Ships within 1-5 business days [Brand new unopened item]

Utilizing the increased weight at the end due to the carbon taper grip, further pursuing the balance of the rod.
The "operation feel" and "sensitivity" obtained from the balance are improved, and the new model of Tsukuyomi, the Omo Rig rod, 【Tsukuyomi (Tukuyomi) 610/610H】!!

Omo Rig has been a standard fishing method in Tottori for over ten years. Until just under ten years ago, it was a local fishing method enjoyed by modifying rods from other fish species, as there were no dedicated rods.

At that time, because fishing was often in areas with fast tidal currents, Omo Rig casting with sinkers around 100g was mainstream with rods ranging from 7.5ft to 8ft.
Among these, the two models "ST-metal," released as the first dedicated Omo Rig models, mainly in 7.5ft, were favored by Omo Rig enthusiasts and gained broad support.
The casting performance for sinkers around 100g, and the length and power needed to lift squid from fast tidal flows to reduce wrist load, were embodied in the "Captain" who has led Omo Rig in Tottori for many years, resulting in the "ST-metal 705" rod.
Originally a local method, Omo Rig has now expanded to various areas, increasing the number of users, and models tailored to different sea areas and situations are now needed.

Initially, when the ST-metal was released, it was popular as a model emphasizing overall ease of use and less fatigue, but as the number of Omo Rig users increased year by year,
the desire to catch more fish with a single line grew, leading to an evolution towards a concept focused on hooking fish.
The two models, Tsukuyomi "610," released this time, were designed with improved handling due to their shorter length, easier casting, and better visual sensitivity,
while maintaining the balance of the main model "705 (7.5ft)." They are carefully adjusted for "power and balance."

Furthermore, to enhance the responsiveness of the grip, the rear grip was changed to an integrated carbon taper grip.
These short Omo Rig rods, finished to a high standard and capable of handling various situations, are the "Tsukuyomi 610" and "Tsukuyomi 610H."
However, compared to 7.5ft, the shorter length slightly increases wrist load, and it is not possible to do everything with just the 610, and when casting with the same power, the 705 still has a slight advantage.
Using both models skillfully can lead to even better results. Please consider using them together with the 705 or 706H.
〇【Tsukuyomi 610】... The most standard model in the Tsukuyomi series, a shortened version of the "Tsukuyomi 705"!!
Not only in the "Tottori area," said to be the birthplace, but also in various other areas, the number of people practicing Omo Rig has increased, and considering overall balance and ease of handling, the length was pursued to be 610.
Recommended weight range is 15 to 30号, making it a versatile first rod.
Although the Tsukuyomi series originally has a structure with minimal wobble, shortening from 7.5ft to 6ft10inch has made it even sharper, improving operability.
In terms of casting, it can be used in a wide range of situations, including small boats and between the hulls, making it a nimble model.
〇【Tsukuyomi 610H】... A shortened version of "Tsukuyomi 706H"!!
Recommended weight range is 25 to 40号, roughly matching the capacity of 706H, while maintaining handling and casting performance, and balancing the short length.
In turbulent situations, 35 to 40号 are necessary, but Omo Rig also requires a certain level of casting performance.
If the rod is too stiff, casting is possible but it becomes difficult to detect bites at the tip, and wrist fatigue increases.
Also, many bites are lost due to line breakage during retrieval, so the balance was adjusted to avoid being too stiff or too soft.
Additionally, in situations requiring strong appeal, the Tsukuyomi 610H allows for sharp, strong jigs.
Especially in deep areas where strong appeal is needed, it can fully demonstrate its power.
全長: 6.10ft / 継数: 2本(センターカット)
適合ウェイト: 15～30号 / 適合ライン: PE 0.4～0.6号
特徴:｢スピニング対応モデル｣｢ティップ オレンジカラー+ライムグリーンスレッド｣｢ガイド チタンガイド｣｢ブランクス 4軸カーボンクロスラッピング｣｢リアグリップ 一体成型カーボンテーパーグリップ｣
【シリーズ: 月弓(つくよみ) 610 】……｢月弓(つくよみ)｣をベースに｢カーボンテーパーグリップ｣を新たに搭載することでエンド部の重量が増加! ｢操作感｣｢感度｣｢軽快な使用感｣を向上させたロッドバランスを持つNEWシリーズ!!
【モデル: 月弓 610 】……取り回し感･キャスト性能･目感度･反響感度を向上させたショートオモリグロッド! ｢月弓 610H｣は使用できる推奨重量25号～40号で、ディープエリアでの強アピールが必要なパターン下においては、その威力を存分に発揮出来るモデル｡