Code: 4549550303156

Brand: ELECOM

Standard: ECT-3015WH

Product color: White

Size information: 1.5m

Product size: Height 0.1, Width 10.3, Depth 13.4

Product weight: 335g

About this product
This is a power strip with a USB-A port equipped with a clip mechanism that can be attached to desks and similar surfaces. It can be used not only while clamped but also temporarily placed on dining tables or other surfaces where the strip cannot be permanently installed. It is convenient for using cooking appliances like hot plates, teleworking, or doing homework. The cord length is approximately 1.5m.
It features three AC outlets and two USB-A ports, allowing charging via USB cable as well.
It can be temporarily placed on dining tables or other surfaces where the strip cannot be permanently installed. It is useful for using cooking appliances like hot plates, teleworking, or doing homework.
It can be installed on boards with a thickness of approximately 15 to 35mm. When installing, ensure the USB-A port faces upward.
To prevent interference with neighboring outlets when connecting large plugs such as AC adapters, each outlet is oriented differently.
› See more Brand: ELECOM
Color: White
Total number of power outlets: 5
Voltage: 125 volts
Features: USB slot, Mountable, Surge protection About this product
This is a power strip with a USB-A port equipped with a clip mechanism that can be attached to desks and similar surfaces. It can be used not only while clamped but also temporarily placed on dining tables or other surfaces where the strip cannot be permanently installed. It is convenient for using cooking appliances like hot plates, teleworking, or doing homework. The cord length is approximately 1.5m.
It features three AC outlets and two USB-A ports, allowing charging via USB cable as well.
It can be temporarily placed on dining tables or other surfaces where the strip cannot be permanently installed. It is useful for using cooking appliances like hot plates, teleworking, or doing homework.
It can be installed on boards with a thickness of approximately 15 to 35mm. When installing, ensure the USB-A port faces upward.
To prevent interference with neighboring outlets when connecting large plugs such as AC adapters, each outlet is oriented differently.
› See more

Shipping size: Height 14.2, Width 13.2, Depth 10.9

Shipping weight: 410g

Specifications
Outlet specifications: 2-pin (polarized 2-pin plug also compatible)
Number of outlets: 3
Plug specifications: 2-pin
AC cord length: 1.5m
USB terminal shape: USB-A port 2
AC side rated: 14A, 125V, up to 1400W total
USB side rated input: AC100V-240V, 50/60Hz, 0.5A MAX
USB side rated output (when using 1 port): 12W (5V/2.4A)
USB side rated output (when using 2 ports): total 12W (5V/2.4A), each port 12W (5V/2.4A)
Polarity support: (outlets are compatible, plugs are marked only)
Switch:
Lightning guard:
Dust shutter: (AC outlets only)
Retaining function:
Outlet caps: (USB ports only)
Power indicator lamp:
Dual structure:
Double coating:
Insulated plug with cap:
Swing plug:
Fixation method: Temporarily fixed to desks or similar surfaces using a clip mechanism
Magnet:
Hanging hole: (φ10mm)
Circuit breaker:
Noise filter:
Modular jack:
Interlock function:
Conversion adapter:
Color: White
Material: Polycarbonate resin, PVC resin, Urea resin, Brass, Copper
External dimensions: Width approximately 114mm, Depth approximately 149mm, Height approximately 70mm (excluding cord and plug parts)
Weight: approximately 335g
Accessories: Instruction manual
Environmental considerations: THINK ECOLOGY compliant product
Usable region: Japan only
Regulations: PSE (Specified Electrical Appliances)
Warranty period: 1 year

Description
This is a power strip with a clip mechanism that can be attached to desks and similar surfaces, equipped with USB-A ports.
It features three AC outlets and two USB-A ports, allowing charging via USB cable as well.
It can be temporarily placed on dining tables or other surfaces where the strip cannot be permanently installed. It is useful for using cooking appliances like hot plates, teleworking, or doing homework.
It can be installed on boards with a thickness of approximately 15 to 35mm. When installing, ensure the USB-A port faces upward.
To prevent interference with neighboring outlets when connecting large plugs such as AC adapters, each outlet is oriented differently.
The contact surface with the board is made of rubber, providing scratch prevention and anti-slip effects.
The lower grip features a hanging hole of approximately 10mm in diameter, allowing it to be hung on wall hooks or similar when not in use.
It is equipped with a dust prevention shutter to prevent dust ingress when the plug is not inserted into the outlet.
The outlets use heat-resistant thermosetting resin, which is less likely to melt even if heat is generated, helping prevent electrical fires.
The blade receiving metal inside the outlet is made of 0.8mm thick material that resists deformation. Repeated plugging and unplugging will not significantly reduce the plug's holding force, and it suppresses heat generation at the outlet.
It is equipped with a device (varistor) that absorbs lightning surges up to a maximum of 12,500V caused by induced lightning, protecting connected devices. (Maximum surge voltage of 12,500V is based on JEC210/212 standards. Performance may degrade depending on the voltage and number of surges received.)
Two-pin plugs with different blade widths due to polarity can also be connected to the outlets.
There is no polarity difference in the power plug, but if the polarity needs to be matched for connected devices, insert the plug so that the longer hole of the outlet and the "E" mark (the side with only "ELECOM" written) on the power plug align.
The power plug is equipped with an insulating sleeve made of heat-resistant resin, which is effective in preventing tracking phenomena that cause fires and reduces the risk of electric shock.
The 180-degree swing plug makes wiring easier even in tight spaces.
The power cord uses a double-insulated cable compliant with Japan Wiring System Industry Association standards (JWDS0010), which helps prevent electric shock and fire caused by disconnection or damage to the insulation.
It is a flexible, easy-to-handle flat two-core cable.
It meets at least one of the company's environmental certification standards and displays the "THINK ECOLOGY" mark.
It is environmentally conscious, with packaging that reduces plastic weight by over 20% compared to internal standards.
It is environmentally conscious, with packaging made only of paper, cardboard, or plastic bags. Brand introduction



Tower-type design tap

Visit store


Magnet-equipped tap

Visit store


10-outlet tap with switch

Visit store


USB-equipped tap

Visit store


Wood grain style tap

Visit store



ELECOM Inc. aims to enhance customers' lifestyles through peripheral devices such as smartphones, tablets, and PCs. Manufacturer's description

It can be used not only while clamped but also to temporarily place power on surfaces like dining tables where the strip cannot be permanently installed. It is useful for using cooking appliances like hot plates, teleworking, or doing homework.

It is less likely to interfere with neighboring outlets.

To prevent interference with neighboring outlets when connecting large plugs such as AC adapters, each outlet is oriented differently.

With anti-slip features

The contact surface with the board is made of rubber, providing scratch prevention and anti-slip effects.

It can be installed on boards with a thickness of approximately 15 to 35mm.

It can be installed on boards with a thickness of approximately 15 to 35mm.

When installing, ensure the USB-A port faces upward.

Features a hanging hole on the lower grip

The lower grip features a hanging hole of approximately 10mm in diameter, allowing it to be hung on wall hooks or similar when not in use.


ECT-24425BK

ECT-23325BK

ECT-25215WH

ECT-0415WH

ECT-03WH

ECT-1802WH


Purchase options

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Customer reviews
4.2 out of 5 stars
90

4.4 out of 5 stars
410

4.2 out of 5 stars
300

4.3 out of 5 stars
4,799

4.0 out of 5 stars
3,571

4.2 out of 5 stars
603

Price—
no data

3,490
3,490
3,490
3,490
2,380
2,380
1,780
1,780
1,999
1,999
Number of AC outlets: 4, 6, 3, 2, 4, 2, 2, 3
Number of USB ports: USB-C / 2 ports, USB-A / 2 ports, USB-C / 1 port, USB-A / 2 ports, USB-C / 1 port, USB-A / 2 ports, USB-A / 4 ports, USB-A / 3 ports, USB-C / 1 port, USB-A / 1 port
Total USB output: USB-C ports up to 45W, USB-A ports up to 12W; USB-C ports up to 30W, USB-A ports up to 12W; USB-C ports up to 20W, USB-A ports up to 12W; total maximum 17W; total maximum 12W; USB-C port up to 15W, USB-A port up to 12W
Colors: Black, White; Black, White; Black, White; Black, White; White; Oak; Walnut; Black, White; White
Cord length: 2.5m; 2.5m; 1.5m; 3m; 1.5m; 2m; 2m
Switch
Walls mounting -
no data

Lightning guard
Dust shutter (AC outlets only) (USB ports have plug-in covers) (AC outlets only) (USB ports have plug-in covers)