Code: 4549550207560

Brand: Elecom (ELECOM)

Model: ECT-1430BK

Product color: Black

Product size: Height 0.1, Width 14, Depth 11

Product weight: 380

About this product
This is a 3-outlet power strip with a two-pin plug and a clip mechanism that allows it to be clamped onto desks or similar surfaces.
It is convenient for temporary installation when working remotely or doing homework on dining tables or other surfaces where the power strip cannot be permanently installed.
It can be installed on boards with a thickness of 15mm to 35mm. When installing, ensure the outlets face upward.
The contact surface with the board is made of rubber, providing scratch prevention and anti-slip effects.
The lower grip features a hanging hole with a diameter of 10mm, allowing it to be hung on wall hooks or similar when not in use.
It is equipped with a dust prevention shutter to prevent dust ingress when the plug is not inserted into the outlet.
The outlets are made of heat-resistant thermosetting resin, which is less likely to melt even if heat is generated unexpectedly, helping to prevent electrical fires.
Display item count increased, Brand: Elecom (ELECOM)
Color: Black
Total power outlets: 15
Voltage: 125 volts
Features: Non-slip | Scratch prevention About this product
This is a 3-outlet power strip with a two-pin plug and a clip mechanism that allows it to be clamped onto desks or similar surfaces.
It is convenient for temporary installation when working remotely or doing homework on dining tables or other surfaces where the power strip cannot be permanently installed.
It can be installed on boards with a thickness of 15mm to 35mm. When installing, ensure the outlets face upward.
The contact surface with the board is made of rubber, providing scratch prevention and anti-slip effects.
The lower grip features a hanging hole with a diameter of 10mm, allowing it to be hung on wall hooks or similar when not in use.
It is equipped with a dust prevention shutter to prevent dust ingress when the plug is not inserted into the outlet.
The outlets are made of heat-resistant thermosetting resin, which is less likely to melt even if heat is generated unexpectedly, helping to prevent electrical fires.
Display item count increased

Shipping size: Height 13.6, Width 13.3, Depth 10.4

Shipping weight: 460

Specifications
Main body outlet shape: 2-pin
Number of outlets: 3
Plug type: 2-pin
Includes 3-pin to 2-pin adapter:
Cord length: 3.0m
Rated: Up to 125V/15A/1500W
Switch:
Lightning guard:
Dust cover:
Insulated cap included:
Outlet cap included:
Power indicator lamp:
Double insulation:
Anti-slip function:
Swing plug:
Magnet:
Fixing method: Temporary fixation using clip (compatible with 15mm~35mm) or hanging hole (φ10mm).
Noise filter:
Modular jack included:
Color: Black
Material: Main body: ABS resin, Plug: PVC, Outlet: Urea resin
External dimensions: Width 110mm, Depth 140mm, Height 80mm (excluding cord and plug parts)
Mass: approximately 380g
Usable region: Japan only
Electrical appliance law: PSE compliant
Warranty period: 1 year
Other: Can be temporarily fixed to desks etc. with a clip shape.

Description
This is a 3-outlet power strip with a two-pin plug and a clip mechanism that allows it to be clamped onto desks or similar surfaces.
It is convenient for temporary installation when working remotely or doing homework on dining tables or other surfaces where the power strip cannot be permanently installed.
It can be installed on boards with a thickness of 15mm to 35mm. When installing, ensure the outlets face upward.
The contact surface with the board is made of rubber, providing scratch prevention and anti-slip effects.
The lower grip features a hanging hole with a diameter of 10mm, allowing it to be hung on wall hooks or similar when not in use.
It is equipped with a dust prevention shutter to prevent dust ingress when the plug is not inserted into the outlet.
The outlets are made of heat-resistant thermosetting resin, which is less likely to melt even if heat is generated unexpectedly, helping to prevent electrical fires.
To prevent interference when connecting large plugs such as AC adapters, the outlets are arranged with their directions changed at the center and ends.
It features a component (varistor) that absorbs lightning surges up to 12,500V caused by induced lightning, protecting connected devices. (Surge voltage of 12,500V is based on JEC210/212 standards. Performance may degrade depending on the voltage and number of surges received.)
The 2-pin plug is equipped with an insulating sleeve to prevent fires caused by tracking phenomena.
Adopts a 180-degree swing plug for easier wiring in tight spaces.
The power cord uses a double-insulated cable compliant with the Japan Wiring System Industry Association standard (JWDS0010), effectively preventing electric shock and fire caused by disconnection or damage to the insulation.
This product meets at least one of our internal environmental certification standards and displays the 'THINK ECOLOGY' mark.
It is environmentally conscious, with packaging that reduces plastic weight by over 20% compared to our standard products.
It is environmentally conscious, with packaging made solely of paper, cardboard, or poly bags.

Product inquiries
Elecom General Information Center
TEL. 0570-084-465
FAX. 0570-050-012
Reception hours / 10:00~19:00, open year-round Brand introduction



Tower-type design tap

Visit store


Magnet-equipped tap

Visit store


10-outlet switchable tap

Visit store


USB-equipped tap

Visit store


Woodgrain finish tap

Visit store



Elecom Co., Ltd. is committed to enhancing your lifestyle through peripheral devices for smartphones, tablets, and computers. Manufacturer's description

It is convenient for temporary installation when working remotely or doing homework on dining tables or other surfaces where the power strip cannot be permanently installed.

It can be installed on boards with a thickness of 15mm to 35mm. When installing, ensure the outlets face upward.

The contact surface with the board is made of rubber, providing scratch prevention and anti-slip effects.

The lower grip features a hanging hole with a diameter of 10mm, allowing it to be hung on wall hooks or similar when not in use.

To prevent interference when connecting large plugs such as AC adapters, the outlets are arranged with their directions changed at the center and ends.

It is equipped with a dust prevention shutter to prevent dust ingress when the plug is not inserted into the outlet.

The 2-pin plug is equipped with an insulating sleeve to prevent fires caused by tracking phenomena.

It features a varistor that absorbs lightning surges up to 12,500V caused by induced lightning, protecting connected devices.

If you care about both function and design

Tower-type power strip (8 outlets)

Clip power strip (3 outlets)

Power strip (7 outlets)

Power strip (10 outlets)

Woodgrain finish power strip (6 outlets)

USB power strip (4 USB ports, 2 outlets)


カートに入れる

カートに入れる

カートに入れる

カートに入れる

カートに入れる

カートに入れる

カスタマーレビュー
5つ星のうち4.4
5,024

5つ星のうち4.4
2,646

5つ星のうち4.4
893

5つ星のうち4.5
11,327

5つ星のうち4.4
2,764

5つ星のうち4.3
4,790

価格
3,590
3,590
1,510
1,510
1,970
1,970
1,782
1,782
1,690
1,690
2,040
2,040
特徴USBポートや差込口は360度放射状に配しており、会議室の机などでの利用が可能です。設けた穴を活用することでネジによる仮固定もできます。クリップ機構を搭載し、机などに挟んで利用することができる2ピン式の3個口タップです。可動式の脚パーツを活用することで、電源アダプタなど重いものを差し込んでも横転しにくく、設けた穴にフックを通すことで壁などに吊るすこともできます。倒れにくく、壁などに吊れて固定できる便利な10口タップ。インテリアに馴染む木目調デザイン。差込口の間隔が広くACアダプタもすっきり接続できるスリムタップ。スマホもパソコンもこれ1台で充電。 2つのAC差込口と4つのUSBポートが一体になったケーブルタイプのモバイルUSBタップ。