Code:4549550251587

Brand:ELECOM

Specification: T-X01M-2125WH

Product color: White

Size information: 2.5m

Product size: Height 2.4, Width 6, Depth 3.3

Product weight: 225

About this product
This is a cord to extend power supply when the device's cord cannot reach the outlet. It can be used with polarized 2-pin plugs and 3-pin plugs. A magnet is embedded on the bottom of the main body, allowing it to be attached to steel furniture when not in use. It features a tracking prevention plug and dust prevention shutter to prevent accidents during use, ensuring safe operation. When using a 3-pin plug, the ground function does not operate.
This is a cord to extend power supply when the device's cord cannot reach the outlet.
The outlet has one port and is compatible with polarized 2-pin plugs (type with different widths for left and right pins) and 3-pin plugs.
The ground function does not operate when using a 3-pin plug.
There is no polarity in the power plug.
If polarity matching is required for connected devices, insert the plug so that the longer hole of the outlet aligns with the marked line side of the power plug.
Equipped with a "dust prevention shutter" to prevent dust from entering the outlet when not in use.
Display item count increase Brand: ELECOM
Color: White
Total number of power outlets: 15
Voltage: 125 volts
Product weight: 225 grams About this product
This is a cord to extend power supply when the device's cord cannot reach the outlet. It can be used with polarized 2-pin plugs and 3-pin plugs. A magnet is embedded on the bottom of the main body, allowing it to be attached to steel furniture when not in use. It features a tracking prevention plug and dust prevention shutter to prevent accidents during use, ensuring safe operation. When using a 3-pin plug, the ground function does not operate.
This is a cord to extend power supply when the device's cord cannot reach the outlet.
The outlet has one port and is compatible with polarized 2-pin plugs (type with different widths for left and right pins) and 3-pin plugs.
The ground function does not operate when using a 3-pin plug.
There is no polarity in the power plug.
If polarity matching is required for connected devices, insert the plug so that the longer hole of the outlet aligns with the marked line side of the power plug.
Equipped with a "dust prevention shutter" to prevent dust from entering the outlet when not in use.
Display item count increase

Shipping size: Height 20.9, Width 12.2, Depth 3.4

Shipping weight: 230

Specifications
Main body outlet shape: 2-pin (compatible with polarized 2-pin plugs, 3-pin plugs, no ground function)
Main body outlet quantity: 1
Plug specifications: 2-pin
Cord length: 2.5m
Rated: Up to 125V/15A/1500W
Dust shutter:
Anti-slip function:
Outlet cap included:
Switch:
Lightning guard:
Noise filter:
Modular jack included:
Magnet:
Power indicator lamp:
Fixation method: Temporary fixation with magnet
Double insulation:
Swing plug:
Insulated cap included plug:
3-pin to 2-pin conversion adapter included:
Color: White
Material: PVC resin, Urea resin, Polycarbonate resin
External dimensions: Width 33mm, Depth 60mm, Height 24mm (excluding cord and plug parts)
Mass: 225g
Usable area: Japan only
Electrical appliance safety law: PSE compliant
Warranty period: 1 year

Description
This is a cord to extend power supply when the device's cord cannot reach the outlet.
The outlet has one port and is compatible with polarized 2-pin plugs (type with different widths for left and right pins) and 3-pin plugs.
The ground function does not operate when using a 3-pin plug.
There is no polarity in the power plug.
If polarity matching is required for connected devices, insert the plug so that the longer hole of the outlet aligns with the marked line side of the power plug.
Equipped with a "dust prevention shutter" to prevent dust from entering the outlet when not in use.
Some outlets use heat-resistant thermosetting resin, which is less likely to melt even if heat is generated, helping prevent electrical fires.
A magnet is embedded on the bottom of the main body, allowing it to be attached to steel furniture when not in use.
The power cord uses a double-insulated cord compliant with Japan Wiring System Industry Association standards (JWDS0010), effective in preventing electric shock and fires caused by wire disconnection or damage.
The plug incorporates thermosetting resin between the blades to prevent tracking phenomena that can cause fires, and features an insulation sleeve to reduce the risk of electric shock.
Adopts a 180-degree swing plug for easy wiring in tight spaces.
This product reduces plastic weight in the packaging container by more than 20% compared to in-house standard products.
The product's packaging consists only of paper, cardboard, and plastic bags.

Inquiries about the product
ELECOM General Information Center
TEL. 0570-084-465
FAX. 0570-050-012
Service hours / 10:00~19:00, open year-round Brand introduction



Tower type design tap

Access store


Magnet-equipped tap

Access store


10-outlet tap with switch

Access store


USB-equipped tap

Access store


Wood grain style tap

Access store



ELECOM Inc. aims to enhance customer lifestyles through peripherals such as smartphones, tablets, and computers. Manufacturer's description
Magnet-equipped power extension cord compatible with devices having polarity

Compatible with polarized 2-pin plugs and 3-pin plugs. A magnet is embedded on the bottom of the main body, allowing it to be attached to steel furniture when not in use. It features tracking prevention plugs and dust prevention shutters to prevent accidents during use. When using a 3-pin plug, the ground function does not operate.

Structure that allows connection of 2-pin and 3-pin plugs

The outlet has one port and is compatible with polarized 2-pin plugs (type with different widths for left and right pins) and 3-pin plugs. The ground function does not operate when using a 3-pin plug.

Allows connection of polarized plugs used in smart plugs and similar devices

Can connect polarized plugs with one blade wider than the other

If polarity matching is necessary for connected devices, insert so that the longer hole of the outlet aligns with the marked line side of the power plug. There is no polarity in the power plug.

Magnet-equipped

A magnet is embedded on the bottom of the main body, allowing it to be attached to steel furniture when not in use.


T-X01-21WH series

T-X01M-21WH series

T-X01S-21WH series

T-ADR1 series


Add to cart

Add to cart

Purchase options

Add to cart

Customer reviews
4.4 out of 5 stars
1,881

4.4 out of 5 stars
56

4.6 out of 5 stars
54

4.4 out of 5 stars
3,028

Price
618
618
1,629
1,629—
no data

417
417
Features: Equipped with hanging holes for hooks, etc., and a silicone tag on the bottom of the main body. It can be fixed with included magnetized tapping screws (M3 16) suitable for wide AC adapters that can be attached to steel furniture.
Main body outlet shape: 2-pin (compatible with polarized 2-pin plugs, 3-pin plugs, no ground function) 2-pin (compatible with polarized 2-pin plugs, 3-pin plugs, no ground function) 2-pin (compatible with polarized 2-pin plugs, 3-pin plugs, no ground function) 2-pin
Cord length (m): 0.1 / 0.5 / 1.0 / 2.0 / 3.0 / 5.0 / 2.5 / 5.0 / 2.5 / 5.0 / 0.1
Color: White / White / White / White / Black