective in preventing electric shock and fire caused by disconnection or damage to the coating.
Lightning surge function
Equipped with a device (varistor) that absorbs lightning surges up to 12,500V caused by induced lightning, protecting connected devices. (Maximum surge voltage of 12,500V is based on JEC210/212 standards. Performance may degrade depending on received voltage and number of surges.)
ECT-0620BK
ECT-0720BK
ECT-0620WH
ECT-0720WH
Add to cart
Add to cart
Add to cart
Add to cart
Customer reviews
4.4 out of 5 stars
5,031 reviews
4.4 out of 5 stars
5,031 reviews
4.4 out of 5 stars
5,031 reviews
4.4 out of 5 stars
5,031 reviews
Price
3,783 yen
3,783 yen
3,920 yen
3,920 yen
3,934 yen
3,934 yen
4,490 yen
4,490 yen
8 or 12 outlets, 8 or 12 outlets
5 USB-A ports
Cable length 2.0m
ECT-2120BK
ECT-2220BK
ECT-2120WH
ECT-2220WH
Add to cart
Add to cart
Add to cart
Add to cart
Customer reviews
4.4 out of 5 stars
5,031 reviews
4.1 out of 5 stars
221 reviews
4.4 out of 5 stars
5,031 reviews
5 out of 5 stars
| Product # |
202506122201394549550174725 |