Code: 4549550344203

Brand: ELECOM

Standard: T-IS01M-2320WH

Product color: White

Size information: 2m

Product size: Height 0.1, Width 3.2, Depth 16.8

Product weight: 350

About this product
With individual switches for each outlet, you can turn the power ON/OFF for each socket. It reduces standby power consumption even when connected devices are turned off, helping to save electricity costs.
The individual switches are equipped with orange neon bulbs. When the switch is ON, it lights up orange, allowing you to check the status from a distance.
The spacing between outlets is 57mm for the wide spacing and 35mm for the narrow spacing. The outlets arranged with wide spacing make it less likely for large adapters to interfere with neighboring outlets.
The power switch is arranged diagonally, making it less likely to interfere when inserting large AC adapters, and it is easy to press to turn the power ON/OFF.
The bottom of the tap is equipped with a strong neodymium magnet that adheres firmly, making it difficult for heavy AC adapters inserted into the outlets to fall off. 15› More brand information ELECOM
› More brand information ELECOM
Color: White
Total number of power outlets: 3
Voltage: 125 volts
Product dimensions: 16.8cm length x 3.2cm width 25› More
With individual switches for each outlet, you can turn the power ON/OFF for each socket. It reduces standby power consumption even when connected devices are turned off, helping to save electricity costs.
The individual switches are equipped with orange neon bulbs. When the switch is ON, it lights up orange, allowing you to check the status from a distance.
The spacing between outlets is 57mm for the wide spacing and 35mm for the narrow spacing. The outlets arranged with wide spacing make it less likely for large adapters to interfere with neighboring outlets.
The power switch is arranged diagonally, making it less likely to interfere when inserting large AC adapters, and it is easy to press to turn the power ON/OFF.
The bottom of the tap is equipped with a strong neodymium magnet that adheres firmly, making it difficult for heavy AC adapters inserted into the outlets to fall off. 15› More brand information ELECOM
› More

Shipping size: Height 25, Width 7, Depth 6.3

Shipping weight: 405

Specifications
Outlet specifications: 2-pin (compatible with polarized 2-pin plugs)
Number of outlets: 3
Outlet spacing: 57mm, 35mm
Plug specifications: 2-pin
AC cord length: 2m
Rated voltage: 125V, 15A, up to 1500W
Polarity support: (outlets supported, plugs marked only)
Switch: (individual switches)
Lightning guard:
Dust shutter:
Retaining function:
Outlet caps:
Power indicator lamp: (individual switches)
Double structure:
Double coating:
Insulation cap plug:
Swing plug:
Magnet:
Hanging hole:
Circuit breaker:
Noise filter:
Modular jack:
Interlock function:
Conversion adapter:
Color: White
Material: ABS resin, PVC resin, Urea resin, Brass, Copper
External dimensions: Width approx. 168mm, Depth approx. 50mm, Height approx. 32mm (excluding cord and plug parts)
Weight: approx. 350g
Accessories: Instruction manual
Usable area: Japan only
Regulations: PSE (Specified Electrical Appliances)
Warranty period: 1 year

Description
With individual switches for each outlet, you can turn the power ON/OFF for each socket. It reduces standby power consumption even when connected devices are turned off, helping to save electricity costs.
The individual switches are equipped with orange neon bulbs. When the switch is ON, it lights up orange, allowing you to check the status from a distance.
The spacing between outlets is 57mm for the wide spacing and 35mm for the narrow spacing. The outlets arranged with wide spacing make it less likely for large adapters to interfere with neighboring outlets.
The power switch is arranged diagonally, making it less likely to interfere when inserting large AC adapters, and it is easy to press to turn the power ON/OFF.
The bottom of the tap is equipped with a strong neodymium magnet that adheres firmly, making it difficult for heavy AC adapters inserted into the outlets to fall off. 15› More brand information ELECOM
It is possible to connect 2-pin plugs with polarity differences, such as overseas smart plugs, to the outlets.
There is no polarity difference in the power plug's blade width.
If the connected device requires polarity matching, insert by aligning the longer hole of the outlet and the initial letter "E" side of the ELECOM logo (the side with only "ELECOM" written) on the power plug.
It is equipped with a surge current capacity of 3500A/1 time, 2500A/10 times, and a limit voltage of 935V max (500A 8/20μs) using a varistor, which absorbs lightning surges caused by induced lightning and protects connected devices. In case of direct lightning strikes or induced lightning with surges exceeding the element's tolerance, it may not protect connected devices. Performance degrades depending on the voltage and number of surges received.
The outer shell uses high flame-retardant ABS resin, and the inner shell uses heat-hardened resin (urea resin) in a double structure. It is resistant to melting in case of heat generation, which helps prevent electrical fires.
Equipped with a dust prevention shutter to prevent dust entry into the outlets when not in use.
Uses a 180-degree swing plug for easier wiring in narrow spaces.
The power cord uses a double-insulated cord compliant with the Japan Wiring System Industry Association standard (JWDS0010), which helps prevent electric shock and fire caused by wire disconnection or damage.
The flat parallel two-core cord is flexible and easy to handle.
The plug incorporates heat-hardened resin between the blades to prevent tracking phenomena that cause fires, and features an insulated sleeve to reduce the risk of electric shock.
The blade receiving metal fittings inside the outlets are made of 0.8mm thick material, which is resistant to deformation. Repeated plugging and unplugging do not significantly reduce the grip, and it suppresses heat generation in the outlets.
It meets at least one of our environmental certification standards and displays the "THINK ECOLOGY" mark.
It is designed with environmental conservation in mind, reducing plastic weight in the product's packaging containers by more than 20% compared to our standard products.
It is designed with environmental conservation in mind, with packaging made only of paper, cardboard, and plastic bags.

Customer inquiries about the product
ELECOM product support
Please check 8056.jp. Brand introduction


AC charger

Visit store


Tap

Visit store


Mobile battery

Visit store


Mouse

Visit store


Keyboard

Visit store



ELECOM Inc. is committed to enriching and making customers' lifestyles more comfortable through peripheral devices such as smartphones, tablets, and PCs. Manufacturer's description
Can be attached to desks or steel furniture with strong magnets, making it easy to use in various scenes such as offices or homes, with a 3-outlet tap

With individual switches for each outlet, you can turn the power ON/OFF for each socket. It reduces standby power consumption even when connected devices are turned off, helping to save electricity costs.

Features

Equipped with a dust prevention shutter to prevent dust entry into the outlets when not in use.

The spacing between outlets is 57mm for the wide spacing and 35mm for the narrow spacing. The outlets arranged with wide spacing make it less likely for large adapters to interfere with neighboring outlets.

Uses a 180-degree swing plug for easier wiring in narrow spaces.

The plug incorporates heat-hardened resin between the blades to prevent tracking phenomena that cause fires, and features an insulated sleeve to reduce the risk of electric shock.

The blade receiving metal fittings inside the outlets are made of 0.8mm thick material, which is resistant to deformation. Repeated plugging and unplugging do not significantly reduce the grip, and it suppresses heat generation in the outlets.

The power cord uses a double-insulated cord compliant with the Japan Wiring System Industry Association standard (JWDS0010), which helps prevent electric shock and fire caused by wire disconnection or damage.