Code: 4549550303149

Brand: Elecom (ELECOM)

Model: ECT-3015BK

Product color: Black

Size information: 1.5m

Product size: Height 0.1, Width 10.3, Depth 13.4

Product weight: 335

About this product
This is a power strip with a clip mechanism that can be attached to desks and similar surfaces, equipped with a USB-A port. It can be used not only while constantly clamped but also to temporarily set up power on dining tables or other surfaces where a permanent power strip cannot be installed. It is convenient for using cooking appliances like hot plates, teleworking, or doing homework. The cord length is approximately 1.5m.
It can be installed on boards approximately 15 to 35mm thick. When installing, ensure the USB-A port faces upward.
To prevent interference with neighboring outlets when connecting large plugs such as AC adapters, each outlet is oriented differently.
The contact surface with the board is made of rubber, providing scratch prevention and anti-slip effects.
The lower grip features a hanging hole with a diameter of about 10mm, allowing it to be hung on wall hooks or similar when not in use.
› See more brands Elecom (ELECOM)
Color: Black
Total number of power outlets: 5
Voltage: 125 volts
Features: USB slot, Mountable, Surge protection About this product
This is a power strip with a clip mechanism that can be attached to desks and similar surfaces, equipped with a USB-A port. It can be used not only while constantly clamped but also to temporarily set up power on dining tables or other surfaces where a permanent power strip cannot be installed. It is convenient for using cooking appliances like hot plates, teleworking, or doing homework. The cord length is approximately 1.5m.
It can be installed on boards approximately 15 to 35mm thick. When installing, ensure the USB-A port faces upward.
To prevent interference with neighboring outlets when connecting large plugs such as AC adapters, each outlet is oriented differently.
The contact surface with the board is made of rubber, providing scratch prevention and anti-slip effects.
The lower grip features a hanging hole with a diameter of about 10mm, allowing it to be hung on wall hooks or similar when not in use.
› See more

Shipping size: Height 14.3, Width 13.1, Depth 10.9

Shipping weight: 400

Specifications
Outlet type: 2-pin (polarized 2-pin plugs can also be connected)
Number of outlets: 3 outlets
Plug type: 2-pin
AC cord length: approximately 1.5m
USB terminal shape: USB-A port 2
AC side rated: 14A, 125V, up to a total of 1400W
USB side rated input: AC 100V-240V, 50Hz/60Hz, 0.5A MAX
USB side rated output: When using 1 port: 12W (5V/2.4A)
USB side rated output: When using 2 ports: total 12W (5V/2.4A), each port 12W (5V/2.4A)
Polarity support: (outlets are supported, power plug is only marked)
Switch:
Lightning guard:
Dust shutter: (for AC outlets only, USB ports have caps)
Retaining function:
Outlet cap: (for USB ports only)
Power indicator lamp:
Double structure:
Double coating:
Insulation cap plug:
Swing plug:
Fixing method: Temporarily fixed to desks, etc., using the clip mechanism
Magnet:
Hanging hole: (φ about 10mm)
Breaker:
Noise filter:
Modular jack:
Interlock function:
Conversion adapter:
Color: Black
Material: Polycarbonate resin, PVC resin, Urea resin, Brass, Copper
External dimensions: Width approximately 114mm, Depth approximately 134mm, Height approximately 103mm, excluding cord and plug parts
Mass: approximately 335g
Accessories: Instruction manual
Environmental considerations: THINK ECOLOGY compliant product
Usable region: Japan only
Regulations: PSE (Specified Electrical Appliances)
Warranty period: 1 year

Description
This is a power strip with a clip mechanism that can be attached to desks and similar surfaces, equipped with a USB-A port.
It has 3 AC outlets and 2 USB-A ports, allowing charging via USB cable.
It can be temporarily installed on dining tables or other surfaces where a permanent power strip cannot be installed. It is convenient for using cooking appliances like hot plates, teleworking, or doing homework.
It can be installed on boards approximately 15 to 35mm thick. When installing, ensure the USB-A port faces upward.
To prevent interference with neighboring outlets when connecting large plugs such as AC adapters, each outlet is oriented differently.
The contact surface with the board is made of rubber, providing scratch prevention and anti-slip effects.
The lower grip features a hanging hole with a diameter of about 10mm, allowing it to be hung on wall hooks or similar when not in use.
Equipped with a 'dust prevention shutter' to prevent dust entry when plugs are not inserted into outlets.
The outlets use heat-resistant thermosetting resin, which is less likely to melt even if heat is generated, helping prevent electrical fires.
The blade receiving metal inside the outlet uses 0.8mm thick material that is resistant to deformation. Repeated plugging and unplugging will not significantly reduce the holding force, and it suppresses heat generation inside the outlet.
Equipped with a component (varistor) that absorbs lightning surges up to a maximum of 12,500V, protecting connected devices. (Maximum surge voltage of 12,500V is based on JEC210/212 standards. Performance may degrade depending on the voltage and number of surges experienced.)
Supports connecting 2-pin plugs with polarity-dependent blade widths.
The power plug does not have a difference in blade width due to polarity, but if the connected device requires matching polarity, insert the plug so that the 'ELECOM' logo (the side with only 'ELECOM') on the plug aligns with the longer hole of the outlet.
The power plug features heat-resistant thermosetting resin between the blades to prevent tracking phenomena that can cause fires, and is equipped with an insulating sleeve to reduce the risk of electric shock.
Adopts a 180-degree swing plug for easier wiring in tight spaces.
The power cord uses a double-insulated flat cord that complies with Japan Wiring System Industry Association standards (JWDS0010), effectively preventing disconnection or damage that could cause electric shock or fire.
Flexible, easy-to-handle parallel two-core flat cable.
This product meets at least one of our internal environmental certification standards and displays the 'THINK ECOLOGY' mark.
Committed to environmental conservation, this product's packaging reduces plastic weight by over 20% compared to our standard products.
This product's packaging consists solely of paper, cardboard, or plastic bags, supporting environmental conservation.

Inquiries about the product
Elecom General Information Center
TEL. 0570-084-465
FAX. 0570-050-012
Reception hours / 10:00 - 19:00, open year-round, explanation by manufacturer
Choosing the right power strip is also important to avoid risks associated with household wiring.
Convenient features by type of power strip

ECT-1430T-K6A-2630, ECT-1310, ECT-0201, ECT-2820B, ECT-3120WHT-KF, 2710B, ECT-3030BK

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Customer reviews
4.4 out of 5 stars
2,124

4.5 out of 5 stars
4,858

4.5 out of 5 stars
2,838

4.4 out of 5 stars
2,597

4.7 out of 5 stars
17

4.4 out of 5 stars
3

Price
1,699
1,699
1,899
1,899
1,999
1,999
1,999
1,999
3,199
3,199
2,599
2,599
AC outlets: 3 outlets, 6 outlets, 6 outlets, 6 outlets, 6 outlets, 6 outlets
Number of USB ports: ------
Colors: Black, White, Black, White, Brown, Pink Oak, Walnut Oak, Walnut Black, White
Cord lengths: 3m, 3m, 1m, 2m, 3m, 1m, 2m, 3m, 2m, 2m, 5m, 2m, 5m, 2m, 5m, 1m, 2m, 3m, 1.5m, 3m
Switch (individual switch) (individual switch) (individual switch)
Wall mounting (magnet & rotating parts) (magnet & rotating parts)
Lightning guard
Dust shutter
If you want not only functionality but also a focus on design

ECT-1530BKT-KM01-2620B, ECT-2620B, ECT-2620B, ECT-2620WHT-KF, 2710B, ECT-3030BK

Add to cart

Add to cart

Add to cart

Add to cart

View details

Add to cart

Customer reviews
4.6 out of 5 stars
3,705

4.6 out of 5 stars
1,061

4.5 out of 5 stars
9,975

4.5 out of 5 stars
4,411

4.5 out of 5 stars
552

—

Price
2,232
2,232
2,271
2,271
2,699
2,699
2,642
2,642—
3,099
3,099
AC outlets: 10 outlets, 6 outlets, 10 outlets, 10 outlets, 7 outlets, 3 outlets
Colors: Black, White, Black, White, Black, White, Black, White
Cord lengths: 1m, 2m, 3m, 5m, 1m, 2m, 3m, 5m, 2m, 5m, 2m, 5m, 1m, 2m, 3m
Installation method: Magnet, Magnet, Magnet + hanging legs, Magnet + hanging legs, Clip
Switch (main switch)
Lightning guard
Dust shutter