Code: 4549550207577

Brand: Elecom (ELECOM)

Model: ECT-1430WH

Product color: White

Product size: Height 0.1, Width 11, Depth 14

Product weight: 380

About this product
This is a 3-outlet power strip with a two-pin plug and a clip mechanism that allows it to be clamped onto desks or similar surfaces.
It is convenient for temporary installation when working remotely or doing homework on dining tables or other surfaces where the power strip cannot be permanently installed.
It can be installed on boards with a thickness of 15mm to 35mm. When installing, ensure the outlet faces upward.
The contact surface with the board is made of rubber, providing scratch prevention and anti-slip effects.
The lower grip is equipped with a hanging hole of 10mm diameter, allowing it to be hung on wall hooks or similar when not in use.
It features a dust prevention shutter to prevent dust ingress when the plug is not inserted into the outlet.
The outlet uses heat-resistant thermosetting resin, which is less likely to melt even if it heats up unexpectedly, helping to prevent electrical fires.
Increases the number of display items, Brand: Elecom (ELECOM)
Color: White
Total power outlets: 3
Voltage: 125 volts
Features: Surge protection, About this product
This is a 3-outlet power strip with a two-pin plug and a clip mechanism that allows it to be clamped onto desks or similar surfaces.
It is convenient for temporary installation when working remotely or doing homework on dining tables or other surfaces where the power strip cannot be permanently installed.
It can be installed on boards with a thickness of 15mm to 35mm. When installing, ensure the outlet faces upward.
The contact surface with the board is made of rubber, providing scratch prevention and anti-slip effects.
The lower grip is equipped with a hanging hole of 10mm diameter, allowing it to be hung on wall hooks or similar when not in use.
It features a dust prevention shutter to prevent dust ingress when the plug is not inserted into the outlet.
The outlet uses heat-resistant thermosetting resin, which is less likely to melt even if it heats up unexpectedly, helping to prevent electrical fires.
Increase the number of display items

Shipping size: Height 13.6, Width 13.3, Depth 10.4

Shipping weight: 470

Specifications
Main body outlet shape: 2-pin
Number of outlets: 3
Plug specifications: 2-pin
Includes 3-pin to 2-pin adapter:
Cord length: 3.0m
Rated: Up to 125V/15A/1500W
Switch:
Surge protection:
Dust cover:
Insulated plug with cap:
Outlet cap included:
Power indicator lamp:
Double insulation:
Retaining function:
Swing plug:
Magnet:
Fixing method: Temporary fixation using clip (compatible with 15mm~35mm) or hanging hole (φ10mm).
Noise filter:
Modular jack included:
Color: White
Material: Main body: ABS resin, Plug: PVC, Outlet: Urea resin
External dimensions: Width 110mm, Depth 140mm, Height 80mm (excluding cord and plug parts)
Weight: approximately 380g
Usable region: Japan only
Electrical appliance law: PSE compliant
Warranty period: 1 year
Other: Clip shape allows easy temporary fixation on desks, etc.

Description
This is a 3-outlet power strip with a two-pin plug and a clip mechanism that allows it to be clamped onto desks or similar surfaces.
It is convenient for temporary installation when working remotely or doing homework on dining tables or other surfaces where the power strip cannot be permanently installed.
It can be installed on boards with a thickness of 15mm to 35mm. When installing, ensure the outlet faces upward.
The contact surface with the board is made of rubber, providing scratch prevention and anti-slip effects.
The lower grip is equipped with a hanging hole of 10mm diameter, allowing it to be hung on wall hooks or similar when not in use.
It features a dust prevention shutter to prevent dust ingress when the plug is not inserted into the outlet.
The outlet uses heat-resistant thermosetting resin, which is less likely to melt even if it heats up unexpectedly, helping to prevent electrical fires.
To prevent interference when connecting large plugs such as AC adapters, the outlets are arranged with their directions changed at the center and ends.
It is equipped with a varistor that absorbs lightning surges up to 12,500V caused by induced lightning, protecting connected devices. (Surge voltage of 12,500V is based on JEC210/212 standards. Performance may degrade depending on the voltage and number of surges experienced.)
The 2-pin plug is equipped with an insulating sleeve to prevent fires caused by tracking phenomena.
Adopts a 180-degree swing plug for easier wiring in tight spaces.
The power cord uses a double-insulated cable compliant with the Japan Wiring System Industry Association standard (JWDS0010), which helps prevent electric shock and fire caused by disconnection or damage to the insulation.
This product meets at least one of our internal environmental standards and displays the 'THINK ECOLOGY' mark.
It is committed to environmental conservation, reducing the plastic weight in its packaging containers by more than 20% compared to our standard products.
It is environmentally friendly, with packaging made solely of paper, cardboard, or poly bags.

Product inquiries
Elecom General Information Center
TEL. 0570-084-465
FAX. 0570-050-012
Reception hours / 10:00~19:00, open year-round, brand introduction



Tower-type design tap

Visit store


Magnet-equipped tap

Visit store


10-outlet switch-equipped tap

Visit store


USB-equipped tap

Visit store


Woodgrain design tap

Visit store



Elecom Co., Ltd. is dedicated to enhancing your lifestyle through peripheral devices for smartphones, tablets, and computers. Manufacturer's description

It is convenient for temporary installation when working remotely or doing homework on dining tables or other surfaces where the power strip cannot be permanently installed.

It can be installed on boards with a thickness of 15mm to 35mm. When installing, ensure the outlet faces upward.

The contact surface with the board is made of rubber, providing scratch prevention and anti-slip effects.

The lower grip is equipped with a hanging hole of 10mm diameter, allowing it to be hung on wall hooks or similar when not in use.

To prevent interference when connecting large plugs such as AC adapters, the outlets are arranged with their directions changed at the center and ends.

It features a dust prevention shutter to prevent dust ingress when the plug is not inserted into the outlet.

The 2-pin plug is equipped with an insulating sleeve to prevent fires caused by tracking phenomena.

It is equipped with a varistor that absorbs lightning surges up to 12,500V caused by induced lightning, protecting connected devices.

If you care about both function and design

Tower-type power strip (8 outlets)

Clip power strip (3 outlets)

Power strip (7 outlets)

Power strip (10 outlets)

Woodgrain power strip (6 outlets)

USB power strip (4 USB ports, 2 outlets)


カートに入れる

カートに入れる

カートに入れる

カートに入れる

カートに入れる

カートに入れる

カスタマーレビュー
5つ星のうち4.4
5,030

5つ星のうち4.4
2,663

5つ星のうち4.4
897

5つ星のうち4.5
11,344

5つ星のうち4.4
2,765

5つ星のうち4.3
4,798

価格
3,783
3,783
1,665
1,665
2,190
2,190
1,782
1,782
1,880
1,880
2,380
2,380
特徴USBポートや差込口は360度放射状に配しており、会議室の机などでの利用が可能です。設けた穴を活用することでネジによる仮固定もできます。クリップ機構を搭載し、机などに挟んで利用することができる2ピン式の3個口タップです。可動式の脚パーツを活用することで、電源アダプタなど重いものを差し込んでも横転しにくく、設けた穴にフックを通すことで壁などに吊るすこともできます。倒れにくく、壁などに吊れて固定できる便利な10口タップ。インテリアに馴染む木目調デザイン。差込口の間隔が広くACアダプタもすっきり接続できるスリムタップ。スマホもパソコンもこれ1台で充電。 2つのAC差込口と4つのUSBポートが一体になったケーブルタイプのモバイルUSBタップ。