"Product Specifications" Material: Stainless Steel Main body outer diameter: Approx. 89.5mm Height: Approx. 64mm Maximum width including 3 blades: Approx. 105mm Main body weight: Approx. 189g Shape: Cup type, 3 blades Use: For water seal type drain traps in kitchens and sinks. *May not fit depending on the sink manufacturer.
"Caution" *Install with the cup opening facing downwards and align the position of the 3 blades.
After installation, run water and confirm that the rim of the cup is submerged in the water seal within the drain trap.
*Do not use metal scouring pads, hard sponges, sponges containing abrasives, cleansers, or chlorine-based, acidic, or alkaline detergents.
This may cause scratches, discoloration, rust, or corrosion on the surface.
*When cleaning, use water or diluted neutral detergent and wash gently with a soft sponge.
After washing, rinse off the detergent thoroughly and wipe off any moisture.

"Please check the compatible size before replacing" This product is a replacement part for water seal type drain traps that use a removable cup-type odor-blocking stopper in kitchen sinks.
Main body outer diameter approx. 89.5mm, height approx. 64mm, maximum width including 3 blades approx. 105mm.
Since the specifications of drain traps vary by manufacturer and manufacturing period, please remove the currently used odor-blocking stopper and measure the main body diameter, height, blade position, and drain trap inner diameter before purchasing.

"Suppresses sewer odors and prevents flies with water seal" By installing the cup-type trap with the opening facing downwards and placing the rim of the cup in the water seal within the drain trap, the passage between the drain pipe and the indoor air is blocked by water.
For preventing sewer odors from sinks and kitchen sinks, and preventing the entry of pests such as flies.
After installation, run water and confirm that the rim of the cup is submerged in the water seal.

"Durable Stainless Steel Odor-Blocking Stopper Weighing Approx. 189g" This is a sturdy and weighty stainless steel odor-blocking stopper used around kitchen drains.
The main body weighs approximately 189g, making it durable and resistant to deformation from daily removal and repeated cleaning.
The inner and outer surfaces are finished to be uniform and smooth, with minimal unevenness or rough processing marks.
The finish is clean, with a smooth texture that is less likely to feel rough, and fingerprints or smudges from handling are less noticeable.

"Stable Support with 3 Blades and Smooth Edges" The 3-blade, 3-point support structure balances and supports the main body from three directions.
This reduces tilting or unstable movement on one side when used in a correctly sized drain.
The edges, from the cup opening to the 3 blades which are frequently touched, are rounded to minimize burrs and sharp catches, making it easy to handle during installation, removal, and cleaning.

"Simply Place Without Tools and Easy to Clean" Simply remove the current odor-blocking stopper, align the position of the 3 blades, and set it in the drain.
It can be easily replaced without tools.
The smooth stainless steel surface inside and out is designed to prevent slime, oil stains, and seasoning stains like soy sauce from sticking, and can be easily washed away with water and a sponge.
Recommended for replacing old odor-blocking stoppers, daily cleaning, and deep cleaning.

2026/09/03 14:04:43#71dc6847dc4e4919cb26f5ccf1a19d5a9e454c6f